Proposed two storey dwelling with single storey annex to side, detached garage, formation of new entrance, wastewater treatment system, polishing filter area and all ancillary site works

Construction of a two storey type dwelling house, detached garage, entrance boundary fence/wall, onsite suitable treatment system with percolation area & ancillary site works

Of an existing attic conversion with dormer and velux windows that service an existing dwelling house together with also seeking retention of existing detached domestic garage and all ancillary works

Of 19/40 - retention of changes to roof pitch, window design, changes to window and door openings, omission of chimney on existing dwelling and all associated services and retention of domestic garage and planning permission to convert attached garage to ensuite bedroom and alternation to the front elevation of the dwelling

Proposed construction of a two-storey extension to the rear and side of an existing two-storey dwelling house along with the construction of a first-floor extension over the existing front porch to provide additional landing space at first-floor level together with all associated site development works whereby the red boundaries have now been increased so as to incorporate existing agricultural buildings and domestic storage sheds for which retention permission is now being sought

(A) Retention of existing foundations to service a proposed storey and a half type dwelling which are constructed in approximately the same location as a cottage type dwelling house which was recently demolished. (B) The proposed construction of a proposed storey and a half type dwelling on top of the foundations described above. (C) Retention and completion of existing recently renovated garage type structure. (D) Connection of the proposed storey and a half type dwelling into the proposed onsite sewerage treatment system with polishing filter which was previously granted full planning permission under planning reference number PL21/175 and all associated ancillary site works

(A) retention of existing foundations to service a proposed storey and a half type dwelling which are constructed in approximately the same location as a cottage type dwelling house which was recently demolished. (B) the proposed construction of a proposed storey and a half type dwelling on top of the foundations described above. (C) retention and completion of existing recently renovated garage type structure. (D) connection of the proposed storey and a half type dwelling into the proposed onsite sewerage treatment system with polishing filter which was previously granted full planning permission under planning reference number PL21/175 and all associated ancillary site works

Proposed installation of a proprietary wastewater treatment system with suitable polishing filter to service existing cottage type dwelling house and all ancillary works

Of the following: A) The installation of an onsite sewerage treatment system with polishing filter to service an existing dwelling house B) the erection of boundary fences and all ancillary works

And retention of the following: 1. Remotely located carpark comprised of 160 no. carparking spaces. 2. Circulation roads and footpaths to the southwest of the existing facility. 3. Remotely located two-storey temporary office accommodation to the west of the existing facility. 4. Retention of a single-storey temporary lab accommodation to the southwest of the existing facility. 5. The provision of a two storey Lab, production and office expansion to the north of the existing facility. 6. The provision of a two-storey packaging expansion to the northeast of the existing facility. 7. The provision of a double height warehouse with single storey office accommodation to the northeast of the facility and including level truck dock and circulation roads. 8. The provision of a salt storage tank located to the northeast of the existing facility. 9. Demolition of existing two storey temporary accommodation to the north of the facility. 10. Demolition of an existing house (c.339.88 m2) and outbuildings (c.133.14 m2) to the south of the existing facility. 11. All other associated site services necessary to facilitate the proposed development

Construct a storey and a half type dwelling house with single storey elements, detached domestic garage, new entrance, bored well, boundary walls, piers and fencing, proprietary wastewater treatment unit and percolation area and all ancillary site works

(a) an extension to an existing carpark as constructed. (b) a smoking shelter. Permission is sought for (a) the construction of fencing to the front (western) boundary of the existing site (b) the construction of a new building sign (c) along with all other associated site works

Of 4 number small extensions to the existing nursing home, two to the south, one to the south - east and one to an internal courtyard of the existing nursing home. Retention permission is also being sought for a shipping container positioned to the south of the existing building and being used as a laundry. Retention permission is also sought for revisions to the internal layout of three further small areas of the existing nursing home, retention permission is also sought for all site development works associated with these developments.

Of PL15/50 for the construction of a first floor extension comprising of 6 number en-suite bedrooms to the south western wing and all ancillary site works COVID 19

The proposed construction of an extension to existing bungalow type dwelling house together with the proposed upgrade of existing wastewater treatment system in accordance with EPA code of practice 2021 to service the existing dwelling house and all ancillary works

The proposed construction of an extension to existing bungalow type dwelling house together with the proposed upgrade of existing wastewater treatment system in accordance with EPA code of practice 2021 to service the existing dwelling house and all ancillary works

The proposed construction of a single storey type dwelling house, entrance, boundary fence/wall, suitable onsite treatment system with polishing filter and all ancillary site works

Proposed construction of an extension to an existing engineering workshop unit previously granted full planning permission under planning reference number PL19/251, which will be used in conjunction with the existing engineering workshop for stainless steel manufacturing & storage purposes and all ancillary site works

Proposed construction of light industrial unit & food production facility with ancillary office space, signage, provision of car parking, entrances, boundary wall/fence, connection to public services and all associated ancillary site works

Proposed construction of an extension to existing industrial unit previously granted full planning permission under planning reference number PL04/1144 and all ancillary works

The construction of fencing to the front (southern) boundary of the existing site, along with all other associated site works

(1) construction of a new metal cladded building for light manufacturing and storage, and (2) all ancillary site services

(1) construction of a new timber cladded welfare building containing lunch room, locker rooms and toilet facilities, (2) new proprietary effluent treatment system and percolation area, and (3) all ancillary site services

To erect a 24m high lattice telecommunications support structure together with antennas, dishes and ancillary works all enclosed in security fencing and remove the existing 15m high monopole at the eir Exchange

Proposed construction of a single storey extension to the rear of an existing storey and a half type dwelling house, construction of detached garage, proposed replacement of an existing septic tank system with an onsite sewerage system with polishing filter and all ancillary works

Of an existing telecommunications support structure (previously granted permission by Longford County Council under Pl. Ref. 07/1049) together with antennas, dishes, equipment cabinets, fencing and all associated site development works. The development will continue to provide high speed wireless broadband and data services

A ten-year permission for development on lands measuring 17.28ha. The proposed development will consist of the following: (i) Demolition of a single-storey derelict shed structure (c. 93 sqm GFA) to facilitate the turbine haul route (ii) Construction of two E175 EP5 wind energy converters, each with an electrical rating of 7MW, an overall ground-to-blade tip height of 199.9 metres, a rotor blade diameter of 175 metres, hub height of 112.4 metres, associated foundations and hard-standing areas; (iii) Construction of an 800m permanent internal site access road which will run from the L50462 to the wind energy converter hardstanding areas including a 9.1m clear span bridge crossing a local stream; (iv) Construction of 1 No. meteorological mast with a height of 32 metres, associated foundation and hardstanding area; (v) Construction of 1 No. 20kV Substation Compound comprising 2 No. Modular Buildings each measuring 13.5 sqm in area and 3.5m in height, a Battery Energy Storage System (BESS) comprising 3 storage modules on reinforced concrete plinths, with a height of 2.8 metres and associated electrical works, foundation and hardstanding area; (vi) Temporary alterations to the L5046 and L50462 public roads and temporary access roads to facilitate the turbine component haul route, including temporary widening of sections of the L5046 and L50462. (vii) Installation of underground collector circuit and communications cabling in underground cable trenches, from the proposed wind energy converter to the proposed on-site substation; (viii) All associated and ancillary site development, excavation, construction, and reinstatement works, including the provision of a temporary construction compound, site drainage, spoil management, fencing, lighting, hedge and tree trimming and cutting and operational maintenance; (ix) This application is seeking a 35- year operational life from the date of commissioning of the entire wind farm. An Environmental Impact Assessment Report (EIAR) has been prepared in respect of the proposed development

The construction of a new, 3 Storey Manufacturing Facility, Warehouse and carpark, along with ancillary sheds, totalling 9,545 sqm, consisting of: i. 3No. Clean Rooms, Packaging Room, Warehouse, Tool Room, Quality Lab, Offices and ancillary rooms to the above. ii. 9No. External Storage Silos, 11m high, with an approximate cubic capacity of 40-45 metric tons. Containing Polypropylene, semi-rigid material used in the manufacturing process. iii. 4No. Loading Bays. iv. Screened external plant area with Air Handling Units to roof. v. On site structures for Electrical requirements, Bins & Pallet Stores. vi. Demolition of 1,755sqm of existing Buildings & Sheds. vii. Reduction in width of the existing site entrance, the addition of a truck-only exit to the east of the existing site entrance and a proposed new road and pathways from The Laurels Road viii. A controlled pedestrian crossing on the N63 ix. Together with associated signage and all other ancillary and associated site works

Change of design and location on site from that granted under planning permission ref:23/92 to erect an extension to our industrial factory unit, and all associated site works

To erect an extension to our industrial factory unit and all associated works

To erect 1039.00 m2 or 184.20 kWp of photovoltaic panels on the roof of our existing buildings, in our factory with all associated site works

(A) the proposed construction of an extension to the northern & eastern facades of existing unit so as to extend the existing office space; (B) the proposed construction of an extension to the southern & western facades of existing unit so as to extend the existing warehouse area, proposed signage erection and all ancillary works

To retain, as constructed: garage/store on site and associated site works. Alteration of front elevation of dwelling to include installation of external door with fanlights. Conversion of attached garage to living accommodation

Internal and external alterations to an existing warehouse building to include; a mezzanine floor (428m2), new fire escape doors, the closing up of two roller shutter doors, new pedestrian entrance to warehouse, signage (38m2), alterations to existing site entrance, new proposed boundary metal fencing, removal of existing boundary hedge and all ancillary site works

Of domestic shed 11.2m x 6.1m (68.32 Sq.m)

The proposed construction of an extension to the rear of existing food processing facility for use as a dry storage unit and all ancillary works

An extension to an industrial building (previously granted under Planning Ref 18/88) consisting of the following: permission is sought for the construction of: (I) A new industrial warehouse building (2098m2) (II) A relocated depressed loading dock and associated ramp (previously granted under planning ref 18/88) (III) Additional carparking areas for this development (IV) Signage on the building (V) All other ancillary and associated site works

The following development: Internal works: a) Conversion of part of the existing warehouse granted under PL21/29 to manufacturing area (808m²). Other works: b) The construction of an extension consisting of manufacturing areas (1060m²) and warehouse areas (1560m²). c) Construction of new two-storey quality lab (237m²) to the south east corner of the main entrance block. d) Relocation of 3 depressed loading docks positions with the provision of 1 new additional dock. e) 20 number storage silos 3m diameter x 11m high. f) Exit ramp for trucks leaving site via local road that connects to the N63 Ballinalee road. g) Demolition of an existing storage shed (79m²) h) Together with associated signage and all other ancillary and associated site works

To construct an extension to the existing school. This extension measuring 440m2 is located to the north of the existing school and comprises of 4 x no. 80m2 classrooms, 1 x 10.5m2 WC, 1 x 12m2 staff toilets & circulation areas, connection to the existing school and consequent internal modifications, connections to existing on-site services and ancillary site works

To modify previously approved planning permission (PL21/93). These modifications consist of the relocation of 2xno. pre-fabricated classrooms, currently on-site, as well as the installation of a 3rd prefabricated classroom and the carrying out of all necessary ancillary site works and connections

To construct a 3G Astro Turf pitch (60m x 30m) with ancillary metal cage surround and netting, to the rear of the existing school building, new proposed footpaths and all ancillary site works

Of PL17/104 - to install a 50m2 pre-fabricated unit to accommodate childcare facilities, with connections to existing on-site services and the carrying out of ancillary site works

Of revised location for 2 no. flour silos from that granted under previous planning reference ref 17/175. Permission for retention of water storage tank and gas storage tank within the yard to the north west corner of the site. Planning permission for revisions to the site entrance at the existing Panelto Foods building J(Building No. 1) to create a separate HGV and car/van access including associated traffic barriers and security gates. Planning permission for new vehicular and pedestrian sercurity gates to the existing site entrance to the former Enterprise Centre (Building No. 2). Planning permission for new security fencing to the external perimeter and internally within the site incorporating turnstile. Planning permission for sloped vehicular access route to rear of Buildings 1 & 2. Planning permission for removal of existing portacabin and replacement with new single storey modular office building linked to the east side of Building No. 1. Planning Permission for external signage (COVID 19b)

Revised single storey modular office building from previously granted under planning ref 20/77 linked to the east side of existing building. Permission for new single storey modular building providing welfare facilities linked to south side of existing building and all associated site works

Retention and completion of alterations to elevations and roofline of dwelling approved under permission 15/214 at Knockahaw, Longford. The alterations will include extending the front bay windows into the first floor elevations and adjustments to the approved roofline

The following: the construction of a 95 car-parking spaces on lands to the south of our existing manufacturing facility, the development will include the provision of a vehicular access point onto the local access road that connects to N63 Ballinalee road, together with all associated site works

Changes to the previous planning (ref: 2460107), the proposed development includes changes to the car parking layout, the addition of a new truck entrance, and the installation of 16 silos (3m diameter x 11m high) with an overhead pipe bridge spanning the local access road with a clearance height of 5.03m. The proposed silos and ducting will supply raw material to the neighbouring Technimark factory, along with all related site works

Development of 93 dwellings comprising 2 no. 2-storey 3-bed detached houses, 44 no. 3-storey 3-bed semi-detached houses, 28 no. 3-storey 3-bed terraced houses, 19 no. 2-storey 2-bed terraced houses, 25 no. of which will be accessed off the existing Ard Michael Road and 68 no. of which will be accessed off Oaklands Avenue. The development will include cycle paths, landscaped open space, and all associated site works

New canopy over existing intake storage/delivery door, extension of existing access link corridor and retention of single storey washroom/store to side, relevant changes to elevations and include all associated ancillary site works and services

To construct a new bungalow dwelling, waste water treatment system, storm water soakaways, and all associated site works. Retention permission is also sought for existing boundary walls, vehicular entrance, partially constructed shed/domestic laundry and all associated site works