Site planning risk brief

To retain development consisting of (1) retention permission for works carried out to existing single storey type dwelling from that previously granted under file Ref. 02/1574 and all ancillary site works, (2) retention permission for floor plan and elevation amendments, (3) retention permission for site layout amendments, (4) retention permission for domestic garage/store and (5) all ancillary works

For one & half storey extension to side of existing dwelling, alterations to existing floor plan and elevations, and all ancillary site works

To erect fully serviced single storey extension to side and rear of existing dwelling and all associated works

To erect fully serviced first floor extension to the side of existing dwelling and all associated works

(a) to retain minor alterations to floor plans and elevations of previously approved dwelling, (b) to retain the location of the existing entrance and driveway and (c) PERMISSION to revise the location of the proposed detached domestic garage and all associated works. Previous planning Reg. No. 16/551 refers

Minor technical amendments to the development permitted under Planning Reg No 16/494 to provide for (i) an increase in the permitted wind turbine rotor diameter from 60 metres to up to 70.5 metres; (ii) re-location of the permitted wind turbine by c. 4 metres to the south together with the re-location of associated ancillary infrastructure; and (iii) all associated site development works. There shall be no increase in the tip height of the permitted wind turbine which shall not exceed 91 metres. Significant further information and revised plans have been submitted.