Partial dishing of kerb at vehicular entrance

Construction of a two storey motorcar retail showroom (c. 904sq.m); 2 floors of ancillary offices and associated uses; access to be provided from existing entrance the internal circulation road to the west; provision of 19 visitor and staff surface car parking (1 disabled access space, 2 electric vehicle charging spaces and 4 bicycle parking spaces); 89 spaces for the display and valet of vehicles, including display area; signage comprising 3 totem signs (2 x 6m and 1 x 7.5m in height) and 5 elevational signs (c. 20.19sq.m of signage in total); single storey substation and bin store as well as all associated infrastructure, landscaping and associated site development works including plant and PV panels at roof level all on a site of c. 0.59ha.

Construction of single storey extension and porch to the front of existing dwelling comprising of living room.

The development seeking retention permission consists of the construction of a single-storey porch to the front of the house, alterations to existing vehicular entrance and the application of stone cladding to the front of the house at ground floor level. The development seeking permission for development consists of narrowing the existing opening to 3.5m.

Erect 525sq.m. of photovoltaic panels on the roof of existing unit with all associated site works.

Part two storey and part single storey extension to side and rear of dwelling with subsequent sub division of dwelling into 1 two storey, three bed dwelling (floor area 91.5sq.m) and 1 two storey four bed dwelling (floor area 152.30sq.m); re-instate front boundary wall incorporating 2 new vehicular entrances and associated site works.

Replace condition 4 (stating a limit of 15 children) Ref. SD03A/0384 with a new limit of 32 children in sessional care in compliance with current ratios of floor area to number of children as set out in the childcare act 1991 (Early Years Service) Regulations 2016.

For widening of existing front vehicular entrance to 3.5m with gated access and associated dishing of kerbing. Works also include removal of existing boundary hedge with 1A The Rise and construction of 1.2m side boundary wall between the front gardens of the houses and all associated works

The retention of the change of use for the portion of site highlighted on the accompanying drawings into commercial use for the sale of motor vehicles. The retention of the additional staff cabin accommodation of 48.77 sq.m gross floor area, clad in aluminium to selected colours to match the adjacent main car showroom building The retention of the following site works; creation of new hard standing areas for the parking of cars, the construction of a new retaining wall boundary with railings over to the east, the erection of new palisade fencing and gate to delineate the new from existing site, removal of existing foliage The retention of building signage displaying company name and logo of 4.2 sq.m

The installation of 1No. Skylight and all associated works in the Roof

Installation of a new external door in the Northwest Elevation to access a new ESB meter enclosure at ground floor of Unit 26C Fashion City, Ballymount Road Upper, Dublin 24

Construct a single-storey extension to the front, and all ancillary works necessary to facilitate the development.

Retention permission is sought for an existing free standing advertisement sign located within the subject grounds fronting onto the junction of Upper Ballymount Road and Calmount Road Dublin 24.

Retention permission is sought for: Part (104 sq.m gross) of the first floor currently in light industrial use at Unit 5-9: Enlargement of ground floor window at Unit 5-9 on the north elevation enlargement of first floor windows at Unit 5-9 on the south elevation. Planning permission is sought for: (i)The change of use of Unit 4 (of 292.5 sq.m), including that part at first floor (104 sq.m) for which retention permission is sought, from light industrial use to office based industry use and amalgamation of Unit 4 with Unit 5-9 (1,505 sq.m gross) to provide a single office based industry unit of 1,797.5 sq.m gross together with all associated and ancillary works, including internal fit-out. (ii) At the south elevation of Unit 4: a. At ground floor, existing door, external shutter box, all supports and electrics to be removed and to be replaced with a new glazed door unit, and existing roller shutter door and all supports/electrics to be removed and replaced with new window unit. b. At first floor, 2 no. new aluminium/glass windows. (iii) 4 no. bicycle parking spaces, including provision for cargo bike.

Demolition of industrial shed attached to existing industrial building.

Permission is sought by Cleargate Limited for (1) retention of change of use from Cafe/Restaurant to wholesale outlet (25A - unit50sqm) (2) Retention of change of use of Cafe/restaurant to wholesale outlet (unit 25B - 63smq) and (3) Permission for change of use of cafe unit (unit 25 - 61sqm) to wholesale outlet and incorporation into Unit 25B at Fashion City, Ballymount Road Upper, Ballymount Road Upper, Ballymount Dublin 24.

Construction of a single storey extension to the side & rear of the existing two storey dwelling and all associated site works.

The installation of a 1.62m x 0.87m x 0.5m (HxWxD) gas pressure reduction unit and 3.25m (H) vent stack, with all ancillary services and associated site works.

Planning permission for a proposed change of use of 3,875 sq.m. floorspace from office-based industry to office use. The proposed development also includes reconfiguration of car parking area resulting in replacement of 4 no. existing car parking spaces with 40 no. bicycle parking spaces, along with all associated site works to facilitate the development.

Single Storey to the rear. Demolition of existing garage, Alterations to boundary walls to the side and rear and all associated site works to existing dwelling house

Permission for retention for the application of external wall insulation on all facades of the dwelling, with indistinguishable rendered finish throughout all facades.

New rear dormer structure at attic level and conversion of the attic space to habitable space with ensuite

Conversion of Attic Space to non-habitable space dormer to rear, 2no Velux to front, door to side, single storey extension to rear and all associated site works

The change of use from warehouse to data repository facility, alterations to external facades, provision of a new 1100mm parapet, reclad roof, internal alterations, refurbishment of the existing office space, solar panels at roof level, external plant at ground and roof levels and equipment to include 12 condenser modules, an emergency back-up generator and associated fuel storage tank, transformer, extension to the existing sub-station (c. 13sq.m), 2 sprinkler tanks and pumphouse, bin store, 22 parking spaces including 2 electrical vehicle charging points, bicycle parking shelter, landscaping, planting, new security fence, external lighting, CCTV, altered vehicular gates, permeable hard surfaces, alterations to internal foul sewerage and water supply networks, provision of SuDS compliant surface water drainage system and all associated site works.

Demolition of the existing sunroom to rear and the construction of a single storey extension with garage to side and rear of existing house and a porch extension to front. New boundary wall to side. A first floor pitched roof extension with 2 rooflights, 2 dormer windows and the installation of solar panels on the South West facing roof.

Erection of a 6000mm high totem style site sign for the Turnpike Business Park; the totem will be 1800mm wide x 250mm deep in plan, including lettering/numerals and illuminated elements to it's north and south sides and will be located at the east boundary of the site near the site entrance; associated works.

Construction of an attic level dormer window with increased ridge height on existing house located to the rear roof plane and all associated site works.

Change of use of c.12.25sq.m of floorspace within the existing warehouse building on site, from warehouse use to use for the temporary storage of shredded electrical & electronic equipment and components.

Retention of north-eastern boundary wall (height 1.3m), including a 1.57m wide pedestrian entrance

(i) The construction of two number four bedroomed detached houses with dormer structures and all associated works. The houses consist of living room, utility, kitchen, WC and store at ground floor, three bedrooms, WC and store at first floor bedroom/attic area with ensuite at dormer attic level. (ii) raising existing side boundary wall to 2m high up to main building line on the north east, construction of new boundary wall between two dwellings and new 3.5m wide front entrances to both dwellings. (iii) private amenity space, boundary treatment, landscaping, SuDS drainage and all ancillary works necessary to facilitate the development. (iv) removal of existing trees at south-east of the site and replanting of same species trees to the north-east (v) extending the public road and footpath to be taken in charge on Elmcastle Court and relocating existing public lighting pole at south-east of site.

Construction of an extension at first floor level to the front (north) elevation providing an additional 2 bedrooms to the property together with a single storey rear extension providing an additional living room area and wc; with all associated removal works to the existing roof, removal of wall sections, removal of existing windows, site development works, drainage and landscaping.

Single storey extension to side & rear of existing dwelling with internal alterations and all associated site works.

Permission for the proposed removal of redundant antenna to roof of existing dwelling and construction of a two-storey extension with pitched roof to side of existing dwelling, new two-storey and single storey extension with flat roof to rear of existing dwelling and a new single storey shed to rear garden. Proposed new pedestrian gate to side boundary wall to rear garden. All other associated ancillary site works included in the application.

Install a second cremator within the existing crematorium building to be powered with electricity; the new unit will be located beside the existing unit within the building (the building was originally designed and built for 2 units); internal alterations to the building including removal of non-load bearing block walls to facilitate the new unit; extension to the west side of the building to provide staff changing facilities and a cremulator room (20.2sq.m); extract system to be connected to the existing flue; partial demolition of existing boundary wall to facilitate a new sub-station/switch room, the laying of underground ducts for ESB connection, underground cabling and all ancillary works to facilitate the development.

Amendments to previous approved Planning Permission Ref. SD21A/0044 for part change of use to facilitate new coffee shop unit at ground floor and a school aged child care unit at part of first floor level, that will be used during primary school term, with area remaining for club activity use at all other times and all associated works.

Construction of a new two storey clubhouse (658sq.m); new external activity area (405sq.m); new boundary fencing for external activity area and all associated site works adjacent to existing all weather pitch.

Planning permission is sought for the following alterations: • Internal alterations at the ground floor level of the permitted warehouse/logistics unit, including a change of use of 310 sq.m, to provide additional ancillary staff welfare facilities and ancillary office accommodation; • Provision of an additional 158 sq.m at first floor level for ancillary office accommodation; • Amendments to façade treatment including signage and louvres; • Repositioning of the roof mounted Solar PVs; • Other associated alterations including to the landscaped areas; and • All associated development works Retention permission is sought for the following: • Reconfiguration of car parking layout, including amendments to circulation arrangements adjacent to the building entrance. No change is proposed to the overall number of car parking spaces; • Repositioning of the bicycle shelters; • Amendments to façade treatment, including: o Reconfiguration of glazing mullion centres and incorporation of additional opening sections; o Provision of a first-floor opening vent window to Staircore 2; o Minor adjustments to the cladding arrangement at parapet level; • Repositioning of the roof mounted AOVs; and • All associated site development works. The proposed alterations result in an overall increase of 158 sq.m in the total GFA of the warehouse/logistics unit from 3,026 sq.m to 3,184 sq.m (including ancillary office and staff welfare facilities).

Construction of new side dormer structure at attic level and conversion of the attic space to a bedroom and bathroom. The dormer structure allows for stair access and a functioning bedroom and bathroom with limited space available from the existing hipped roofed structure

(1) Change of use of the existing ground floor (411sq.m) and first floor (401sq.m) levels from previously granted Showroom/Warehouse storage under Reg. Ref. S01A/0173 and further extended under Reg. Ref. SD02A/0514 to office use. (2) Modifications to the front facade comprising the replacement of the main entrance doors at ground floor level with glazing to match the existing, the installation of a new window to match existing at first floor level and new signage (2sq.m). (3) Modifications to the rear facade comprising the replacement of the existing roller shutter at ground floor level with fixed curtain wall glazing to match existing and the installation of new fixed louvres to match existing at first floor level.

Construction of a single storey (staff room) extension to the front (southeast) of the school (including a rooflight); construction of a single storey classroom extension to the rear (northwest) of the school; All associated elevational changes, internal alterations, site, landscaping and ancillary works.

The reconfiguration of 47No existing staff car parking spaces to allow for safer movement of vehicles and temporary storage of materials elsewhere in the existing yard, including new staff vehicular and pedestrian entrances and other associated minor works which are similar to what is currently permitted as part of a more substantial development Reg Ref SD19A/0222

Construction of 3 no. enterprise / light industrial / wholesale outlet units (Units A, B and C), including ancillary office / administration areas over two levels, with a total GFA of 1,576 sq.m. The proposal includes 25 no. car parking spaces (which includes 2 no. van parking spaces), 20 no. cycle spaces, a Unit Substation, signage zones for the units delivery / loading areas, landscaping, boundary treatments, lighting, PV panels, foul and surface water drainage and all associated development. The proposal forms an extension to the development permitted under Reg. Ref.: SD22A/0099 and includes vehicular and pedestrian access off the permitted internal access road to the immediate south of the proposed units. The application site is located to the north west of, and will be accessed from, the development permitted under Reg. Ref.: SD22A/0099 (to be known as Apex Hub), and is located to the southeast of Crosslands Business Park, Ballymount Road Lower.

Single storey extension to the side and front of existing house & associated site works.

The construction of a two storey stand-alone café/restaurant unit, with an overall height of c. 8m and a gross floor area of 441 sq.m, and associated ancillary drive thru lane, located to south of the permitted Apex Hub at Ballymount Industrial Estate (permitted under Reg. Ref.: SD22A/0099 as amended); The ancillary drive-thru lane, includes a canopy and service hatch on the northwestern elevation side of the unit, a height restrictor / entrance barrier on the access lane and a 3.5m wide drive-thru lane; The proposal includes associated drive-thru signage consisting of 1 no. directional sign, 1 no. order station, and 2 no. menu boards/advertisement signs and tenant signage on the southeastern, northeastern and northwestern elevations; The development includes associated soft and hard landscaping, associated outdoor seating area and external bin store for the proposed café/restaurant unit; The development includes a total of 19 no. car parking spaces including 4 no. EV spaces, 2 no. accessible spaces and 3 no. Staff parking spaces, waiting area, bin store and 10 no. cycle parking spaces; The development includes the repositioning of 2 no. permitted pedestrian crossing to the east of the site (permitted under Reg. Ref.: SD22A/0099); and All associated development. The proposed café/restaurant, with associated ancillary drive-thru lane, supersedes the permitted café unit on the subject site under Reg. Ref.: SD22A/0099.

Front porch and two storey extension to the side and rear of existing dwelling.

Retention of vehicular access/egress and associated parking provided for the former temporary school accommodation on vacant site to rear.

Erection and installation of 124 photovoltaic solar panels with an area of 235.6sq.m (with average size of 1.9sq.m per panel) on the existing roofslope and all associated alterations to existing elevations, site and ancillary works.

(i) Conversion of existing attic to non habitable storage use; (ii) provision of dormer window to the rear and all associated site works.

Design alterations to development permitted under ref. SD21A/0347 (extension to paint workshop) involving removal of existing 436sq.m store unit and enlargement of the permitted 980sq.m extension to 1,661.1sq.m (an increase of 681.1sq.m, bringing the total paint workshop unit to 3,216sq.m), together with new steel roof sheeting at the northern entrance to the permitted extension and the provision of 2 accessible parking bays and 2 electric vehicle parking bays and all associated site development works.

Construction of a single storey extension (980sq.m) to paint workshop with canopy; two access doors with roller shutters and all associated site development works.