Applications tied to the site
Partial coverage1 register record is within the point-match tolerance; a parcel boundary is needed to treat this as exact.
1 matchedSite planning risk brief
One-off house / within 5 km where a location match is available
Executive snapshot
13% of nearby decided applications were refused. The site check found 608 decisions within 5 km, 1 exact-site or onsite candidate record, and 47 structured appeals.
Evidence maturity
Each section reports its own coverage. “Not yet covered” means no conclusion is drawn while source datasets or policy extraction are still being loaded.
1 register record is within the point-match tolerance; a parcel boundary is needed to treat this as exact.
1 matchedCurrent indexed zoning and settlement layers are intersected with the selected site where coverage exists.
Current section-and-page citations have not yet been loaded for this authority.
Each layer reports its own coverage; missing coverage never appears as a clean result.
0 prompts are backed by extracted nearby decision evidence; all prompts remain checks, not predictions.
47 structured nearby appeal records.
47 matchedHistoric extracted references are not presented as current policy; verified citations are still being loaded.
Open preview
Open preview
Extensions to and modifications of the existing planning permission Ref RA170887. The development consists of the construction of a proposed Biopharmaceutical Manufacturing and Research Facility as described hereunder. 1) A single storey with mezzanine Biopharmaceutical Manufacturing and Research Facility sized approximately 17,500 square metres and approximately 14.5 metres high, located to the north of the existing manufacturing building including docks and yard-based plant and equipment and roof mounted stacks, equipment and vents and including 2no. boiler stacks approximately 27 metres high. 2) A single storey, partially glazed pedestrian link approximately 4 metres high. 3) A three-storey canteen and laboratory extension located to the south of the existing laboratory, administration and canteen block sized 1,020 square metres approximately and 21 metres high, including roof mounted plant and equipment. 4) The relocation of 2no. single storey modular liquid supply and waste stores to the east of the existing warehouse, both sized approximately 30 square metres and approximately 3 metres high. 5) The demolition of the existing single storey waste store located in the utilities to the north east of the existing faciility, sized approximately 235 square metres and approximately 4.7 metres high and the construction of a new waste store to the south of the proposed facility, sized approximately 235 square metres and approximately 4.7 metres high 6) An extension to the west side of the existing single storey ESB substation located adjacent to the southern site vehicular entrance gates, sized approximately 35 square metres and approximately 4.5 metres high. 7) The addition of 162 permanent car parking spaces, bringing the site to a total of 524 permanent car parking spaces and a dedicated shuttle bus parking area and shelter and including 8 disabled car parking spaces and including 16 electric vehicle charging spaces and including 36 cycle parking spaces, including the re-use of approximately 460 existing temporary construction related car parking spaces. 8) A landscaped berm approximately 8 metres high located to the rear (east) of the existing manufacturing site. 9) An additional utilities yard, housing plant and equipment, located to the south west of the proposed facility. 10) Alterations and extensions to existing roads and site works. These works include the use of existing temporary construction facilities and the extension of these temporary
A) Extension of existing Waste Water Neutralisation Plant to allow for increased capacity of waste water. This will include construction of bunded area to allow for installation of new tanks, including 3no treatment tanks all approximately 11.23 metres high and ranging in diameter from approximately 3.42 metres to approximately 8.54 metres, 1no stack approximately 5 metres high and approximately 0.6 metres in diameter and also including 1no electrical building sized approximately 20 square metres and approximately 4.6 metres high and items of plant and equipment, all located to the south of existing facility. b) Permission for change of use of temporary construction storage building to permanent waste recycling building, sized approximately 240 square metres and approximately 7 metres high. c) The works also include modifications to internal roads, new pipe bridge, site lighting and all associated works including temporary construction laydown area associated with the proposed development. This application consists of development on landholding for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act, 2003) is required.
The development will consist of the continued use of two existing temporary office buildings and their associated amenities, which comprise of: (1) A temporary office building [1,772.6 sq.m. GFA and 7.05m in height] consisting of welfare facilities (including a gymnasium, studio, WCs, changing room / lockers, and shower facilities), canteen / kitchen, meeting rooms / office space, an IT room, document control room, electrical room, plant room, and circulation areas and stairwells. (2) A temporary office building [3,326.2sq.m. GFA and 10.6m in height] consisting of open plan office space, meeting rooms, canteen / kitchen, an IT room, document control room, electrical room, welfare facilities (including WCs and a changing room / lockers), and circulation areas and stairwells. (3) 460 no. of car parking spaces. (4) 14 no. cycle parking spaces. (5) All associated hard and soft landscaping and site services
A new extension (max 8m high with a gross floor area of 430m2) to the northern and eastern elevations of an existing factory building (previously permitted under Reg Ref 84/115) used for the manufacture of concrete products and all ancillary works
Development will consist of a Factory Building (maximum height 10.8m with Gross Floor Area of 3,840 square metres) used for the manufacture of concrete products, 3 No. Cement Silos (maximum height 13.5m), 8 No. covered Aggregate Storage Bays split into two structures (maximum height 7m each) with associated ancillary infrastructure comprising a paved Product Storage Area and Perimeter Screening Mound (approximately 6m high). The overall planning application area is 2.6 hectares (Screening for Appropriate Assessment submitted)
Construction of a new two storey office building and extension of existing Kilsaran Concrete showroom and office building to create new corporate headquarters. Total construction providing c. 2,618 sq.m of office accommodation with a new building entrance accessed from landscaped carpark, 43no. additional carpark spaces and 20no. bicycle spaces with associated changing/shower rooms. Total gross floor area c.3,152 sq.m. Construction of standalone single storey showroom building to include display space, 2no. offices, WC and staff facilities, 19no. dedicated car parking spaces and 2no. bicycle spaces. Total gross floor area c. 190 sq.m All ancillary service plant and storage areas. All associated site development, landscaping, boundary treatment works, and infrastructural services provision
The brief summarizes the pattern across all 608 matched decisions within 5 km and includes up to 80 detailed comparables (40 nearest refusals and 40 nearest grants), with extracted reasons, quotes, and available source links. €29 incl. VAT.
Source match
Matched from public planning record 21677The site brief adds up to 80 nearest detailed grants and refusals, extracted source evidence, document links, and a shareable risk summary.
Included in site brief
Included in site brief
Included in site brief
Included in site brief