Site planning risk brief

(1) A single storey Material Recovery and Transfer Facility building (floor area 1414m2). (2) A single storey detached prefabricated Office building (floor area 67m2). (3) The vehicular access to the site is via the as constructed 2no. entrances. (4) A service yard with vehicle weighbridge and vehicle washing area within. (5) On-site staff car parking and bicycle parking. (6) 1.8m high boundary wall and fencing to front and side boundaries. (7) 2.4m high boundary fencing to side and rear boundaries. (8) Signage on the building. (9) Connection to all services, and (10) All necessary ancillary site development works to facilitate this development. The application relates to an activity requiring a Waste Facility Permit from Meath CC. The waste tonnage for acceptance and handling at the facility will not exceed 24,500 tonnes per annum. The operating hours of the facility will be 07.00-18.00 Monday to Friday and 08.00-16.00 Saturday, and closed on Sundays and Bank Holidays

An increase in waste tonnage at the material recovery and transfer facility permitted under Reg. Ref TA/190687 to now accept up to 50,000 tonnes of waste per annum for the reception, processing and temporary storage of C&D waste, commercial waste and mixed municipal waste for onward transfer. There are no works proposed as part of this application. Permission is also sought to amend Condition No. 2 of Reg. Ref. TA/190687 to now permit a maximum of 50,000 tonnes to be accepted on site per annum. An Environmental Impact Assessment Report (EIAR) has been prepared in respect of the proposed development. The proposed activity will require a review application of the existing Waste Facility Permit from Meath County Council to reflect the increase in waste tonnage upon receipt of planning permission

The development will consist of 3 No Warehouse Units in a single building with Bin Store, form entrance to access road leading to public road. Connect to all services with associated site development works & carparking

The development will consist of: (1) A steel fabrication building incorporating a mezzanine floor for staff facilities and parts storage (2) a detached product assembly building (3) HGV entrance and car entrance (4) services yard to include pallet storage racks and vehicle wash-down area (5) staff parking and bicycle shelter (6) 2.4m high paladin fencing to front, rear and sides of site (7) signage on buildings 1 and 2 (8) underground surface water attenuation yank, connection to all services on site together with all associated site works

The development will consist of completion of the retail/industrial building, to include showrooms/administration and amenity areas together with manufacturing and storage facilities, previously approved under planning register reference number TA/70729 and extended under planning register reference number TA/13160, together with all ancillary site works. Significant further information/revised plans submitted on this application

The development being retained consists of (a) removal of access stairs from shop to first floor and close off stairwell (b) modifications to existing office and shop floor layout at ground floor together with re-location of trade counter (c) change of use of part section of warehouse area to office accommodation as back up for new trade counter (d) removal of men's toilet at first floor level to form new office area (e) training room for staff at first floor level