Planning precedent report

The proposed development will consist of the construction of an attic conversion along with a rear dormer and flat roof, 2 no. rooflights to the front and a covered area to the side at ground floor level with a lean to roof.

The extensions and alterations to existing dormer bungalow consisting of (i) a single storey extensions to rear kitchen living area (16.0m2). (ii) single storey extension to the rear bedroom (6.0m2). (iii) extend existing rear dormer to rear for ensuite upgrade and internal alterations.

Planning permission is sought for the widening of the vehicular access from 2.4M to 3.6M with, 1.6M high gate. A 26sqm single-storey extension to the rear. A two-storey extension to the side, to project over side passage at first-floor with hipped roof over. Conversion of the garage, with bay windows to front to ground and upper floors. Removal of the rear chimney. A 2sqm porch to the front. A 5sqm outbuilding to the rear garden

Demolition of single storey conservatory, shed, outhouses & chimney to rear, removal of first floor window to side and to build new single storey flat roof extension to rear, installation of ground floor shower room & utility, garage conversion to playroom with new bay window to front, together with extension of hipped roof over existing first floor to side, attic conversion to study / storage with 2 No. roof lights to rear and associated site works

Planning Permission for the construction of 1) a single storey extension to the front/ side/ rear, 2) internal alterations throughout the ground floor with the removal of one bay window to the rear to be replaced with a sliding door, and increasing the size of the remaining 2 bay windows to the rear, 3) internal alterations to the first floor level to combine 2 bedrooms into one master bedroom with alterations to the dormer window layout removing one window and re-cladding the dormer in zinc roof finishes, with all associated site works.

PERMISSION: For 1) The construction of a single storey extension to the side and rear, 2) to increase a section of the side boundary wall to 1.8 metres in height, 3) the demolition and removal of a chimney stack from the original roof structure, with all associated site works.