Planning precedent report

A first floor front and side extension with hipped roof over for extended living accommodation; change in roof profile from half hipped roof to full hipped roof to side and front of house; conversion of garage to living accommodation; alterations to front door with canopy over; a single storey extension to the rear with flat roof over; a dormer window to the rear roof profile; a converted attic space to extend accommodation; a widened front main road access.

2 storey extension to front of dwelling (floor area 3.44sq.m); alterations to existing ground floor front bay window; conversion of garage together with part single storey and part two storey extension to side and rear of existing dwelling (floor area 148.9sq.m); widening & setting back of the existing vehicular entrance gates & alterations to front boundary walls; associated site works.

Construction of first floor extension with roof lights over existing flat roof annex to front of dwelling; 2 new bay windows and front door at ground floor level to front with new lean-to roof over; new window to side of dwelling at first floor; change of existing brick finish to knapp plaster finish with new external insulation to entire dwelling; new solar panels to rear roof slope and all associated site works.

1. Construct an Attic Conversion that involves replacing the existing pitched roof and raising the height of the pitched roof ridge by 1.5m. 2. Construct a storey & 1/2 extension to the front, over the existing Gird. Floor construction. This will also have a pitched roof, with the ridge at the same height as the new pitched roof. 3. Construct a 4.4m long (int. dimension) dormer window to the rear roof slope. 4. Construct a 1.6m long (int. dimension) dormer window to the front roof slope. 5. The installation of a new window to the gable wall. This window will serve the stairs; it will have translucent glazing and is to be located at Attic Floor level.

1. Construct an Attic Conversion that involves replacing the existing pitched roof and raising the height of the pitched roof ridge by 1.5m. 2. Construct a storey & 1/2 extension to the front, over the existing Grd. Floor construction. This will also have a pitched roof, with the ridge at the same height as the new pitched roof. 3. Construct a 4.4m long (int. dimension) dormer window to the rear roof slope. 4. Construct a 1.6m long (int. dimension) dormer window to the front roof slope. 5. The installation of a new window to the gable wall. This window will serve the stairs; it will have translucent glazing and is to be located at Attic Floor level.

Single storey extension to the rear of existing house.