The development will consist of a 4.42 hectare stie currently in use as Greenogue Recycling to include the following; A) Demolition of existing green recycling structures on site including office and storage shed with total area of 2,265m2. B) Construction of 7 no. warehouse units, with maximum height of 15.3 meters, all with ancillary office, staff areas, bin stores etc. Each unit has access to service yard and HGV loading / unloading area. The total floor area of the warehouse development is 16,602.2 m2, made up as follows; i) Unit 1 - gross floor area of 3,851.1 m2. ii) Unit 2 - gross floor area of 3,886.8 m2. iii) Unit 3 - gross floor area of 2,758.3 m2. iv) Unit 4 - gross floor area of 1,685.4 m2. v) Unit 5 - gross floor area of 1,062.2 m2. vi) Unit 6 - gross floor area of 1,679.2 m2. vii) Unit 7 - gross floor area of 1,679.2 m2. C) Access to be provided from existing entrance to the site via Tay Lane. New footpaths / cyclepaths throughout the site including a new footpath / cyclepath connection to the Greenogue Logistics Park to the north of the site. D) 170 no. car parking spaces and 100 no. secure, sheltered bicycle parking spaces to serve the warehouse units. E) All ancillary site development works to include; minor realignment of site entrance, landscaping, internal raods, drainage, utility services, service yards, HGV loading / unloading areas, level access goods doors, dock levellers, site lighting, boundary treatments, signage, storm water drainage network, underground water and foul servicing, green roofs on warehouse units, form part of this application.
The development will comprise the provision of a warehouse with ancillary office and staff facilities. The warehouse will have a maximum height of 19.2 metres with a gross floor area of 34,737 sq m, including warehouse area (32,404 sq m) and ancillary office and staff facilities area (2,333 sq m). The development, which will have a total Gross Floor Area of 34,999 sq m, will also include: 1 No. multi-modal entrance to the site from Greenogue Logistics Park; 156 No. car parking spaces; HGV parking spaces and yard; 90 No. covered bike parking spaces; dock levellers; green walls, sprinkler tank and pumphouse (219 sq m); ESB substation (43 sq m); gates; hard and soft landscaping and boundary treatments; and all associated site development works above and below ground.
Remove sections of existing grass margin and grass verge and extend concrete apron to front and rear of existing public footpath, install accessible kerb and erect of a proposed new stainless steel and glass bus shelter, 5.2m x 1.85m x 2.8m high on the public footpath with 2 No. LED illuminated Advertising Panels each of 2.0 square metre area.
Construction of a single storey slipped roof design bungalow. A septic tank discharging to a subsurface trench percolation area. Upgraded existing entrance to a domestic vehicular and business entrance. A bored well. The commencement of a canine accommodation business. The construction of eighteen kennel cubicles which could accommodate up to eighteen dogs and which will be used as part of this new business. The provision of canine wastewater storage facilities (which will accommodate wastewater prior to being transported off-site by a licensed contractor. All associated site works.
A single storey slipped roof design bungalow. A septic tank discharging to a subsurface trench percolation area. Upgraded existing entrance to a domestic vehicular entrance to the requirements of The Roads Department of South Dublin County Council. A bored well. All ancillary groundworks associated with the above.
Land recontouring/infilling works on C. 38,000sq.m of a folio size of C.5.3HA (allowing buffers); the volume of material to be placed on the site C.91,000m3 with an average fill level of C.3.5m above existing.
Erection of a slatted livestock shed which will include slatted tanks, a creep area for calves and walkway, centre feed passage, manure pit, concrete yards and ancillary works.
The erection of an underground clean water harvesting tank under existing agricultural shed constructed under Pl. Ref. No. SD24A0033.
Alterations to existing granted planning, Ref. SD19A/0065, for a proposed Waste Metal Transfer Facility including Waste Electric & Electronic Equipment (WEEE). The subject alterations for which planning permission is sought for are as follows: (1) Reconfiguration of the floor plan areas as follows: (A) Provision of 535sq.m additional floor area due to introduction of areas as follows - (A.1) Extended display area at ground floor of ancillary office, addition of 46sq.m floor area, (A.2) Extended open plan office at first floor of ancillary office, addition of 20sq.m floor area, (A.3) Single storey ancillary storage facility to the front north-east elevation totalling 166sq.m with overall height 7m, (A.4) Mezzanine area to the south eastern side of Light Industrial Unit, totalling 303sq.m. Alterations listed above result in total building area Increase from 4391sq.m to 4926sq.m as shown at the revised table of gross Internal floor areas & uses. (B) Change of use of 64sq.m of light industrial unit floor area to staff facilities due to the introduction of: (B.1) Enclosed stairs from Light Industrial Unit to ancillary office/staff facilities (overall 31sq.m), (B.2) single storey cleaners store and storage at ground floor to the north-eastern comer of light industrial unit (overall 33sq.m). (C) Change of use of 100sq.m of workshop charging area & staff facilities to workshop area & single storey office/staff facilities. (D) Introduction of full height dividing wall at light industrial unit. 2. Elevations alterations as per list above plus additional alterations as follows: (a) Provision of full height cladding (ground floor to roof) to light industrial unit and ancillary Workshop. (b) Introduction of 11m wide x 6m high open to light industrial unit side (north-western) elevation, (c) Rearrangement of all fire exit & level access doors to light industrial unit & ancillary workshop including omission and addition of the same, (d) Introduction of integrated modular louvre system to light industrial unit rear (southwestern) & side (north-western) elevation, (e) Introduction of canopies to the ancillary office main entrance and above 11m wide open & dock levellers to light industrial unit side (north-western) elevation. (3) Site plan alterations as follows: (a) Rearrangement of car parking spaces due to provision of office extended display area to the front (north-eastern) elevation, (b) Provision of new finish floor level to office/staff facilities and Workshop and associated site levels adjustments, (c) Provision of a new boundary fence type (paladin fence) throughout the development, (d) Provision of additional weighbridge - overall 2 proposed and rearrangement of brush wash and steam wash between workshop and site's north-western boundary, (e) Provision of building protection bollards to workshop side elevations (south-east and northwest), (f) Associated drainage adjustments due to the inclusion of the alterations above plus reduction of surface water and foul sewer outfall route as per as built access road and services which serve built developments to the east of the site. All other details such as landscaping, lighting, external surface finishes, Environmental Impact Assessment Report (EIAR), Flood Risk Assessment etc. will remain as per the granted application ref. SD19A/0065.
Alteration to previously granted planning permission (Reg. SD19A/0407, SD21A/0200 & SD22A/0092) for development at Site C (2.7ha site).
Amendments principally comprising of an overall increase in the commercial floor area by 15,479sq.m from the permitted 13,959sq.m to 29,438sq.m; the permitted scheme has 3 internal ancillary office floor levels, and the proposed alterations provide 2 mezzanine levels in the warehouse area (i.e a total of 5 internal floor levels); the permitted maximum height of the development at 23.7 metres will remain unchanged; the additional 15,479sq.m development proposed will comprise an increase in the warehouse floor area from 12,369sq.m to 13,353sq.m, staff facilities from 548sq.m to 2,582sq.m and ancillary office area from 1,042sq.m to 2,437sq.m; in addition to the provision of a 2 storey mezzanine warehouse area (9,703sq.m), integrated plant room (434sq.m) and plant area on 2 floors (929sq.m); construction of a 2 storey car-parking area (4,057sq.m and 7.8m height) to accommodate an increase from the previously permitted 119 ancillary car parking spaces to 190 car parking spaces; 13 designated van parking spaces (no dedicated van spaces previously proposed); 72 permitted cycle parking spaces; reconfiguration of the HGV yard and an increase in the number of HGV dock levellers from 12 to 14 and the provision of 16 van loading level entry doors; the provision of an additional egress on the eastern boundary to facilitate vans exiting the site; sprinkler tank and associated underground pumps; repositioned ESB substation (15sq.m and 3m height); bin storage (42sq.m and 2.9m height); amended lighting layout; signage; modifications to hard and soft landscaping and boundary treatments; and associated site development works above and below ground.
Modifications to a permitted warehouse development (as granted under SD19A/0407, as amended by SD21A/0200); The amendments principally comprise an overall increase in the commercial floor area of the warehouse by 2,334sq.m from the permitted 27,683sq.m to 30,017sq.m; The modifications proposed include: an increase in plant/machinery areas from 1,363sq.m to 3,933sq.m (principally through the provision of an additional mezzanine level within the warehouse area to accommodate plant/machinery); a reduction in the permitted mezzanine level 2 from 9,703sq.m to 9,349sq.m (principally through the provision of opes in the mezzanine floor to accommodate machinery associated with an advanced picking system); an increase in warehouse floor area from 14,225sq.m to 14,282 sq.m; an increase in staff facilities from 1,616sq.m to 1,659sq.m; and an increase in ancillary office area from 776sq.m to 794sq.m; The development will also include: the provision of security hut (14.7sq.m) close to the southern site boundary; the relocation of the building's main entrance stair core at the western elevation; elevational changes including the repositioning of 2 level entry doors and 1 dock leveller and the associated canopy, repositioning of fire escape doors, removal of 2 M&E rooms; internal modifications including the insertion of a warehouse toilet block at ground floor level, repositioning of stair cores; the provision of a pedestrian gate adjacent to the bin store; reduction in bin area from previously approved 45sq.m to 38sq.m; provision of compactor in place of 1 van parking space along the south-east boundary resulting in the reduction of van parking spaces from 12 to 11 in a modified arrangement; relocation of van egress gate further south; modifications to the position of the van loading entry doors and associated canopy; modifications to hard and soft landscaping and boundary treatments including the provision of a paladin fence separating the car parking area and the HGV circulation area and removal of 2 green walls; and all associated site works above and below ground.
Provision of a warehouse unit with ancillary three storey office and staff facilities and associated development; the building will have a maximum height of 23.7m with a gross floor area of 13,959sq.m including a warehouse area (12,369sq.m); staff facilities (548sq.m) and ancillary office area (1,042sq.m); provision of one new vehicular access/egress point at the northern corner of the subject site and one HGV access/egress point at the southern corner of the subject site which connects onto the internal access road for two adjacent permitted warehouses (Reg. Ref. SD18A/0265) and permitted waste metal facility (Reg. Ref. SD19A/0065) which links to the Greenogue Roundabout on the R120; 119 ancillary car parking spaces; bicycle parking; HGV yard with 12 loading bays; level access goods doors; dock levellers; hard and soft landscaping; ESB substation (9sq.m); boundary treatments and associated site development works above and below ground.
Additional floor area of 82sq.m ground floor and 35sq.m first floor to allow reconfiguration of 4 double rooms to 8 single rooms, new ground floor storeroom and enclosing fire exit stairs; relocation of 8 car parking spaces to extended existing car park; all associated site works; proposed material finishes to match previously approved changes to previously granted permission SD20A/0153.
Permission for 609.5sq.m, 16-bed extension to existing Nursing Home which consists of new 443sq.m two storey 14 bedroom extension adjoining existing building to the west, new 64.3sq.m single storey 2 bedroom extension to south west wing of existing, new 102.2sq.m 2 storey extension of existing dining areas to the north, new garden lawns and walkway with hard landscaped areas to north west of site, 8 new car parking spaces to existing car park to east of site and all associated site works.
Erection of non-illuminated signage to the front of the building.
2 above ground firefighting water holding tanks and 2 integrated pumphouses plus ancillary works to serve the 2 industrial development sites currently under construction at Block A & B.
The development will consist of the construction of a part one-storey and part two-storey, four-bedroom dwelling house (254m2); construction of a car garage (32m2); and all associated landscaping and site works
Revisions to granted planning permission Reg. Ref. SD06A/0659 (as extended by Reg. Ref. SD06A/0659/EP for a 255 bedroom hotel in a new landmark building consisting of sub-basement and basement, ground floor and five upper floors (with a total hotel development gross floor space of approximately 28,476sq.m.); 680 underground car parking spaces; 5 coach spaces; 50 bicycle spaces; a new 9m wide vehicular, cycleway and pedestrian access approximately 900m in length from a new roundabout on the Newcastle Road (R120) in vicinity of Newcastle Manor housing estate; fire tender access road and site development and landscaping works; revisions to the permitted hotel development (which is partially constructed) will comprise construction of a retirement village in the permitted hotel grounds which will consist of: 69 individual 3 bedroom single storey retirement homes, ranging in size from 112sq.m. to 164.1sq.m; a single storey medical/health centre (146.7sq.m); a two storey community services centre (844.3sq.m); an outdoor recreation and allotment area with an associated recreation equipment store (245sq.m.) and allotment equipment store (22.8sq.m.); a nursing home/care centre to be located within the permitted hotel building necessitating a change of use of part of the hotel's accommodation block (1,653.7sq.m. at ground floor and 2,351.5sq.m. at first floor) from hotel use (comprising 92 hotel bedrooms in total) to nursing home/care centre use (comprising 60 nursing home/care centre bedrooms with associated dining, healthcare and administration facilities) as well as change of use of 302sq.m. at basement level car parking to nursing home/care centre mortuary, deliveries store and clinical waste store and all associated works, including the provision of a new entrance; new 6.4sq.m. porch and a reception area for the nursing home/care centre; new vehicular lay-by and enclosed outdoor areas for nursing home residents (the gross floor space of the hotel incorporating the nursing home/care centre will now be approximately 29,562sq.m.); and site development and landscaping works including revised site levels to facilitate surface drainage, boundary planting including reinstatement of hedgerows; 2.2m to 2.5m high fencing and automatic gates surrounding the retirement homes; a new 2.5m block wall inside the northern boundary of the site and the relocation of 11 car parking spaces at the eastern side of the access road into the development site (serving the adjacent development to the north, Reg. Ref. SD05A/0344) to the western side of the access road. The proposed revised development will have 666 underground car parking spaces, 204 surface car spaces, 5 surface coach spaces, 1 surface ambulance space and 50 bicycle spaces.
The development will consist of the construction of a part one-storey and part two-storey, four-bedroom dwelling house (235m2); construction of a car garage (32m2); and all associated landscaping and site works.
Construction of a Self-Storage building with ancillary facilities and associated development. The Self-Storage building will have a maximum height of 9.745 metres with a Gross Floor Area of 1,796 sq m including storage area (1,698 sq m) and ancillary facilities (98 sq m). The development will also include: a vehicular entrance/exit to the site via Tay Lane; 6 No. ancillary car parking spaces (including 1 No. accessible parking space); loading bays; external fire escape stairs; an external canopy; boundary treatments; hard and soft landscaping; lighting; and all associated site and development works above and below ground.
Planning Permission for Alterations to amend the previous granted permission (Reg Ref SD23A/0178) for a Self-Storage Facility revised to provide an open hard surfaced yard to be used for the parking of vehicles and trailers and external storage of non-hazardous goods with all associated works and Ancillary WC Facility at Tay Lane, Greenogue, Rathcoole, Co. Dublin. The subject alterations for which Planning Permission is sought are as follows: 1. Permitted Self-Storage Facility omitted to provide an open hard surfaced yard 2,468m2 to be used for the parking of vehicles and trailers and external storage of non-hazardous goods; 2. Provide a single storey Ancillary WC Facility, 27m2, 4.2m high, to the North-East boundary of the site. 3. Omission of 6 no. car parking spaces to the side (north-western) elevation; 4. Adjusted HGV site entrance set back to accommodate a recessed HGV Access/egress; 5. Provision of 9m wide HGV sliding gate; 6. Associated landscape adjustment due to the inclusion of the alterations above; 7. Associated drainage adjustments due to the inclusion of the alterations above.
Demolition of existing chimneys & 20.8sq.m extension to rear of existing 122.9sq.m bungalow and construction of new 91.1sq.m single storey flat roof extension to rear.
Retention application consists of the following: 1) Provision of fenced turnstile & pedestrian gate to the main building entrance on the front (north-east) elevation; 2) Provision of external ramped access to ancillary Office Block B2 and separate stepped access/egress platform on the side (north-west) elevation; 3) Provision of additional fencing and new barriers to existing HGV access/egress gate plus new pedestrian entrance gate; 4) Provision of gatehouse to HGV gate, 23m2, 3m high; 5) Provision of new paladin fence & second pedestrian gate on the side (north-west) elevation; 6) Provision of car access/egress barriers in and out and directional arrow road markings; 7) Provision of 23no. EV charging for logistics vehicles and 3 no. EV rapid chargers for logistics vehicles; 8) Provision of Sprinkler Tank 10.70m diameter, 9.39m high, effective capacity = 657m3, to rear (south-west) yard; 9) Provision of Pump House 29m2, 3.2m high, adjacent to above referenced sprinkler tank; 10) Provision of 2no. location of new paladin fence and fire tender gates within the site.
Erect 3 no. company logo advertising signs, smoking shelter, sheltered cycle parking spaces, and compactor canopy at Block B, College Lane, Greenogue Rathcoole Co. Dublin. The application consists of the following: Proposed 3no. non-illuminated signage company logo lettering; total area of 24.78m2 located 13.70m above ground floor level on the front (north-east) and side (north-west) elevation; Proposed smoking shelter located at front north-east elevation, 3.90m2, 2.68m high; Proposed 20no. sheltered cycle parking spaces at front north-east elevation; Proposed compactor canopy, 48m2, located 3.51m above ground floor level on the side north-west elevation.
Subdivision of existing Block B, College lane, Greenogue, Rathcoole, Co. Dublin (existing areas: 23,421sq.m single warehouse and 2,963sq.m ancillary office/staff facilities as granted under application Ref. SD19A/0265 into 2 warehousing units as follows: (1) Unit 81 to contain 15,815sq.m existing warehouse area, 2,905sq.m existing ancillary office/staff facilities area and (2) Unit 82 to contain 7,569sq.m existing warehouse area, 58sq.m existing ancillary staff facilities area, 37sq.m change of use of existing warehouse to ancillary office/staff facilities area at ground floor and 636sq.m additional 2-storey ancillary office/staff facilities on 1st & 2nd floor; the above proposal includes minor elevation adjustments to south & west elevation of Unit 82 to facilitate the additional ancillary office/staff facilities, subdivision of the rear HGV yard by internal fencing, provision of new HGV & car access gate to Unit 82 from the existing estate access road, provision of 36 carpark spaces including 2 disabled spaces and 24 bicycle spaces, pedestrian access & footpath from the new gate to the new ancillary office and associated drainage adjustments, note this planning submission is one of two independent applications for subdivision options to Block B.
Subdivision of existing Block B, College Lane, Greenogue, Rathcoole, Co. Dublin (existing areas: 23,421sq.m single warehouse and 2,963sq.m ancillary office/staff facilities as granted under application Ref. SD19A/0265 into 2 warehousing units as follows: (1) Unit B1 to contain 13,719sq.m existing warehouse area, 2,905sq.m existing ancillary office/staff facilities area; (2) Unit B2 to contain 9,665sq.m existing warehouse area, 58sq.m existing ancillary staff facilities area, 37sq.m change of use of existing warehouse to ancillary office/staff facilities area at ground floor and 636sq.m additional 2-storey ancillary office/staff facilities on 1st & 2nd floor; the above proposal includes minor elevation adjustments to south & west elevation of Unit B2 to facilitate the additional ancillary office/staff facilities, subdivision of the rear HGV yard by internal fencing, provision of new HGV & car access gate to Unit B2 from the existing estate access road, provision of 36 carpark spaces including 2 disabled spaces and 24 bicycle spaces, pedestrian access & footpath from the new gate to the new ancillary office and associated drainage adjustments. (Note: this planning submission is one of two independent applications for subdivision options to Block B).
(A) A horse isolation unit consisting of 3 enclosed stables, tack room, staff toilet facilities, with loft feedstore on first floor and a dormer type grooms accommodation, (B) installation of Oakstown BAF wastewater treatment system and percolation area, (C) an American barn type structure with 10 stables, feed store, tack room and staff toilet facilities and (D) construction of recessed vehicular entrance and all associated site works.
A horse isolation unit consisting of 5 enclosed stable cubicles, tack room, toilet, canteen, with loft feedstore on first floor and a dwelling unit containing two bedrooms, sitting room, kitchen/ dining area, bathroom, boot room and farm office; Installation of Oakstown BAF wastewater treatment system and percolation area; An American barn structure with 14 stables, feed store, tack room and kitchen and toilet; Construction of recessed vehicular entrance; Closure of existing agricultural access; All associated site works.
Provision of additional facilities at the existing Greenogue Equestrian Centre (permitted under SDCC Reg. Ref. SD16A/0417 and as amended under Reg. Ref. SD18A/0035) to create a sport horse Centre of Excellence comprising a new indoor sand arena (3,759sq.m); the extension of the existing main outdoor jumping sand arena 800sq.m (resulting in a total of 4,000sq.m); the extension of the existing indoor sand arena by 250sq.m (resulting in a total of 1,625sq.m); a 2 storey training and administration facility (1,300sq.m); a veterinary shed (572sq.m); a hay shed (1,209sq.m); a 2 storey visitor toilets, lockers and storage facility (200sq.m) and a single storey building (673sq.m) to accommodate a laboratory for an Assisted Reproduction Programme. The proposed development also includes the provision of 50 car parking spaces within the existing yard; 20 bicycle parking spaces; plant; hard and soft landscaping; boundary treatments; increased hard standing areas for parking and turning of horse boxes and lorries; and all associated site development works above and below ground at this 7.88 Ha (c.78,800sqm) site.
Single storey extension to the left hand side; extension to the front at ground and first floor level in order to straighten the front building line; addition of a two storey extension to the front which will act as a porch at ground floor level and a bathroom at first floor level; to face the central portion of the front elevation in natural stone over its full height; extend the existing garage on the right hand side to the front and rear; remove the existing garage roof and build a first floor extension over the entire extended garage area; existing ground floor area including the garage is 152.38 sq.m & the proposed ground floor extensions will add 101.05 sq.m.; the existing first floor are is 68.95sq.m. & the proposed first floor extension will add 115.59sq.m.; all ancillary site works required to complete the project.
Modifications to existing domestic shed; raising roof to provide additional first floor head height; revised internal layout to provide for home office, gym, tool store and wc; new window and door arrangement to front and side elevations; connection to existing on site services and all associated development works.
Alterations to previous planning application, Ref. SD13B/0117. The alterations will include revisions to the design of the proposed detached dormer dwelling at the rear of the existing dwelling. Proposed alterations are as follows: (1) new roof window and revised door to front elevation; (2) new sliding door to east elevation; (3) new corner window and new door to west elevation; (4) two new corner windows to south elevation; (5) minor changes to the internal layout of the proposed detached dormer dwelling and all associated site works.
Alterations to previous planning application, Ref. SD13B/0117. The alterations will include revisions to the design of the proposed detached dormer dwelling at the rear of the existing dwelling. Proposed alterations are as follows: (1) new roof window and revised door to front elevation; (2) new sliding door to east elevation; (3) new corner window and new door to west elevation; (4) two new corner windows to south elevation; (5) minor changes to the internal layout of the proposed detached dormer dwelling and all associated site works.
Removal of existing flat roof to the side, along with the hipped roof to the side and rear. To be replaced by a ground-floor flat roof extension with an increased height and roof light to the side, as well as a first-floor flat roof extension to the rear (South), also featuring a roof light. Additionally, there will be a single-story ground-floor flat roof extension to the rear (South). The small timber shed in the rear garden will be removed and replaced with a new shed to serve as a home office and gym.
2 semi-detached, dormer bungalows and all ancillary works on site to rear of existing dwelling.
Demolition of the existing dwelling (252sq.m) and associated domestic garage (49sq.m) and shed (12sq.m) located towards the north-west of the site and the construction of 3 warehouses with ancillary office and staff facilities and associated development as follows: Unit 1 will have a maximum height of 15.75 metres with a gross floor area of 5,619sq.m including a warehouse area (5,041sq.m), ancillary office areas (182sq.m) and staff facilities (396sq.m); Unit 2 will have a maximum height of 16.35 metres with a gross floor area of 6,724sq.m including a warehouse area (6,135sq.m), ancillary office areas (275sq.m) and staff facilities (314sq.m); and Unit 3 will have a maximum height of 18.9 metres with a gross floor area of 10,095sq.m including a warehouse area (9,335sq.m), ancillary office areas (399sq.m) and staff facilities (361sq.m); the development will also include the provision of a new vehicular access to the site from the Aerodrome Roundabout in lieu of the extinguishment of existing multiple access points from the R120 Newcastle to Rathcoole Road; internal roundabout; pedestrian access; 187 ancillary car parking spaces; bicycle parking; HGV yards; level access goods doors; dock levellers; access gates; signage; hard and soft landscaping; lighting; boundary treatments; ESB substations; sprinkler tanks; pump houses and all associated site development works above and below ground.
Construction of a 30 metre high communication structure carrying antennae and dishes with associated ground mounted equipment to share with other licensed operators within a 2.4 metre high palisade fence at existing Saggart 38kV substation site.
Construction of an outdoor all-weather horse arena and a building to contain stables to house horses and to contain farm machinery implements and fodder, also ancillary works (i.e concrete yards, gates and boundaries), also all for agricultural purposes only in new farmyard using existing farm & road entrances.
Proposed LED Flood-Lighting System on Grass Pitch consisting of 6 number 20 Metre high columns and all associated ducting, column bases and light fittings
Build agricultural farm shed positioned on existing hard standing area and completion of access road as granted under Ref. SD13A/0067.
Alterations to an existing granted planning permission (Reg. Ref. SD20A/0258) for warehousing; alterations relate to Unit 2 only on its 1.316 ha site including change of use of 24sq.m. of warehouse floor area to staff facilities due to addition of single storey staff facilities block in the south-west corner of the warehouse; change of use of 97sq.m of warehouse floor area to ancillary office (38sq.m) & staff facilities (59sq.m) due to extension of the ancillary office block on ground floor; alterations also result in increase in the overall staff facilities area by 7sq.m (from 314sq.m to 321sq.m) and increase in the overall office area by 139sq.m (from 275sq.m to 414sq.m); addition of 232sq.m of charging area (including 6sq.m change of use from warehouse to charging area) as the extension of the rear of warehouse (southern elevation); alterations result in total building area increase by 254sq.m (from 6724sq.m to 6978sq.m); associated elevational revisions; associated site plan & drainage layout adjustments due to the inclusion of the above alterations; all other details remain as per the granted application Reg. Ref SD20A/0258 such as site access, site boundaries, landscaping, external surface finishes, water supply, attenuation tank, drainage & outfalls.
1 ESB Substation and MV Switch room to serve warehouse development Block A; ESB substation and MV Switch room have a total internal floor area of 28sq.m and are 3.6m high; Block A development, currently under construction, was originally granted under South Dublin County Council planning permission Reg. Ref SD18A/0265 and SD21A/0082.
Retention of an agricultural shed (measuring c.235 sqm in floor area, ridge height of 6.126 metres and eaves of 4.975 metres), yard and all associated site works.
Amendment to SDCC Reg. Ref. SD20A/0279 to amend the floor area of the permitted single storey dwelling house and associated site development works above and below ground. The amended scheme will result in: the reduction of floorspace from 279.8 sq.m to 208 sq.m; internal reconfiguration; associated elevational amendments; and hard and soft landscaping amendments.
Single storey extension to side of existing bungalow and internal alterations comprising of 91sq.m to include new sitting room, bathroom and bedroom with en-suite.
Construction of a new detached single storey dwelling with existing vehicular access and ancillary site works.
Construction of a single storey, three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance, hard & soft landscaping; boundary treatments; all associated site development works above and below ground.
Construction of a single storey three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance; hard and soft landscaping; boundary treatments and all associated site development works above and below ground.
Reduction of the warehouse office/staff facilities block at south-east corner of the building, decreasing the overall staff facilities floor area by 290sq.m (from 396sq.m to 106sq.m) and overall office floor area by 60sq.m (from 182sq.m to 122sq.m). Change of use of 177sq.m staff facilities floor area to the warehouse floor area at the ground floor (warehouse floor area was 5041sq.m to 5218sq.m). Associated elevational revisions. All other details remain as per granted application Reg. Ref SD20A/0258 such as site access, site boundaries, landscaping, external surface finishes, water supply, attenuation tank, drainage and outfalls. The alterations relate to Unit 1 only on its 1.32ha site.