SD17A/0408: The erection of a palisade fence on a 450mm height concrete plinth (total height = 2400mm) along the east side of the property, 1000mm inside the boundary line, with an electric fence (total height = 4000mm). Electric fence fixed to internal leaf of palisade fence. (1) The erection of an electric fence (total height = 4000mm) along the south side of the property, fixed to internal leaf of existing palisade fence (total height = 4000mm). The existing palisade fence is erected approximately 2000mm inside the boundary line. (2) The erection of an electric fence (total height = 4000mm) along part of the west side of the property, fixed to internal leaf of existing palisade fence (total height = 4000mm). (3) The erection of a palisade fence on a concrete plinth (total height - 2400mm) along the north side of the existing building, 1800mm in front of the building along which will incorporate 6 pedestrian turnstiles for pedestrian access and egress. (4) Replacement of 2 existing double leaf palisade gates with 4 sliding gates along the north elevation, at each end of the building. (5) The modification to the south elevation of the building to create 8 security vehicle access traps as per drawing. (6) The modification of the east elevation of the building, removal of 3 roller shutters and replacement with 5 windows at ground floor level. (7) 2 new escape doors to the south elevation. (8) Installation of 3 new windows at ground floor level on the south elevation at the south east corner. (9) Associated internal fit-out and security works. (10) Associated works. Note: The non-lethal, pulsed monitored electric fence is a deterrent to intrusion, fixed to internal leaf of each palisade fence with interim control system and warning signs every 10 metres or less and clear demarcation zone internally.

Planning a project near 260, Holly Road, Western Industrial Estate, Dublin 12?