Provision of a warehouse with ancillary office and staff facilities and associated development; The warehouse will have a maximum height of 13.776 metres with a gross floor area of 1,526sq.m including a warehouse area (1,391sq.m), ancillary staff facilities (113sq.m) and ancillary office area (22sq.m); A vehicular entrance/exit via Brownsbarn Drive; a pedestrian access via Brownsbarn Drive; 7 ancillary car parking spaces; bicycle parking; level access goods doors; hard and soft landscaping; lighting; boundary treatments; plant; and all associated site development works above and below ground on lands generally bounded to the north by Browns barn Drive, to the south by a ramp to the Naas Road (N7)1 to the east by a Car Sales Showroom and to the west by a Petrol Filling Station.

Erect 3 company logo advertising signages, (Units 1 & 2 currently under construction as per previously granted planning permissions reg. ref. SD21A/0162 & SD22A/0313); The signage will consist of Signage No. 1 & No. 2, company logo; non illuminated; area of 56sq.m each, located 12.31m above ground floor level at the front (eastern) elevation and side (southern) elevation; Signage No. 3, non-illuminated powder coated aluminium totem 1.2m wide x 3.1m height x 0.1m deep, located to the eastern side of the ancillary car park entrance; On lands bounded to the south by the N7 Naas Road, to the north and west by the National Distribution Centre and to the east by Brownsbarn Drive and the Royal Garter Stables, a Protected Structure (RPS Ref.261).

Alterations to an existing planning permission Reg. Ref. SD21A/0162 for a warehouse development of 2 units (Unit 1 & Unit 2) at the 4.04ha site comprising of reduction of 237sq.m of warehouse floor area on the ground floor due to, change of use of 63sq.m of warehouse floor area to office floor area, change of use of 91sq.m of warehouse floor to staff facilities floor area on the ground floor plan, and the remainder due to the addition of a 2.4m high perimeter blockwork wall in the warehouse area; Change of use of 14sq.m of staff facilities floor area to office floor area at the ancillary office ground floor plan; Change of use of 14sq.m of office floor area to staff facilities floor area over ist & 2nd floor plan; Reduction of 28sq.m of office over 1st and 2nd floor plan to facilitate structural alignment; Minor internal alterations to the ancillary staff facilities/office layouts with no area alterations; Elevational changes, omission of 5 dock levellers & associated canopy and addition of 1 fire escape door to the building's southern elevation; Addition of 2 fire escape doors to the building's northern elevation; Alterations to Unit 2 are as follows, omission of warehouse office/staff facilities block at the south-east & north-west corner of the warehouse resulting in, change of use of 40sq.m of office floor area to warehouse floor area and change of use of 76sq.m of staff facilities floor area to warehouse floor area on the ground floor; Addition of a 2.4m high perimeter blockwork wall internally within the warehouse area, resulting in a warehouse floor area reduction of 63sq.m; Alteration to the ancillary office/staff facilities block resulting in, a reduction of 101sq.m of office floor area and addition of llm2 of staff Facilities floor area on ground floor plan; Reduction of 104sq.m of office floor area & 52sq.m of staff facilities floor area over 1st & 2nd floor plan; Elevational changes, a reduction of 2 level doors and addition of 6 dock leveller doors & associated canopy to the building's north-eastern elevation; Associated site plan and drainage adjustments.

Construction of 2 warehouses with ancillary office and staff facilities and associated development; Unit 1 will have a maximum height of 16.35 metres with a gross floor area of 8,156sq.m including a warehouse area (7,397sq.m), ancillary office areas (362sq.m) and staff facilities (397sq.m); Unit 2 will have a maximum height of 15.35 metres with a gross floor area of 5,990sq.m including a warehouse area (5,031sq.m), ancillary office areas (536sq.m) and staff facilities (423sq.m); vehicular access/egress routes to the subject site via the existing roundabout and access road; alteration to the existing access arrangements to the subject lands to facilitate safe traffic flow to/from the proposed facilities; pedestrian access; 109 car parking spaces; bicycle parking; HGV Parking; HGV yards; level access goods doors; dock levellers; access gates; signage; hard and soft landscaping; lighting; boundary treatments; ESB substation; sprinkler tanks; pump houses; and all associated site development works above and below ground on lands bounded to the south by the N7 Naas Road, to the north and west by the National Distribution Centre and to the east by Brownsbarn Drive and the Royal Garter Stables, a Protected Structure (RPS Ref. 261).

Planning permission is sought for 1) the retention, conservation, restoration and change of use of the existing 344 sq.m two storey former barn building to a 2 storey restaurant of circa 311 sq.m. 2) ancillary commercial kitchen, restaurant seating area, toilets, ancillary office & staff rooms 3) ancillary alterations to all elevations 4) use of existing internal court yard area as a dining area, with external pizza oven, and restaurant service area accommodation a freezer container unit & bin area. 5) proposed vehicular / service entrance in existing court yard wall from existing car park area 6) associated signage and 7) all ancillary site works.

Planning Permission is sought for 1) the retention, conservation, restoration and change of use of 113sq.m ground floor portion of the existing 344sq.m two storey former barn building to restaurant dining & restaurant toilets 2) 4 no. pre-fabricated container type structures to be located in the court yard area which will accommodate Restaurant Kitchens, toilets & staff room 3) 1 no. 59sq.m, mostly glazed, prefabricated enclosed, pergola type structure to be located in the court yard area, which will accommodate restaurant seating & restaurant reception area 4) use of remaining existing internal court yard area as an outdoor cooking area with external pizza oven, restaurant service area and bin storage area 5) proposed vehicular/ service entrance in existing court yard wall from existing car park area 6) associated signage and 7) ancillary alterations to existing elevations and all ancillary site works.

Provision of a warehouse with ancillary office and staff facilities and associated development. The warehouse will have a maximum height of 15.6 metres with a gross floor area of 4,136 sq. m including a warehouse area (3,713 sq. m) ancillary staff facilities (220 sq. m) and ancillary office area (203 sq. m). development will also include: a vehicular entrance/exit via Brownsbarn Drive; a pedestrian access via Brownsbarn Drive; 25 No. ancillary car parking spaces; bicycle parking; ancillary HGV yard; level access goods doors; dock levellers; access gates; hard and soft landscaping; lighting; boundary treatments; and all associated site development works above and below ground.

Erect 1 company logo advertising sign at Unit 2 (Units 1 & 2 currently under construction as per previously granted under Ref. SD21A/0162 & SD22A/0313); The signage will consist of raised backlit company logo lettering; Total area of 12sq.m located 11.43m above ground floor level on the front (southern) elevation.

Development on a site of c7.29 ha located on lands east of Barney's Lane, Brownsbarn, Baldonnell, Co. Dublin. The proposed development is comprised of change of use of the lands from vehicle distribution centre car park to a logistics warehouse campus. The proposed development includes 4 no. new logistics / warehouse units as follows; 1. Unit 1 - GFA c. 5,936 sq m (warehouse area c. 5,248 sq m, with c. 688 sq m ancillary office and staff facility spaces); 2. Unit 2 - GFA c. 3,632 sqm (warehouse area c. 3181 sq m, with c. 451 sq m ancillary office and staff facility spaces); 3. Unit 3 - GFA c. 6,389 sqm (warehouse area c. 5658 sq m, with c. 730 sq m ancillary office and staff facility spaces); 4. Unit 4 - GFA c. 4,089 sqm (warehouse area c. 3,591 sq m, with c. 498 sq m ancillary office and staff facility spaces); Access to the site will be provided via a new vehicular, pedestrian and cycle entrance via the roundabout at Brownsbarn Drive, to the south of the site, with associated modifications proposed to the roundabout to facilitate access. Each proposed block includes associated set down, turning areas, loading docks, delivery and marshalling yards; 164 no. car, and 106 no. cycle parking spaces; plant and tank areas. The development also includes all internal roads, cyclepaths and footpaths, all site development works and changes in level; site clearance works including the partial removal of hedgerows; hard and soft landscaping; signage; boundary treatments, ducting, cabling and pipework; public and security lighting; CCTV; 2 no. ESB Substations; SUDs including provision of pons; PV Panels; and all other ancillary works.

Installation of two internally illuminated external building mounted signs to the existing west and east facades.

Installation of a new access door and canopy to the south east elevation at ground floor level, the replacement of 4 spandrel panels with louvred vents below first floor level slab, and a new air handling unit with louvred enclosure and access doors at roof level.

Installation of roof-mounted solar photovoltaic panels on the roofs of two existing buildings including all ancillary works and services.

Provision of a warehouse with ancillary office and staff facilities and associated development. The main structure will have a maximum height of approximately 19.1 metres with a gross floor area of 9,158 sq.m, including warehouse area (7,971 sq.m), ancillary office area (701 sq.m) and ancillary staff facilities (486 sq.m). The development will also include: 2 No. vehicular entrances to the site from Bianconi Avenue, including 1 No. for HGVs; a pedestrian entrance from the Citywest Road and Bianconi Avenue; HGV parking and yard; 45 No. car parking spaces, including 3 No. accessible parking spaces; cycle parking; level access goods doors; dock levellers; access gates; lighting; hard and soft landscaping; detention basin; boundary treatments; ESB substation, switch room and site lighting and security room; plant; and all associated site development works above and below ground.

Construction of two 4 storey office buildings, with a total floor area of 13,250sq.m. The proposed development also provides for plant rooms at roof level (125sq.m each), all associated site development works, landscaping, basement and surface car parking, bike sheds, 2 service buildings (70sq.m each), and 2 new vehicular entrances off Bianconi Avenue, all on a site area of 2.2ha.

Up to 268kWp (c. 1227m2) of Roof Mounted Solar PV Panels and all associated works on our premises.

Provision of a 3 storey office development with a total gross floor area of c. 2,992sq.m (excluding the c. 205sq.m plant room at roof level); Provision of 51 car parking spaces (including 2 accessible spaces and 27 EV spaces with charging points), accessed via the existing vehicular entrance from Lake Drive; Provision of 2 pedestrian access points to the north and east of the site, bicycle parking facilities, an ESB substation (c. 22sq.m), waste storage facilities (c. 20sq.m); signage, soft and hard landscaping works, PV panels, external lighting, piped infrastructure and ducting, SuDS drainage and all ancillary site excavation and development works above and below ground.

Construction of three 3 storey office buildings, with a total floor area of approx. 16,732sq.m. The proposed development also provides for plant rooms at roof level, all associated site development works, landscaping, café (57sq.m), bicycle parking, car parking at surface level, basement level & a two level podium car park in the north-east corner of the site incorporating shower & changing facilities (152sq.m), ESB substations & service plant, and bin storage, all on a site area of 3.74ha. The effect of the proposed development will be a modification to part of an extant permission under Reg.Ref. SD06A/0737 & SD06A/0737/EP. The proposed development also provides for 2 vehicular access points off Kingswood Road ( Old Naas Road) and 2 vehicular access points of Kingswood Avenue.

Retention permission for hard stand area and for permission to complete works, incorporating the setting out of lorry trailer park, drainage network, attenuation tank together with Asphalt Concrete finish, and all associated site works.

Installation of up to 100kW (540sq.m) of roof mounted solar PV panels and all associated works.

Change of use of 6,299sq.m of the existing interlinked complex of buildings of 18,984sq.m from a mix of ancillary warehouse, packaging, logistics and research and development uses within Blocks E, G and K to an independent office based industry use that would function independently to the remaining Xilinx facility and could be sub-let and subdivided. An area of existing office space of 1,591sq.m at the second floor within Block G will also be sub-let creating an overall independent office based industry use of 7,890sq.m. The development will include the removal of the mezzanine level above the ground floor of Block G (201sq.m) that will reduce total floor area of facility to 18,783sq.m. The development will also consist of the amendment of Condition no. 6 of S94A/0344 and S99A/0908 so that the new independent office based industry use of 7,890sq.m can be sub-let and subdivided and so that the existing office space (10,893sq.m) is not integral or ancillary to the non office uses that are subject of this change of use application. Minor elevation changed are also proposed, including a new entrance within the north elevation of Block E, and additional glazing to the north, west and south elevation of Block G. The remaining Xilinx facility (10,893sq.m) will continue as per its permitted uses. The new office based industry use will be served by the reconfigured 197 car parking spaces of the 568 permitted car parking spaces serving the site with vehicular access via the existing secondary entrance off Bianconi Avenue. 371 spaces will continue to serve the remaining Xilinx facility. Retention permission is also sought for the generator compound (391sq.m) consisting of three generators along with three transformers and ancillary 3 diesel tanks and perimeter treatment on a permanent basis on the southern perimter of the site with Orchard Avenue. The development will include all ancillary landscaping and site development works.

Change of use of 3,397sqm of the existing interlinked complex of buildings of 18,984sqm from a mix of ancillary warehouse, packaging, logistics and research and development uses within part of the ground floor of Block E (2,952sqm) and part of the ground floor of Block G (445sqm) to office based industry that incorporates research and development, ancillary office, gym and other facilities related to the operation of the overall development. The development will include internal works only to facilitate the change of use.

Retention of the generator compound (391sq.m) consisting of three generators along with three transformers and ancillary 3 diesel tanks and perimeter treatment on a permanent basis on the southern perimeter of the site with Orchard Avenue; The development also consists of the retention of 3 signs (10.94sq.m) as follows: retention of 1 sign (0.57sq.m) on plinth at the corner of Bianconi Avenue and the N82/Citywest Road; retention of 1 sign (4.58sq.m) on the eastern elevation of Block D facing the N82/Citywest Road and retention of 1 sign (5.79sq.m) on the northern elevation of Block M facing Bianconi Avenue. The development will include retention of all revisions to the permitted landscaping and site development works required.

The development will consist of erection of back-lit signage to the west elevation of Unit 3018.

Installation of two internally illuminated external building mounted signs to the existing south-west and north-west facades.

The development will consist of: The change of use of the existing warehouse to a clean manufacturing area - light industrial. Alterations to the existing south elevation, including the installation of new signage displaying the company name and the removal of the existing balcony. The provision of new double access doors and a new external pathway to facilitate access to the building; including all associated site and ancillary works.

New main entrance door and canopy, installation of external signage and removal of existing draught lobby to south-west facade, installation of 5no. glazed doors and 4no. louvred panels to existing glazed facades, provision of 198sqm of photovoltaic panels below parapet level of flat roof, 2no. free-standing signage totems, 8no. new Electric Vehicle charging points, 2no. bicycle parking shelters and miscellaneous landscaping works.

Alterations to existing east and west elevations to include 10 external vents; installation of new photovoltaic solar panels to existing roof; provision of 10 bicycle parking spaces; 2 EV chargers; 1 external condenser and all associated site works.

Partial change of use from warehouse/storage to office use on ground and first floor level consisting of offices, canteen and toilet facilities, internal staircases, and associated facilities; 1 dock leveller located on the south west elevation to existing loading bay; new external windows & doors for office spaces to the existing south east south west and north west elevations with formation of entrance to office space to existing south east elevation; new carparking/hardstanding to provide 27 car parking spaces inclusive of 2 disabled spaces; external ramped/stepped to approach to office entrance to south west elevation; alterations to existing perimeters gabion walls to the south west of existing site and realignment of kerbing and shrub line to south west elevation; car parking external LED lighting provided by way of lamp standards to car park; alterations to existing surface water drainage and associated site works.

The installation of an external Air Handling Unit, to be housed in a new timber and metal clad enclosure adjacent to Unit 3030, Lake Drive and the installation of a Heat Pump Unit to be installed within an existing plant enclosure, with additional cladding proposed, in the north east corner of the carpark of Unit 3030 and all ancillary engineering and landscape works necessary to facilitate the development at Unit 3030 Lake Drive, Browns barn, Dublin 24 D24 KX6Y. (Previous planning reference SD25A/0185W )

The development will consist of alterations to the existing east elevation to include the provision of a new external fire escape stairs to facilitate the internal subdivision of the existing office building, together with all associated site and ancillary works.

Attic conversion with hip to gable roof and dormer to rear roof to accommodate stairs to allow access to attic as non-habitable storage space with roof windows to front all with associated ancillary works.

Demolition of 2 sheds and 2 compounds and works to the existing building comprising of the construction/installation of 5 external dock levellers with roller shutter doors with associated revisions to the existing western elevation to accommodate same; associated site levels and drainage layout adjustments to accommodate the development; expansion of existing concrete yard and all associated engineering and site works necessary to facilitate the development.

Change of use from existing short term tourist accommodation units to full apartment type living accommodation units consisting of 10 two bed ground floor units and 10 two bed duplex type units at first floor level (20 units in total); also, include small elevational changes to facilitate balcony extensions at first floor level and new balcony areas at ground floor level in order to accommodate private amenity space for the individual units; omit Planning Condition 6 of Planning Ref. S01A/0051 (which links the use of units to the City West Hotel); new bicycle shelter and all associated site development works, parking, landscaping and boundary treatment works.

Retention permission for installation of 2 no. illuminated signs to the existing building. These signs consist of the installation of 1no. sign to the front (west) elevation and 1no. sign to the (north) elevation and all associated site works.

Change of use of approved ground floor warehouse/factory area (455sq.m) to a disaster recovery/business continuity centre and change of use of approved ancillary offices at ground and first floor (459sq.m) to office use; extension at first floor area (81sq.m) to provide staff toilets and server room; external generator plant enclosure and all associated ancillary works necessary to facilitate the development.

Proposed 205sq.m of ancillary office & 242sq.m of ancillary staff facilities extension at the second floor level to the existing ancillary office located to the north-western elevations side of existing warehouse; Building elevations remain as existing due to second floor glazing being provided in previously granted planning permissions; Addition of 4 covered cycle parking to the existing covered cycle parking to facilitate the additional office / staff facilities area.

Alterations to an existing granted planning application, Reg. Ref. SD20A/0204, for a warehousing development consisting of provision of a new separate ancillary workshop building to the site's western corner measuring 278sq.m, overall height 9.7m; provision of new extended glazed entrance of ancillary office at ground floor (28sq.m, 5.9m high) to the front north-western elevation and new emergency exit route at first floor (43sq.m) exiting to side north-eastern elevation by new external stairs. Additional floor area provided 71sq.m; the alterations above result in total floor area increase by 349sq.m (from 2,222sq.m to 2,571sq.m); provision of 3 internally lit building mounted business logo signs, 12.25sq.m each (12.7m above ground level) to the front (north-western), side (north-eastern) and rear (south-eastern) elevations; provision of 3 10m high flagpoles to the north of the site, with a distance of approx. 31m from the warehouse and new extended office entrance; provision of 288sq.m solar panels to the roof of the warehouse; provision of a new recessed access/egress, rearrangement of truck wash area and refuel area and partial revision of the north-western site's boundary fence type C; elevation and site plan revisions associated with entrance porch, signage and fire exit stairs; and associated drainage adjustments due to the inclusion of the above alterations; all other details will remain as per the granted application Reg. Ref. SD20A/0204.

Relocation and resizing of previously granted ancillary workshop within the facility towards the south-east, now measuring 186sq.m overall height 7.2m (Previously granted at 300sq.m and 9.7m high); Relocation of pedestrian entrance gate by 9m on the northern site boundary due to design change to accommodate site levels and access gradients; Relocated HGV wash area adjacent to repositioned workshop building and associated drainage adjustments due to relocating the workshop and HGV wash bay; 1m high gabion retaining walls to the site's southern boundary (rear) to facilitate level differences between the subject site and the neighbouring site; Provision of an on-site Well Pumphouse (4.8sq.m and 2.7m high); Provision of associated above ground Water Tank (10m x 3m x 3m, 90m3); The overall site area remains as per the previous application at 0.98ha and there is no alteration to site landscaping.

Provision of a warehouse unit with ancillary office and staff facilities and associated development. The building will have a maximum height of 15.8m with a gross floor area of 2,222sq.m including a warehouse area (1,530sq.m), staff facilities (302sq.m) and ancillary office area (390sq.m) and will also include the provision of 1 new vehicular access/egress point along the north-west boundary of the subject site onto Clonlara Road; pedestrian access; 22 ancillary car parking spaces; bicycle parking; HGV marshalling yard with 2 loading bays; level access goods doors; dock levellers; access gate; signage; hard and soft landscaping; lighting; boundary treatments and associated site development works above and below ground.

Planning Permission for the erection of a fully serviced detached dwelling house. All with associated and ancillary site works

1 x 50 KWp solar photovoltaic (PV) system on main office building. There will be a total of 156 PV panels on the main office roof and will occupy an area of 257sq.m.

Change of use from existing restaurant use at ground floor to proposed office use (235sq.m).

Upgrading and improvement of an existing, established and historic entrance to improve access and egress and overall vehicle user safety to Baldonnell Garden Centre and residential house on site, demolition of existing florist building on site, new gated entrance and all associated site works.

For development comprising of an Attic conversion including a dormer roof and window to rear of house for the purpose of storage. The addition of a window to first floor to the rear elevation. Addition of two windows on the side elevation, one at first floor level and the other at attic level. Internal alterations to first floor layout to allow for the addition of staircase serving attic level, relocation of bathroom and addition of an ensuite. Storeroom relocated from the first floor to the attic level.

Permission for a proposed Sprinkler Tank & Pump House and Retention Permission for a reduced size ESB substation as part of an overall warehousing development at Kingswood Road, Citywest Business Campus, Co. Dublin. (Existing granted Planning Reg Ref: SD22a/0290 & SD23A/0281 with associated warehousing development works under construction on site). 1. Provision of Sprinkler Tank 10.00m diameter, 9m high, effective capacity = 675m3, to rear (South-west) yard, which will serve the warehouse building's sprinkler system; 2. Provision of Pump House servicing the proposed sprinkler system, 48m2, 2.8m high, adjacent to above referenced sprinkler tank; and 3. Associated site landscape enhancement in the immediate area of the proposed Sprinkler Tank & Pump House. The subject elements for which Retention Permission is sought are as follows: 1. Retention Permission for a reduced size ESB Substation from 37m2 (as granted) to 24m2 as recently constructed.

Retain existing mezzanine storage floor as installed at first floor level; Permission to convert part of the first floor mezzanine storage floor to office space and install new windows to both the east (side) and the south (rear) elevations at first floor level.

A new vehicular entrance and boundary fence to new display surface car parking, on 0.15ha of vacant land, located west of the existing car parking including a 6m high internally illuminated signage totem and tensile fabric canopy structures. Extension of existing workshop by 208sq.m located to the north of Block B and extension of 106sq.m for new vehicle preparation to the north of Block B and internal alterations including a trade parts counter and a new double door on the west elevation of the showroom building, known as Block B, a two storey extension matching the existing height of Block C of 692sq.m to the north of the servicing area of the building known as Block C for vehicle servicing and waiting facilities and an external canopy structure of 200sq.m to the east elevation of the existing parts building known as Block A on an overall site of 2.257ha.

Erection of linear arrays of solar photovoltaic panels on the roof of Unit 2007 together with 4 invertors 1.075m wide x 0.33m deep x 0.55m high together with all ancillary works. There will be 350 panels in all, each 1.34m x 2.28m in size, located on 3 of the 4 south facing sides of the roof area, all concealed from view behind the parapet walling. No panels are proposed on the 4 north facing elevations. The panels will provide sustainable energy to the premises with the surplus being fed into the grid. An additional means of escape is also proposed.

Changes of use within parts only of the existing building from storage and production to: (a) use of an area as a marketing suite/showroom (380sq.m ground floor together with an 80sq.m first floor mezzanine extension); (b) automotive academy and training area (925sq.m); (c) construction of additional ancillary office/welfare accommodation (467sq.m) at ground and first floor; (d) two storey briese soleil/sun shade structure to the south elevation; (e) additional windows and glazed screens on all elevations; (f) new single storey hand wash valet structure (146sq.m) on south elevation; (g) new wall mounted signage to west and south elevation; (h) 14 new car parking spaces (previously approved) and 25 new electric car charging points; (i) revisions to existing hard and soft landscaping to accommodate the development; (j) new ramped and stepped access with external terrace to form new entrance area with canopy at existing exit on west elevation; (k) existing 8 metre high water sprinkler tank to be replaced with 11 metre high water sprinkler tank. It is intended that the majority of the premises (6926sq.m) will continue in use for storage and distribution with ancillary office use continuing also.

Erection of a new external car wash structure (64sq.m) at the south east corner of the existing building, including for all associated site works, excavations, pumps, drainage, kerbing and landscaping.