Change of use of land and building to allow for the storage (internal and external), distribution and direct trade/retail sale of gas and gear products; customer engineering services workshop; new roller shutter on rear elevation; new window and door security shutters; new vehicle gates; new security screens along existing southern boundary fencing; new 63sq.m single storey external storage container; external open storage areas; vehicular parking and all associated works.

Removal of an existing totem signage pole and installation of a new three-sided, 3.34 metre tall, partially internally illuminated totem sign. Five non-illuminated new fascia signs on the south elevation of Unit 10 and all associated works.

Permission is being sought for works comprising the removal and replacement of two existing underground fuel storage tanks with a new 40,000 litre underground fuel storage tank, the decommissioning of a separate existing 70,000 litre underground fuel storage tank, the installation of a new 11,000 litre Class 1 forecourt separator with coalescing filter; along with all other associated site development, enabling and drainage works; Permission is also sought to retain the existing 24-hour fuel retail card facility and associated overground Adblue fuel tank.

The development will comprise the following: Demolition of existing commercial/industrial buildings on site (c.6,711 sq.m in total). Provision of a mixed use, residential and commercial/employment development (c.49,275 sq.m GFA excluding undercroft) within 4 no. blocks ranging in height from 6 to 10 storeys. The development will provide 436 no. apartments (all with individual private open spaces) consisting of: 2 no. studios, 180 no. 1-beds, 158 no. 2-beds and 96 no. 3-beds. The development will also include: internal residential amenity spaces (c.375.3 sq.m in total); community library (c.352.1 sq.m); creche (c.359.1 sq.m), and 4 no. commercial/employment units (c.1,226.6 sq.m) comprising 2 office/co-working units (c.435.8 sq.m in total), medical centre (with ancillary pharmacy)(c.674.1 sq.m) and café (c.116.7 sq.m). • Block A - 9 to 10 storeys in height and will provide 81 no. residential units. • Block B - 9 to 10 storeys in height and will provide 137 no. residential units • Block C - 8 to 10 storeys in height and will provide 85 no. residential units • Block D - 6 storeys in height and will provide 133 no. residential units. Upgrades to the western side of the Parkmore Estate Road and along the Long Mile Road and Robinhood Road to provide a variety of pedestrian/ cyclist access points to the development and with vehicular access provided from the Estate Road with associated upgrades to the Estate entrance. The development will also include 173 no. car parking spaces within 2 no. undercroft car parks on site and including 12 no. parking spaces (for the commercial units) along the Long Mile Road frontage. Provision of 1,040 cycle parking spaces. Provision of public and communal open spaces, landscaping, boundary treatments, plant areas, waste management areas, and services provision (including ESB substations), and all associated works required to enable this development including connection to the Uisce Eireann network. A Natura Impact Statement (NIS) has been prepared in respect of the proposed development.

The installation of 1No. Skylight and all associated works in the Roof

Installation of roof mounted solar photovoltaic panels to include all ancillary works and services.

Single storey extension to the rear and part side to the existing end of terraced two storey dwelling with a low pitched flat roof; two new windows in the existing gable structure; internal alterations and associated site works.

Removal of Condition No's 2 and 6 of Reg. Ref. SD18A/0289: operational times of the weight and fitness training building to be from 06.00 hours to 22.00 hours Monday to Friday and 8.00 hours to 21.30 hours Saturday and Sunday.

Conversion of existing attic space comprising of modification of existing roof structure; new access stairs and flat roof dormer to the rear.

Demolition of existing extension to rear and construction of single storey extension to side and rear, conversion of existing attic space to non-habitable space with dormer to the rear and window to side of existing dwelling.

Construction of a single storey (staff room) extension to the front (southeast) of the school (including a rooflight); construction of a single storey classroom extension to the rear (northwest) of the school; All associated elevational changes, internal alterations, site, landscaping and ancillary works.

Alterations/additions to previously approved Planning Permission SD21B/0115; demolition of existing single storey extension to side/rear; construction of two storey extension to side with apex roof to front; single storey extension to front at living room; single storey extension to rear and associated site works.

Conversion of existing attic space to non-habitable space with dormer to rear of existing dwelling and associated site works.

Conversion of Attic Space to non-habitable space dormer to rear, 2no Velux to front, door to side, single storey extension to rear and all associated site works

Two storey extension to the side and rear; single storey extension to the rear and all ancillary works necessary to facilitate the development.

Ground floor & rear extensions with flat roof over; first floor side extension with pitched roof over.

Construction of an extension at first floor level to the front (north) elevation providing an additional 2 bedrooms to the property together with a single storey rear extension providing an additional living room area and wc; with all associated removal works to the existing roof, removal of wall sections, removal of existing windows, site development works, drainage and landscaping.

Change of use from motor storage to motor retail showrooms (total area 629sq.m), to include new car showroom and ancillary offices at ground and first floor levels and a motor servicing workshop (total area 483sq.m). New showroom glazing to the northern elevation. Carparking and associated site works. New building signage and a free standing totem sign to the northern boundary and ancillary site development works.

Garden shed with a canopy to be used for sunroom, gym area and storage.

New aluminium composite wall cladding panel system to external walls of existing office building Tam House together with replacement of existing windows with new and re-configuring existing entrance steps

Removal of existing gate piers & portion of low wall forming entrance & exit, to replace with new entrance piers & associated wing walls with inset signage & new entrance gate, together with relocation of existing light pole.

Removal of existing window to form new reception entrance together with new aluminium composite wall cladding panel to existing wall.

A new storage lobby extension to the side/rear of the Eatto building, Unit 220.

Installation of 279 solar PV panels on the roof of the Eatto building.

1) Demolition of existing single story lean-to-roof extension to rear. 2) New single storey flat roof extension to the rear. 3) New dormers to the front and rear of attic. 4) All associated site and auxiliary works.

1) The erection of a 2.3m high black palisade fence to the north, east and part of the west boundaries 2) Remove the foyer and rebuild a new one: a sloping roof with a height not exceeding 3380mm, a width of 3680mm, and a depth of 2630mm 3) Within the company courtyard, approximately 700 square meters of asphalt pavement is laid around the main building 4) Erecting company signage on the main building overall size 0.9m x 18.75m 5) Add 19 No. street lights within the company forecourt 6) Install two electric gates 7) Add metal lines above the roof of the main building 8) Repainting exterior wall paint 9) Replace all doors and windows of the main building, the outer frame color of doors and windows is gun grey 10) On the southeast side of the main building, establish a 4700mm wide and 3100mm high billboard.

Convert existing detached single storey garage to rear of existing dwelling into gym and office along with associated ancillary works.

The removal of the original lean-to porch roof & the addition of a single storey flat roof extension of c. 9 sq.m to the front (South) of the property. All internal & elevation alterations with 3 associated roof lights. The development will also include for the alteration of the original pedestrian access to the side (West) boundary & all associated site development & ancillary works.

9.1m high Gas Cylinder Storage Building with a ground floor area of 519sq.m and elevations finished with grey trapezoidal cladding panels and rendered blockwork, together with ancillary site works.

Planning Permission sought for: Change of use of part first floor from function room to aparthotel and construction of 2 new floors over first floor complete (at second and third floor levels) to provide aparthotel and ancillary accommodation. The total no of aparthotel rooms provided is 22. Existing roof over first floor to be removed complete to facilitate this development. Other works include: (1) Reduction in size of Ground Floor Lounge floor area to provide new separate stairs and lift to serve the aparthotel rooms on the first, new second and new third floors. External entrance doors to the stairs / lift area are the previous entrance doors to the Lounge area. (2) Internal alterations at ground and first floor levels to facilitate this development. (3) Roof garden accessed via the new stairs and lift. (4) Alterations to the existing building elevations finishes and (5) Connection to all services and all ancillary site development works to facilitate this development.

Retention sought for the removal of the ground floor internal courtyard with canopy over as per Planning Ref SD013A/0047; Works to include, external canopy above roof level removed, new storage room created at first floor level; ground floor area incorporated into lounge area; permission for reduction in size of lounge floor area; works to include new entrance doors to Lounge area within building elevation facing car park; new external fire exit door from Lounge area to open space to rear of the building; internal walls forming snug demolished complete;Floor area included within lounge area; kitchen extension within part of previous Lounge area; relocation of Off Licence into previous Lounge area; entrance doors to Off Licence are previous entrance doors to lounge area; works to include new window to Off Licence within building elevation facing car park; change of use of previous Off Licence to takeaway; internal layout changes to lounge area public toilets; remove internal doors between Lounge area and entrance.

(i) change of use of existing premises from car dealership to warehousing/distribution facility with associated internal alterations to facilitate use; (ii) provision of new fascia signage on the front/north-west elevation; and (iii) all associated ancillary works necessary to facilitate the development.

(i) partial change of use of existing building, which comprises a warehouse with ancillary offices and archive storage, at ground floor level only to provide a product display showroom (66sq.m), 2 no. service repair rooms (104sq.m total) and the reconfiguration of the ancillary office space with associated internal alterations to facilitate; (ii) reconfiguration of internal layout at first floor level with no change to ancillary office space at this level; (iii) provision of new fascia signage on the front/north-west elevation; and (iv) all associated ancillary works necessary to facilitate the development. The revised building will provide 528sq.m of warehouse space (reduced from 745sq.m) and 366sq.m of ancillary office space (increased from 319sq.m).

Front porch and two storey extension to the side and rear of existing dwelling.

(i) A Single-storey extension to the existing kitchen annex and (ii) A flat roof attic dormer extension. All works are to the rear of the house.

Demolition of existing light industrial building (formerly known as Acoustic House) totalling 1,742sq.m; provision of new hardstanding areas and use of the former Acoustic House site as part of the adjacent Frank Keane Motors site to provide for used vehicle display; compound parking; customer parking; service parking; demo parking; construction of a 6 bay car wash and valet facility (244sq.m) located at the western boundary of the site; all associated boundary treatments and all associated site and development works on a site (1.3889ha) at Frank Keane Motors and adjacent premises formerly known as Acoustic House (vacant).

Extension of 352sqm to the existing car workshop located to the rear of the existing car showroom to provide additional car servicing, valet and wash bays. Reconfiguration of the adjoining external compound car storage area, including the removal of 16 storage car parking spaces to accommodate the proposed extension, revised and extended building elevations and all associated site development works.

Retention permission for new sectional door; 5m high by 3.9m wide; to the south-east elevation of an existing building.

Retention of erection of fence and gate enclosing lands with vehicular access to the Long Mile Road.

Permission for 3 years for a temporary cafe/retail unit on a vacant plot of land on Long Mile Road. The development will consist of one converted bus two storeys in height. Related works include new paving and the construction of a new fence and gates.

Retention of constructed fence and boundaries and the relocation of existing access gate to revised location and proposed use of space as an allotment.

Retention of constructed fence and boundaries and the relocation of existing access gate.

Erection of a wall, 28.4 metres long x 2.4 metres high and a side gate along the eastern site boundary.

1. Construction of a two storey side extension with a gable ended roof to consist of a living room, WC and utility at ground floor and master bedroom with a walk-in wardrobe and a bathroom on the first floor. 2. Modifications to the existing side boundary wall for provision of a new pedestrian access exiting onto Kingswood Heights Grove. 3. Modifications to the existing front and side walls boundary treatments for provision of a new vehicular access including dished public footpath exiting on The Grove, Kingswood Heights. General remodel and partial upgrade of the existing dwelling to suit the proposed layouts. 5. All drainage, structural and associated site works to be implemented.

Increased width drop kerb at the edge of the public road, in front of the house, for additional vehicular access to the off-road parking area in the front garden of the house.

(i) Conversion of existing attic to non habitable storage use; (ii) provision of dormer window to the rear and all associated site works.

Demolition of existing single storey garage wing; construction of a new house, No.1A adjoining the existing house with the addition of a rear extension and internal layout changes to No.1, along with an additional front driveway entrance and all associated site works.

1) the demolition of the existing single storey side garage and the construction of a single storey front, side & rear extension to the existing two storey detached dwelling, ancillary alterations to all elevations, demolition of existing chimneys and all associated site works, 2) the wrapping of the existing two storey dwelling with external insulation and ancillary alterations to all elevations 3) Widening of the existing vehicular entrance and all associated site works and 4) the increasing in height of a portion of the existing side boundary wall to 2.9m as measured from public footpath side and all associated site works

Demolition of existing 3.3sq.m rear kitchen lean-too and construction of new 12sq.m ground floor extension with flat roof; construction of new 4.1sq.m first floor rear extension with pitched roof; internal alterations.

The creation of a 62sq.m ground floor industrial unit to be known as Unit 2B2 that previously formed part of industrial unit 2B2A.