Planning precedent report

PROTECTED STRUCTURE: Permission is sought for removal of a 3500mm wide section of granite plinth, railings and pedestrian gate to allow for a new vehicular entrance, provision of new sliding gate constructed using the existing railings and installation of charging point for an electric vehicle.

PROTECTED STRUCTURE:PERMISSION:The works will consist of the demolition of a chimney and portion of roof. The construction of a single-storey extension at ground floor level, a dormer-type extension at second floor level with solar panels to the roof of the dormer extension, the insertion of a new circular window at second floor level and the construction of a bicycle shed. All works are to be located to the rear of the property. No parking spaces or significant trees will be affected.

PROTECTED STRUCTURE: PERMISSION: Construction of a new single storey rear extension between the contemporary rear extension and the return of the main house, removal of non-original double doors and two windows to the rear courtyard allowing access to the proposed extension, drylining the external walls of the contemporary extension and the existing rear kitchen with Calsitherm, installation of a new roof light to the existing single storey lean-to roof at the rear, sealing up internal door to original kitchen and blocking up this opening, plumbing, electrical and decorative works to facilitate the development.

PROTECTED STRUCTURE: the development will consist of renovation, alteration, conservation and extension works to existing three storey semi-detached period property, to include: (1) demolition of existing non-original single storey extension (50m2) to side, and construction of a new replacement single storey extension (58m2) to the side with roof lights / roof-glazing, (2) alterations to existing external walls and door/window opes of ground floor rear return and installation of new glazed patio doors to east elevation and new projecting timber bay window to south elevation, (3) alterations / reconfiguration of existing layout and internal partitions to ground & 1st floor return rooms, (4) formation of new door openings in existing internal walls at ground, first & second floor, (5) internal insulation/ thermal upgrade works to selected existing external walls and existing suspended timber floor, (6) replacement of existing defective roof finishes to domed roof turret, (7) re-slating of pitched roof and general repairs and conservation works to roof, chimneys, fascia's & rainwater goods; (8) installation of photovoltaic (PV) solar panels to southern roof facade at rear, (9) facade conservation works including lime repointing and brickwork repairs, repair/replacement of existing external dash-render finishes and cleaning / conservation works to stonework, (10) upgrading and refurbishment works to existing timber casement windows, doors and external timberwork, (11) general refurbishment and conservation works to interior & exterior of existing period structure, (12) associated site works.

The development will consist of the conversion of the existing garage to habitable area, new window to replace the existing garage doors to the front of the house, new window to replace the existing door to the side of the house, internal layout reconfiguration at ground floor level, modification of the existing window ope to the side of the house and the careful removal of the redundant chimney to the rear of the house. Works to the boundary include the widening of the existing vehicular access and gates to the front of the property and all necessary ancillary site development works.

The development will consist of demolition and removal of an existing rear extension and conservatory, and existing outhouse/shed, construction of a new single story extension to the rear (west) of the dwelling serving a dining area, kitchen area and utility room with new rooflights over the dining and kitchen areas, alteration of the existing two storey extension to the side elevation (south), consisting of new W.C. and cloakroom at ground floor, extending the existing bedroom at first floor, with a new section of hipped roof proposed over, in lieu of the existing flat roof, with roof tiles to match existing main roof. Total additional floor area proposed, 64.4msq – 27.9msq at ground, 11.4msq at first and 25.1msq at attic level. Additional works include internal alterations, construction of attic storage and access, new rainwater goods, soffits and fascias to match existing, a new front door and side lights within the existing arched opening, and replacement of existing windows with new thermally efficient windows, and all associated site development works.