Removal of existing front boundary wall and right hand side pillar. Rebuild pillar in new Location. Additional pavement dishing and replace grass lawn with gravel finish.

Removal of existing ground floor porch structure and chimney to side elevation; construction of new single storey extension to the front and side elevations; construction of a new single storey extension to the rear elevation; construction of a new first floor extension to front elevation; alterations to existing first floor structure to allow for a revised pitched roof design with a roof light and rooflight to rear roof slope; installation of external insulation to existing dwelling and proposed new elements; all associated internal alterations, demolitions, site boundaries, landscaping, drainage and ancillary works.

Retention of change of use of existing detached single storey building to family unit. Permission for the construction of a single storey link extension from existing building to existing house, minor internal amendments to existing structure and all associated site works.

Retention of change of use of existing detached single storey building to family flat. Permission for the construction of a single storey link extension from existing building to existing house; installation of a ground floor side window in existing house; minor internal amendments to existing structure and all associated site works.

Divide existing dwelling into two separate houses; 1 four bedroom bungalow and 1 three bedroom, two storey dormer type house. The new house will incorporate a previously approved ground floor granny flat extension and first floor games room (Reg. Ref. SD10B/0218) and will involve raising the existing ridge/roof level by 300mm and fitting 4 'Velux' rooflights; off-street car parking to both houses will be provided by existing vehicular entrances; all at front and side.

Two storey extension to rear of existing building to accommodate additional vehicle service bays on the ground floor and additional office space and ancillary accommodation on the first floor.

Retention of alterations to previously approved planning application, Reg Ref No SD24B/0329 for 1) Erection of 41.5 sqm single storey ground floor extension to the rear of the dwelling with two number glazed roof lights. 2) Erection of a 6.3 sqm single storey ground floor extension to the front of dwelling with a pitched roof porch. The alterations include 1.Erect of 56.6 sqm single storey ground floor extension to the rear of the dwelling with four number glazed roof lights. 2) Erection of a 6.3 sqm single storey ground floor extension to the front of dwelling with a pitched roof porch, and change the side extension window to a door with window and all associated works at 33 Tamarisk Way, kilnamanagh, Dublin 24. D24 VNX0.

The proposed development will consist of 1) Erection of 41.5 sqm single storey ground floor extension to the rear of the dwelling with two number glazed roof lights. 2) Erection of a 6.3 sqm single storey ground floor extension to the front of dwelling with a pitched roof porch, 3) Erection of 16.8 sqm first floor extension to the side of the dwelling and alterations to the main roof profile, along with all associated site works.

Installation of roof mounted solar panels over an existing Waste Transfer/Recycling building and all associated site works and services; the proposed development relates to an activity covered by an existing Waste Licence issued by the Environmental Protection Agency.

The development will consist of change of use from Retail use to retail use with ancillary off licence use

Conversion of existing attic space comprising of modification of existing roof structure, raising of existing gable c/w window, new access stairs, 2no. roof windows to the front and flat roof dormer to the rear

(I) Change of use of ground floor (1,002 sq.m gross) from wholesale light manufacturing uses for the clothing trade to light industrial with ancillary testing area (fitting rooms, club building workshop putting and chipping greens and fitting bays) for sports equipment manufacture and an area of display of golf equipment and clothing/accessories for wholesale, together with associated/ancillary reception area, refuse storage, bicycle parking (5 no. spaces) and circulation.(ii) Provision of a new first floor of 833 sq.m gross for use as light industrial use to facilitate electric buggy repair (428 sq.m) and staff canteen (75 sq.m), together with associated/ancillary circulation (iii) Provision of a new second floor of 810 sq.m gross for use as storage, including plant. (v) Minor amendments to roof to facilitate AOV's and air extract ducts (vi) 1 no. new non-illuminated sign of 20.2 sq.m on the south-west (rear) elevation and 1 no. illuminated (blacklit) sign at fascia level to the north-east elevation 2.15 sq.m.

Amendment to previously permitted planning for change of use of part of existing industrial unit to motor showroom, Reg. SD19A/0199 (floor area of additional change of use 130sq.m).

Construction of a two storey motorcar retail showroom (c. 904sq.m); 2 floors of ancillary offices and associated uses; access to be provided from existing entrance the internal circulation road to the west; provision of 19 visitor and staff surface car parking (1 disabled access space, 2 electric vehicle charging spaces and 4 bicycle parking spaces); 89 spaces for the display and valet of vehicles, including display area; signage comprising 3 totem signs (2 x 6m and 1 x 7.5m in height) and 5 elevational signs (c. 20.19sq.m of signage in total); single storey substation and bin store as well as all associated infrastructure, landscaping and associated site development works including plant and PV panels at roof level all on a site of c. 0.59ha.

Front porch and pitched canopy at front and side. Retention of existing single storey extension at side.

Alterations to existing hip roof to incorporate a 'Dutch' half-hipped roof design with attic stairs to allow conversion of attic into non-habitable storage space and installation of two velux windows to the front elevation at 15 Ashfield Avenue, Kingswood Heights, Tallaght, Dublin, D24XK5K

An attic conversion to hobby room with alterations to the existing tiled hip roof, construction of a 'Dutch' style gable hip roof to the side and a new dormer roof extension and window to the rear, internal alterations to layout, new internal stairs, roof lights to the front & side and all associated site works.

The development shall consist of retention of Collect and Go Coffee Dock, together with associated services and signage.

Change of use of two community hall meeting rooms - to be used as Montessori classrooms with separate access and the use of kitchen, storage and WC facilities for the same.

Retention permission is sought for an existing free standing advertisement sign located within the subject grounds fronting onto the junction of Upper Ballymount Road and Calmount Road Dublin 24.

Demolition of industrial shed attached to existing industrial building.

The existing single-storey extension will be demolished, and a new single-storey extension will be added to the side of the main house, linking the two buildings. Second single-storey extension to the side of the linked building. Dormer window to the rear roof area of the new extension. New single-storey porch to the front.

The retention of the change of use for the portion of site highlighted on the accompanying drawings into commercial use for the sale of motor vehicles. The retention of the additional staff cabin accommodation of 48.77 sq.m gross floor area, clad in aluminium to selected colours to match the adjacent main car showroom building The retention of the following site works; creation of new hard standing areas for the parking of cars, the construction of a new retaining wall boundary with railings over to the east, the erection of new palisade fencing and gate to delineate the new from existing site, removal of existing foliage The retention of building signage displaying company name and logo of 4.2 sq.m

The installation of a new external door to the rear facade & internal alterations at ground floor.

Erect 525sq.m. of photovoltaic panels on the roof of existing unit with all associated site works.

The change of use from warehouse to data repository facility, alterations to external facades, provision of a new 1100mm parapet, reclad roof, internal alterations, refurbishment of the existing office space, solar panels at roof level, external plant at ground and roof levels and equipment to include 12 condenser modules, an emergency back-up generator and associated fuel storage tank, transformer, extension to the existing sub-station (c. 13sq.m), 2 sprinkler tanks and pumphouse, bin store, 22 parking spaces including 2 electrical vehicle charging points, bicycle parking shelter, landscaping, planting, new security fence, external lighting, CCTV, altered vehicular gates, permeable hard surfaces, alterations to internal foul sewerage and water supply networks, provision of SuDS compliant surface water drainage system and all associated site works.

Change of use of c.12.25sq.m of floorspace within the existing warehouse building on site, from warehouse use to use for the temporary storage of shredded electrical & electronic equipment and components.

Alterations to existing hip roof to side to create a gable roof to accommodate attic stairs to allow conversion of attic into non habitable storage space with dormer to rear. Frosted window to side gable with roof windows to front roof. Single storey extension to porch, bay window to front and all ancillary works.

Planning permission is sought for the following alterations: • Internal alterations at the ground floor level of the permitted warehouse/logistics unit, including a change of use of 310 sq.m, to provide additional ancillary staff welfare facilities and ancillary office accommodation; • Provision of an additional 158 sq.m at first floor level for ancillary office accommodation; • Amendments to façade treatment including signage and louvres; • Repositioning of the roof mounted Solar PVs; • Other associated alterations including to the landscaped areas; and • All associated development works Retention permission is sought for the following: • Reconfiguration of car parking layout, including amendments to circulation arrangements adjacent to the building entrance. No change is proposed to the overall number of car parking spaces; • Repositioning of the bicycle shelters; • Amendments to façade treatment, including: o Reconfiguration of glazing mullion centres and incorporation of additional opening sections; o Provision of a first-floor opening vent window to Staircore 2; o Minor adjustments to the cladding arrangement at parapet level; • Repositioning of the roof mounted AOVs; and • All associated site development works. The proposed alterations result in an overall increase of 158 sq.m in the total GFA of the warehouse/logistics unit from 3,026 sq.m to 3,184 sq.m (including ancillary office and staff welfare facilities).

Conversion of existing attic space; modifications of existing roof structure to gable, raising existing gable wall, dormer to rear and new access stairs.

Construction of a new single storey extension to the front of existing dwelling comprising of living room extension and porch.

Planning permission for a proposed change of use of 3,875 sq.m. floorspace from office-based industry to office use. The proposed development also includes reconfiguration of car parking area resulting in replacement of 4 no. existing car parking spaces with 40 no. bicycle parking spaces, along with all associated site works to facilitate the development.

Proposed single storey front extension incorporating an open porch to the existing 2 storey semi-detached dwelling, along with a single storey, flat roof rear extension, proposed internal alterations to the existing ground and first floors along with renovation works to an existing rear garden ancillary building to create an ancillary garden room with office area

Construction of 3 no. enterprise / light industrial / wholesale outlet units (Units A, B and C), including ancillary office / administration areas over two levels, with a total GFA of 1,576 sq.m. The proposal includes 25 no. car parking spaces (which includes 2 no. van parking spaces), 20 no. cycle spaces, a Unit Substation, signage zones for the units delivery / loading areas, landscaping, boundary treatments, lighting, PV panels, foul and surface water drainage and all associated development. The proposal forms an extension to the development permitted under Reg. Ref.: SD22A/0099 and includes vehicular and pedestrian access off the permitted internal access road to the immediate south of the proposed units. The application site is located to the north west of, and will be accessed from, the development permitted under Reg. Ref.: SD22A/0099 (to be known as Apex Hub), and is located to the southeast of Crosslands Business Park, Ballymount Road Lower.

Retention permission is sought for: Part (104 sq.m gross) of the first floor currently in light industrial use at Unit 5-9: Enlargement of ground floor window at Unit 5-9 on the north elevation enlargement of first floor windows at Unit 5-9 on the south elevation. Planning permission is sought for: (i)The change of use of Unit 4 (of 292.5 sq.m), including that part at first floor (104 sq.m) for which retention permission is sought, from light industrial use to office based industry use and amalgamation of Unit 4 with Unit 5-9 (1,505 sq.m gross) to provide a single office based industry unit of 1,797.5 sq.m gross together with all associated and ancillary works, including internal fit-out. (ii) At the south elevation of Unit 4: a. At ground floor, existing door, external shutter box, all supports and electrics to be removed and to be replaced with a new glazed door unit, and existing roller shutter door and all supports/electrics to be removed and replaced with new window unit. b. At first floor, 2 no. new aluminium/glass windows. (iii) 4 no. bicycle parking spaces, including provision for cargo bike.

Installation of a new external door in the Northwest Elevation to access a new ESB meter enclosure at ground floor of Unit 26C Fashion City, Ballymount Road Upper, Dublin 24

The construction of a two storey stand-alone café/restaurant unit, with an overall height of c. 8m and a gross floor area of 441 sq.m, and associated ancillary drive thru lane, located to south of the permitted Apex Hub at Ballymount Industrial Estate (permitted under Reg. Ref.: SD22A/0099 as amended); The ancillary drive-thru lane, includes a canopy and service hatch on the northwestern elevation side of the unit, a height restrictor / entrance barrier on the access lane and a 3.5m wide drive-thru lane; The proposal includes associated drive-thru signage consisting of 1 no. directional sign, 1 no. order station, and 2 no. menu boards/advertisement signs and tenant signage on the southeastern, northeastern and northwestern elevations; The development includes associated soft and hard landscaping, associated outdoor seating area and external bin store for the proposed café/restaurant unit; The development includes a total of 19 no. car parking spaces including 4 no. EV spaces, 2 no. accessible spaces and 3 no. Staff parking spaces, waiting area, bin store and 10 no. cycle parking spaces; The development includes the repositioning of 2 no. permitted pedestrian crossing to the east of the site (permitted under Reg. Ref.: SD22A/0099); and All associated development. The proposed café/restaurant, with associated ancillary drive-thru lane, supersedes the permitted café unit on the subject site under Reg. Ref.: SD22A/0099.

The reconfiguration of 47No existing staff car parking spaces to allow for safer movement of vehicles and temporary storage of materials elsewhere in the existing yard, including new staff vehicular and pedestrian entrances and other associated minor works which are similar to what is currently permitted as part of a more substantial development Reg Ref SD19A/0222

Erection of a 6000mm high totem style site sign for the Turnpike Business Park; the totem will be 1800mm wide x 250mm deep in plan, including lettering/numerals and illuminated elements to it's north and south sides and will be located at the east boundary of the site near the site entrance; associated works.

Permission is sought by Cleargate Limited for (1) retention of change of use from Cafe/Restaurant to wholesale outlet (25A - unit50sqm) (2) Retention of change of use of Cafe/restaurant to wholesale outlet (unit 25B - 63smq) and (3) Permission for change of use of cafe unit (unit 25 - 61sqm) to wholesale outlet and incorporation into Unit 25B at Fashion City, Ballymount Road Upper, Ballymount Road Upper, Ballymount Dublin 24.

Retention Planning Permission for (a) an existing side pedestrian entrance/access gate leading onto Treepark Road, and (b) an existing high-level boundary wall to the front of the existing dwelling house.

Proposed 18m Multi-operator Streetpole Solution and ground equipment cabinet

Single storey outbuilding (29.14sq.m) to rear of overall property and associated site works.

Permission for a) the erection of a fully serviced part two-storey, part single storey dwelling house linked to the existing single-storey family flat, and b) the demolition of the existing single-storey store/office outbuilding, storage container, shed, canopy, and gate to the side of the existing dwelling house. All with associated and ancillary site works

The installation of a 1.62m x 0.87m x 0.5m (HxWxD) gas pressure reduction unit and 3.25m (H) vent stack, with all ancillary services and associated site works.

Attic conversion, raising of gable end to change roof profile with dormer projecting window to rear for playroom use/ storage and all associated site works.

Sub-division of existing site and construction of a new two storey dwelling; use of existing domestic side entrance; associated car parking; boundary wall to side forming boundary; all associated site works.

Construction of new single story extension to side and front.

Front porch & toilet single storey extension; extend existing ridge tiles & hipped tiled roof to form a new Dutch type roof structure; two storey extension to the rear with a ground floor extension with a tiled roof over & a reduced floor area to the first floor extension with a flat roof; extend existing gable structure up to new soffit level; new door/window & three new obscure double glazed windows in gable; new attic conversion with new dormer roof structure in existing rear tiled roof; internal alterations; new external finishes to match existing & associate site works.

Construction of a 6.4sq.m full width single storey extension to the front of dwelling.