Planning precedent report

2 two storey extensions to side of existing building (similar to lapsed planning SD17A/0067) and a canopy to front of existing building.

Hay shed building (2,100sq.m, 9.85m high); ancillary yard (approx. 1,584sq.m) for equestrian/agricultural related vehicle parking and marshalling with access and egress formed from within the existing equestrian farmyard; landscaping, fencing, associated earthworks and surface water disposal to an on-site soakaway.

Retention of 9 signs on the face of the above industrial unit building, 3 signs on the front elevation, 4 on the back and 2 on the side elevation facing east. Areas of each sign as listed (1) 16.8sq.m, (2&3) 3.15sq.m, (4) 15.9sq.m, (5) 8.55sq.m, (6&7) 9.2sq.m, (8&9) 51.6sq.m.

Retention of a 50sq.m extension 9.35m high to the service area at the front of the building and to extend same by 18sq.m; 131sq.m extension 9.35m high adjacent to the existing extension; retention of 4 service doors - 3 to the rear elevation and 1 to the front elevation. Retention of 1 escape door in the rear elevation; inclusion of 3 disabled parking spaces adjacent to entrance, to remove approx. 200sq.m of grassed area to provide additional van parking to the front of the building and retention of staff car parking to the rear.

Construction of a single storey, three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance, hard & soft landscaping; boundary treatments; all associated site development works above and below ground.

Construction of a single storey three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance; hard and soft landscaping; boundary treatments and all associated site development works above and below ground.