Planning precedent report

Construct a light industrial unit with a footprint of 2976 m2 plus associated roads, carpark, and service yard to the north and adjoining their existing facility. The proposed expansion shall house similar operations to the existing facility with the fabrication of modular service supplied systems. The Proposed Extension Shall match the existing in line and level. The General External treatment shall be a mix of Microrib and trapezoidal insulated cladding and shall incorporate extensive fenestration on the eastern and southern Elevation. The roof shall support solar panels over its full area. The application also seeks planning retention for an existing ancillary service yard and landscaped berms measuring 6540m2 located to the West and adjoining the original development.

Alter previously approved planning register number 22/495, granted on 29/09/2022. The alterations shall consist of the modification of the external treatments of the Southern and Western elevations through the installation of revised fenestration and the reduction in the level of the parapet from 120.750m to 117.750m. The Glazed Entrance at the South East corner shall be realigned and reduced in height in accordance with the general parapet level of the main building.

Construct a light industrial unit with a footprint of 3000 m2 and overall floor area of 4549m2, plus associated roads, carpark, and service yard. The ground floor of the unit shall consist of 2319m2 of industrial space containing warehousing and clean room and an adjoining manufacturing area complete with an overhead gantry crane. A three-storey administration block with in-house training facilities, measuring a total floor area of 2231m2 over 3 floors, shall be located on the Eastern elevation of the development with a Glazed Entrance tower located on the Southeast Corner incorporating Corporate Signage. General External treatment shall be a mix of Microrib and trapezoidal insulated cladding and shall incorporate extensive fenestration on the eastern and southern Elevation. The roof shall support solar panels over its full area. The security of the site shall be provided by the building itself and a 2.5m high palladium fence as per figure 8, which shall surround the rear of the site and terminate at the southwest and northeast corners of the building. Landscaping shall be developed along the southern and eastern boundaries along a 1.5m high berm adjacent to the local authority footpath, with an extensive landscaped mindfulness and wellbeing area created at the south-eastern corner around the proposed surface.

Construct a detached building t incorporate light industrial and office facilities, site boundary fencing and gates, car and bicycle parking facilities, landscaping, building and site and incidental works

(1.) Retain changes to the existing development previously granted permission under planning reference 20/271 including (A) An increase in the overall height of the building (B) An increase in the floor area of the building due to the construction of additional floor space at first floor level within the building and an increase in the overall building dimensions (C) The use of alternative wall finishes to the building (D) The alteration to external window and door sizes and locations, along with the provision of an additional window to the front elevation of the building (E) The relocation of the building on the site (F) The relocation of the site entrance (G) The alteration of external hardstand areas (2.) Permission for the construction of an external fire escape stairway, roof maintenance ladders and external fire escape doorway, and all alterations and associated site works

Carry out development which will consist of; (A) AN EXTENSION TO THE EXISTING LIGHT INDUSTRIAL BUILDING (B) TO CHANGE SITE BOUNDARIES FROM THAT PREVIOUSLY GRANTED UNDER PLANNING REFERENCE 20/271 (C) THE INSTALLATION OF APPROXIMATELY 400SQM OF SOLAR PHOTOVOLTAIC PANELS, AND ALL ALTERATIONS AND ASSOCIATED SITE WORKS