Two storey two bedroom semi-detached house; Demolition of side rear extension to existing house.

(A) Construction of a one and a half storey and part single storey type house, (B) Garage/store for domestic use with 2 no stables and tackroom, (C) The installation of an Oakstown BAF wastewater treatment plant with percolation area and (D) New vehicular entrance and driveway off the shared access laneway and all associated site works

Change of use of part ground floor of existing office / warehouse premises to a Deli-Cafe (Delicatessen - Cafe) to include a new recessed shopfront, signage and associated alterations and modifications.

The development will consist of erection of back-lit signage to the west elevation of Unit 3018.

Alteration to previously granted planning permission (Reg. SD19A/0407, SD21A/0200 & SD22A/0092) for development at Site C (2.7ha site).

Amendments principally comprising of an overall increase in the commercial floor area by 15,479sq.m from the permitted 13,959sq.m to 29,438sq.m; the permitted scheme has 3 internal ancillary office floor levels, and the proposed alterations provide 2 mezzanine levels in the warehouse area (i.e a total of 5 internal floor levels); the permitted maximum height of the development at 23.7 metres will remain unchanged; the additional 15,479sq.m development proposed will comprise an increase in the warehouse floor area from 12,369sq.m to 13,353sq.m, staff facilities from 548sq.m to 2,582sq.m and ancillary office area from 1,042sq.m to 2,437sq.m; in addition to the provision of a 2 storey mezzanine warehouse area (9,703sq.m), integrated plant room (434sq.m) and plant area on 2 floors (929sq.m); construction of a 2 storey car-parking area (4,057sq.m and 7.8m height) to accommodate an increase from the previously permitted 119 ancillary car parking spaces to 190 car parking spaces; 13 designated van parking spaces (no dedicated van spaces previously proposed); 72 permitted cycle parking spaces; reconfiguration of the HGV yard and an increase in the number of HGV dock levellers from 12 to 14 and the provision of 16 van loading level entry doors; the provision of an additional egress on the eastern boundary to facilitate vans exiting the site; sprinkler tank and associated underground pumps; repositioned ESB substation (15sq.m and 3m height); bin storage (42sq.m and 2.9m height); amended lighting layout; signage; modifications to hard and soft landscaping and boundary treatments; and associated site development works above and below ground.

Modifications to a permitted warehouse development (as granted under SD19A/0407, as amended by SD21A/0200); The amendments principally comprise an overall increase in the commercial floor area of the warehouse by 2,334sq.m from the permitted 27,683sq.m to 30,017sq.m; The modifications proposed include: an increase in plant/machinery areas from 1,363sq.m to 3,933sq.m (principally through the provision of an additional mezzanine level within the warehouse area to accommodate plant/machinery); a reduction in the permitted mezzanine level 2 from 9,703sq.m to 9,349sq.m (principally through the provision of opes in the mezzanine floor to accommodate machinery associated with an advanced picking system); an increase in warehouse floor area from 14,225sq.m to 14,282 sq.m; an increase in staff facilities from 1,616sq.m to 1,659sq.m; and an increase in ancillary office area from 776sq.m to 794sq.m; The development will also include: the provision of security hut (14.7sq.m) close to the southern site boundary; the relocation of the building's main entrance stair core at the western elevation; elevational changes including the repositioning of 2 level entry doors and 1 dock leveller and the associated canopy, repositioning of fire escape doors, removal of 2 M&E rooms; internal modifications including the insertion of a warehouse toilet block at ground floor level, repositioning of stair cores; the provision of a pedestrian gate adjacent to the bin store; reduction in bin area from previously approved 45sq.m to 38sq.m; provision of compactor in place of 1 van parking space along the south-east boundary resulting in the reduction of van parking spaces from 12 to 11 in a modified arrangement; relocation of van egress gate further south; modifications to the position of the van loading entry doors and associated canopy; modifications to hard and soft landscaping and boundary treatments including the provision of a paladin fence separating the car parking area and the HGV circulation area and removal of 2 green walls; and all associated site works above and below ground.

Provision of a warehouse unit with ancillary three storey office and staff facilities and associated development; the building will have a maximum height of 23.7m with a gross floor area of 13,959sq.m including a warehouse area (12,369sq.m); staff facilities (548sq.m) and ancillary office area (1,042sq.m); provision of one new vehicular access/egress point at the northern corner of the subject site and one HGV access/egress point at the southern corner of the subject site which connects onto the internal access road for two adjacent permitted warehouses (Reg. Ref. SD18A/0265) and permitted waste metal facility (Reg. Ref. SD19A/0065) which links to the Greenogue Roundabout on the R120; 119 ancillary car parking spaces; bicycle parking; HGV yard with 12 loading bays; level access goods doors; dock levellers; hard and soft landscaping; ESB substation (9sq.m); boundary treatments and associated site development works above and below ground.

Alterations to existing east and west elevations to include 10 external vents; installation of new photovoltaic solar panels to existing roof; provision of 10 bicycle parking spaces; 2 EV chargers; 1 external condenser and all associated site works.

Installation of roof-mounted solar photovoltaic panels on the roofs of two existing buildings including all ancillary works and services.

Erect 3 company logo advertising signages, (Units 1 & 2 currently under construction as per previously granted planning permissions reg. ref. SD21A/0162 & SD22A/0313); The signage will consist of Signage No. 1 & No. 2, company logo; non illuminated; area of 56sq.m each, located 12.31m above ground floor level at the front (eastern) elevation and side (southern) elevation; Signage No. 3, non-illuminated powder coated aluminium totem 1.2m wide x 3.1m height x 0.1m deep, located to the eastern side of the ancillary car park entrance; On lands bounded to the south by the N7 Naas Road, to the north and west by the National Distribution Centre and to the east by Brownsbarn Drive and the Royal Garter Stables, a Protected Structure (RPS Ref.261).

The installation of an external Air Handling Unit, to be housed in a new timber and metal clad enclosure adjacent to Unit 3030, Lake Drive and the installation of a Heat Pump Unit to be installed within an existing plant enclosure, with additional cladding proposed, in the north east corner of the carpark of Unit 3030 and all ancillary engineering and landscape works necessary to facilitate the development at Unit 3030 Lake Drive, Browns barn, Dublin 24 D24 KX6Y. (Previous planning reference SD25A/0185W )

The development will consist of alterations to the existing east elevation to include the provision of a new external fire escape stairs to facilitate the internal subdivision of the existing office building, together with all associated site and ancillary works.

Retention permission for installation of 2 no. illuminated signs to the existing building. These signs consist of the installation of 1no. sign to the front (west) elevation and 1no. sign to the (north) elevation and all associated site works.

As constructed dwelling and garage

Relocation of percolation area granted under planning ref: 21/1287 and revised boundaries

The development will consist of: I. 384 residential units with a cumulative gross floor area of 33,190.15 sq.m comprising: a) 122. houses, consisting of 28 two-bed units, 83 three-bed units and 11 four-bed units, ranging in height from 2-3 storeys. b) 84 duplex units, consisting of 48 one-bedroom units and 36 three-bedroom units, ranging in height from 2-3 storeys. c) 178 apartments consisting of 43 one bedroom units and 135 two-bedroom units, ranging in height from 5-7 storeys. II. tenant amenity floorspace with a gross floor area of 139 sq.m. III. 1.49 ha of public open space including a public plaza and 0.15 ha of communal amenity space; IV. the provision of a childcare facility with a gross floor area of 239 sq.m and associated play area; V. the provision of 361 car parking spaces, including 10 disabled parking spaces and 16 reserved for visitor parking and 3 reserved for creche staff. VI. the provision of 734 bicycle parking spaces, including 472 residents bicycle parking spaces and 262 visitor cycle spaces. VII. vehicular access is proposed via 3 access points including the existing Kingswood roundabout on Citywest Avenue to the north, The Walk to the west and from the park and ride access road at the eastern end of the site. Dedicated pedestrian/cyclist links are proposed throughout the site. VIII. ESB substation, 3 x ESB kiosks, rooftop solar photovoltaics, landscaping and all ancillary site and development works.

Erect 8 No. Company logo advertising signs at the Block A Jordanstown Road, Greenogue Business Park, Greenogue, Rathcoole, Co Dublin. The signage will consist of the following: Sign No 1: Area 5.60m2 at 13.80m above ground level Sign No 2 Area 5.60ms at 13.60m above ground level to the front (north-east) elevation Sign No 3 Area 5.60m2 at 13.52m above ground level to the side (north-west) elevation Sign No 4 Area 5.60m2 at 13.35m above ground level to the rear (south west) elevation Sign No 5 Area 0.175m2 by the entrance door on the front (north-east) elevation Signs No 6 & 7: Area 0.175m2 each) on the main entrance door Sign No 8 Fence sign Area 0.90m2 by the gates at the north-western site boundary

Subdivision of existing Block A (existing areas; 14,267sq.m warehouse and 1019sq.m ancillary office/staff facilities as granted permission under Reg. SD19A/0265 into 2 warehouse units. Unit A1: 6600sq.m existing warehouse, 684sq.m existing ancillary office/staff facilities; Unit A2: 7474sq.m existing warehouse, 335sq.m existing ancillary office/staff facilities; 133sq.m change of use of existing warehouse to ancillary office/staff facilities and 174sq.m additional first floor ancillary office/staff facilities;; minor elevation adjustments to north & west elevation of Unit A2 to facilitate the additional ancillary office/staff facilities; minor alterations to existing ancillary staff facilities to facilitate the subdivision; subdivision of the rear HGV yard by internal fencing; provision of new HGV access gate to Unit A1 from the existing estate access road.

Alterations to previously granted planning alterations application, Reg. Ref. SD21A/0083, at Block A, College Lane, Greenogue, Rathcoole, Co. Dublin. The subject alterations refer to subdivided Unit A2 only consists of omission of a previously proposed addition to existing staff facilities block A3, which is no longer required as part of the development. The results in change of use 133sq.m ancillary office/staff facilities area on the first floor. All other details remain as per the granted application reg ref SD21A/0083.

4 No. building mounted company logo advertising signs or existing warehouse office unit comprised of: Sign No 1: 6.84m2 at 12.87m above ground to the side (South east) elevation; Sign No 2: 6.84m2 at 12.50m above ground to the front (North east) elevation; Sign No 3: 1.99m2 at 11.03m above ground to the side(South east) elevation: Sign No 4: 1.99m2 at 10.70m above ground to the front(North east) elevation and all ancillary site works.

Subdivision of existing Block A (existing areas; 14,267sq.m warehouse and 1019sq.m ancillary office/staff facilities as granted permission under Reg. SD19A/0265 into 2 warehouse units. Unit A1: 9169sq.m existing warehouse, 684sq.m existing ancillary office/staff facilities block A1 & 286sq.m existing ancillary office/staff facilities block A2; Unit A2: 4965sq.m existing warehouse & 356sq.m proposed ancillary office/staff facilities block A3 (consisting of 49sq.m existing toilet block, 133sq.m, change of use of existing warehouse to ancillary office/staff facilities on ground floor & 174sq.m additional first floor ancillary office/staff facilities; minor elevation adjustments to north & west elevation of Unit A2 to facilitate the additional ancillary office/staff facilities; subdivision of the rear HGV yard by internal fencing; provision of new HGV access gate to Unit A1 from the existing estate access road.

Single storey extension to the rear of home

Installation of two internally illuminated external building mounted signs to the existing west and east facades.

Installation of a new access door and canopy to the south east elevation at ground floor level, the replacement of 4 spandrel panels with louvred vents below first floor level slab, and a new air handling unit with louvred enclosure and access doors at roof level.

Extensions to front of existing warehouse to include single storey infill enclosure over existing loading bay ramp (floor area to be 44.12sq.m with height to top of parapet of 6.2m above ground level); new single storey goods-in inspection store (floor area to be 55.98sq.m with a height to top of parapet of 4.8m above ground level); both structures complete with roller shutter access door & personnel door within the front/south elevation, together with site works.

Installation of energy storage units at an existing datacentre facility. The energy storage will consist of two new battery storage units, 2 new HV power skids (PCS transformer and HV RMU), two new MV transformers, concrete slab, security fence of 2.4 meters height including two new internal gate entrances.

The installation of an energy storage unit at an existing data centre facility. The development involves the placement of three ISO 40ft. shipping containers containing back up storage units at Keppel Data Centre, Citywest Avenue, Citywest Business Park, Dublin 24

1 x 50 KWp solar photovoltaic (PV) system on main office building. There will be a total of 156 PV panels on the main office roof and will occupy an area of 257sq.m.

1 ESB Substation and MV Switch room to serve warehouse development Block A; ESB substation and MV Switch room have a total internal floor area of 28sq.m and are 3.6m high; Block A development, currently under construction, was originally granted under South Dublin County Council planning permission Reg. Ref SD18A/0265 and SD21A/0082.

Two storey end of terrace house to side of existing house with new vehicular access and all associated site works.

Change of use of an existing single storey detached store (floor space - 154sq.m) to a research and development gas innovation workshop and store.

Alterations to existing granted planning, Ref. SD19A/0065, for a proposed Waste Metal Transfer Facility including Waste Electric & Electronic Equipment (WEEE). The subject alterations for which planning permission is sought for are as follows: (1) Reconfiguration of the floor plan areas as follows: (A) Provision of 535sq.m additional floor area due to introduction of areas as follows - (A.1) Extended display area at ground floor of ancillary office, addition of 46sq.m floor area, (A.2) Extended open plan office at first floor of ancillary office, addition of 20sq.m floor area, (A.3) Single storey ancillary storage facility to the front north-east elevation totalling 166sq.m with overall height 7m, (A.4) Mezzanine area to the south eastern side of Light Industrial Unit, totalling 303sq.m. Alterations listed above result in total building area Increase from 4391sq.m to 4926sq.m as shown at the revised table of gross Internal floor areas & uses. (B) Change of use of 64sq.m of light industrial unit floor area to staff facilities due to the introduction of: (B.1) Enclosed stairs from Light Industrial Unit to ancillary office/staff facilities (overall 31sq.m), (B.2) single storey cleaners store and storage at ground floor to the north-eastern comer of light industrial unit (overall 33sq.m). (C) Change of use of 100sq.m of workshop charging area & staff facilities to workshop area & single storey office/staff facilities. (D) Introduction of full height dividing wall at light industrial unit. 2. Elevations alterations as per list above plus additional alterations as follows: (a) Provision of full height cladding (ground floor to roof) to light industrial unit and ancillary Workshop. (b) Introduction of 11m wide x 6m high open to light industrial unit side (north-western) elevation, (c) Rearrangement of all fire exit & level access doors to light industrial unit & ancillary workshop including omission and addition of the same, (d) Introduction of integrated modular louvre system to light industrial unit rear (south­western) & side (north-western) elevation, (e) Introduction of canopies to the ancillary office main entrance and above 11m wide open & dock levellers to light industrial unit side (north-western) elevation. (3) Site plan alterations as follows: (a) Rearrangement of car parking spaces due to provision of office extended display area to the front (north-eastern) elevation, (b) Provision of new finish floor level to office/staff facilities and Workshop and associated site levels adjustments, (c) Provision of a new boundary fence type (paladin fence) throughout the development, (d) Provision of additional weighbridge - overall 2 proposed and rearrangement of brush wash and steam wash between workshop and site's north-western boundary, (e) Provision of building protection bollards to workshop side elevations (south-east and north­west), (f) Associated drainage adjustments due to the inclusion of the alterations above plus reduction of surface water and foul sewer outfall route as per as built access road and services which serve built developments to the east of the site. All other details such as landscaping, lighting, external surface finishes, Environmental Impact Assessment Report (EIAR), Flood Risk Assessment etc. will remain as per the granted application ref. SD19A/0065.

Proposed 205sq.m of ancillary office & 242sq.m of ancillary staff facilities extension at the second floor level to the existing ancillary office located to the north-western elevations side of existing warehouse; Building elevations remain as existing due to second floor glazing being provided in previously granted planning permissions; Addition of 4 covered cycle parking to the existing covered cycle parking to facilitate the additional office / staff facilities area.

Alterations to an existing granted planning application, Reg. Ref. SD20A/0204, for a warehousing development consisting of provision of a new separate ancillary workshop building to the site's western corner measuring 278sq.m, overall height 9.7m; provision of new extended glazed entrance of ancillary office at ground floor (28sq.m, 5.9m high) to the front north-western elevation and new emergency exit route at first floor (43sq.m) exiting to side north-eastern elevation by new external stairs. Additional floor area provided 71sq.m; the alterations above result in total floor area increase by 349sq.m (from 2,222sq.m to 2,571sq.m); provision of 3 internally lit building mounted business logo signs, 12.25sq.m each (12.7m above ground level) to the front (north-western), side (north-eastern) and rear (south-eastern) elevations; provision of 3 10m high flagpoles to the north of the site, with a distance of approx. 31m from the warehouse and new extended office entrance; provision of 288sq.m solar panels to the roof of the warehouse; provision of a new recessed access/egress, rearrangement of truck wash area and refuel area and partial revision of the north-western site's boundary fence type C; elevation and site plan revisions associated with entrance porch, signage and fire exit stairs; and associated drainage adjustments due to the inclusion of the above alterations; all other details will remain as per the granted application Reg. Ref. SD20A/0204.

Provision of a warehouse unit with ancillary office and staff facilities and associated development. The building will have a maximum height of 15.8m with a gross floor area of 2,222sq.m including a warehouse area (1,530sq.m), staff facilities (302sq.m) and ancillary office area (390sq.m) and will also include the provision of 1 new vehicular access/egress point along the north-west boundary of the subject site onto Clonlara Road; pedestrian access; 22 ancillary car parking spaces; bicycle parking; HGV marshalling yard with 2 loading bays; level access goods doors; dock levellers; access gate; signage; hard and soft landscaping; lighting; boundary treatments and associated site development works above and below ground.

Relocation and resizing of previously granted ancillary workshop within the facility towards the south-east, now measuring 186sq.m overall height 7.2m (Previously granted at 300sq.m and 9.7m high); Relocation of pedestrian entrance gate by 9m on the northern site boundary due to design change to accommodate site levels and access gradients; Relocated HGV wash area adjacent to repositioned workshop building and associated drainage adjustments due to relocating the workshop and HGV wash bay; 1m high gabion retaining walls to the site's southern boundary (rear) to facilitate level differences between the subject site and the neighbouring site; Provision of an on-site Well Pumphouse (4.8sq.m and 2.7m high); Provision of associated above ground Water Tank (10m x 3m x 3m, 90m3); The overall site area remains as per the previous application at 0.98ha and there is no alteration to site landscaping.

Single storey extension to the side and rear along with a replacement roof and attic conversion and all associated site works

Retention/change of use for existing development and shed/outbuilding; the development was originally built for residential purposes but is currently being used as a childcare facility.

Single storey extension to the side and rear along with a replacement roof and attic conversion along with the upgrading of the existing sand polishing filter and all associated site works

Development at a site of 1.65ha comprising of the erection of secure anti-climb wire-mesh fencing around the perimeter of the existing building at a height of 2.1m, with associated landscaping works to screen the fencing. The provision of electronic vehicular access gates off the internal access road for access to rear service compound and car parking, vehicular barriers, and internal access footpaths, in addition to all associated site development works.

Erection of secure fencing and gates to the perimeter of the site, including all associated site development works, landscaping and planting.

Construction of three 3 storey office buildings, with a total floor area of approx. 16,732sq.m. The proposed development also provides for plant rooms at roof level, all associated site development works, landscaping, café (57sq.m), bicycle parking, car parking at surface level, basement level & a two level podium car park in the north-east corner of the site incorporating shower & changing facilities (152sq.m), ESB substations & service plant, and bin storage, all on a site area of 3.74ha. The effect of the proposed development will be a modification to part of an extant permission under Reg.Ref. SD06A/0737 & SD06A/0737/EP. The proposed development also provides for 2 vehicular access points off Kingswood Road ( Old Naas Road) and 2 vehicular access points of Kingswood Avenue.

Provision of a warehouse with ancillary office and staff facilities and associated development; The warehouse will have a maximum height of 13.776 metres with a gross floor area of 1,526sq.m including a warehouse area (1,391sq.m), ancillary staff facilities (113sq.m) and ancillary office area (22sq.m); A vehicular entrance/exit via Brownsbarn Drive; a pedestrian access via Brownsbarn Drive; 7 ancillary car parking spaces; bicycle parking; level access goods doors; hard and soft landscaping; lighting; boundary treatments; plant; and all associated site development works above and below ground on lands generally bounded to the north by Browns barn Drive, to the south by a ramp to the Naas Road (N7)1 to the east by a Car Sales Showroom and to the west by a Petrol Filling Station.

Change of house design and minor adjustment to house location in relation to approved planning application ref no. 161275

Planning Permission for Alterations to amend the previous granted permission (Reg Ref SD23A/0178) for a Self-Storage Facility revised to provide an open hard surfaced yard to be used for the parking of vehicles and trailers and external storage of non-hazardous goods with all associated works and Ancillary WC Facility at Tay Lane, Greenogue, Rathcoole, Co. Dublin. The subject alterations for which Planning Permission is sought are as follows: 1. Permitted Self-Storage Facility omitted to provide an open hard surfaced yard 2,468m2 to be used for the parking of vehicles and trailers and external storage of non-hazardous goods; 2. Provide a single storey Ancillary WC Facility, 27m2, 4.2m high, to the North-East boundary of the site. 3. Omission of 6 no. car parking spaces to the side (north-western) elevation; 4. Adjusted HGV site entrance set back to accommodate a recessed HGV Access/egress; 5. Provision of 9m wide HGV sliding gate; 6. Associated landscape adjustment due to the inclusion of the alterations above; 7. Associated drainage adjustments due to the inclusion of the alterations above.

Construction of a Self-Storage building with ancillary facilities and associated development. The Self-Storage building will have a maximum height of 9.745 metres with a Gross Floor Area of 1,796 sq m including storage area (1,698 sq m) and ancillary facilities (98 sq m). The development will also include: a vehicular entrance/exit to the site via Tay Lane; 6 No. ancillary car parking spaces (including 1 No. accessible parking space); loading bays; external fire escape stairs; an external canopy; boundary treatments; hard and soft landscaping; lighting; and all associated site and development works above and below ground.

Provision of a warehouse with ancillary office and staff facilities and associated development. The warehouse will have a maximum height of 15.6 metres with a gross floor area of 4,136 sq. m including a warehouse area (3,713 sq. m) ancillary staff facilities (220 sq. m) and ancillary office area (203 sq. m). development will also include: a vehicular entrance/exit via Brownsbarn Drive; a pedestrian access via Brownsbarn Drive; 25 No. ancillary car parking spaces; bicycle parking; ancillary HGV yard; level access goods doors; dock levellers; access gates; hard and soft landscaping; lighting; boundary treatments; and all associated site development works above and below ground.

Retention Permission for timber cabin used as art studio with sessional art classes to rear of existing house

For Blanket installation of photovoltaic panels (PV) over existing warehouse roof footprint circa 11,400m2 and all associated works. PV panels will not extend above parapet line. Permission is being sought as building is located between Baldonnell and Tallaght University Hospital Solar Safeguarding Zones