Site planning risk brief

The proposed construction of a two storey dwelling house, detached garage, entrance, boundary fence/wall, suitable sewerage system with polishing filter and percolation area and all ancillary site works

End of waste activities within the footprint of the existing quarry, where some activities include; 1) Acceptance, processing and recovery of in-coming inert waste material arising from construction and demolition activity, comprising concrete, bricks, soil or other such similar material, to become a certified product for reuse in construction related industries 2) The maximum annual intake of incoming waste material shall not exceed of 24,500 tonnes; 3) The processing will include standard crushing and screening using the existing quarry plant; The site infrastructure for the proposed End of Waste activities will be limited to bays comprising storage and processing; 4) All ancillary site development works. The proposed development seeking planning permission will require a 'Waste Facility Permit' for the acceptance and processing of the in-coming waste, which will be sought through a separate application to Longford County Council. The proposed development seeking planning permission will require registration with Environmental Protection Agency for End of Waste recovery under the National End of-Waste Decision EoWN00l/2023 criteria

The continuance of (i) extraction of aggregates on an area of 1.431 hectares; (ii) processing/loading of aggregates on an area of 0.233 hectares; (iii) manufacture of ready-mix concrete in existing plant (176m2); (iv) importation and storage of sand for use in concrete manufacturing (0.008 hectares); (v) use of existing weighbridge and wheel wash (154m2)and (vi) existing site entrance and access areas (0.956 hectares), all within 2.661 hectares of the site development authorised under Pl08/529 and all ancillary works

To (a) construct a single storey extension to rear & south side of existing dwelling & also extension to the north side, to contain a granny flat (b) make internal alterations, (c) demolish existing garage/store to rear & construct a replacement, (d) decommission / sterilize existing septic tank & install a new proprietary wastewater treatment system and all associated site development works

The development consists of a total area of 18.6 hectares and comprises of the following: (1) Extraction of rock by blasting means down to a level of 20mOD from an area of approximately 14.2 hectares. (2) Erection of a concrete batching plant, processing plant, block yard, storage sheds, workshop, office buildings, weighbridge, wheelwash, settlement lagoon and all other associated ancillary facilities at the proposed manufacturing area of approximately 2.1 hectares. (3) Landscaping consisting of planted berms surround (1.6 hectares). (4) Entrance and access road from the public road to the manufacturing area (0.7 hectares). (5) Landscaping and restoration of the site on completion of extraction. The planning permission is for a 25 year period. The planning application is accompanied by an Environmental Impact Assessment Report (EIAR) and a Natura Impact Statement (NIS)

The proposed construction of a two storey type dwelling house, detached garage, entrance, boundary fence/wall, suitable onsite treatment system with polishing filter and all ancillary site works