The proposed development will consist of the following: 1. A new truck wash facility to the rear of the existing site. 2. A new truck refuelling station to the front of the site and 3. All of the above works along with all ancillary and associated site works necessary to complete this development.

Erect 1 no. company logo advertising sign to our existing warehouse unit (built as per previously granted planning permissions reg ref SD18A/0314 (ABP-304148-19); SD19A/0408, SD20A/0187, SD21A/0239 and SD22A/0302) at Kingswood Business Park Baldonnell Dublin 22. The signage (total area of 28.55 sq.m) is proposed to be affixed to the existing warehouse unit side (eastern) elevation, 12.25m above ground floor level and it will consist of raised backlit company logo lettering. All other details such as site access, landscaping, external surface finishes, water supply, drainage, attenuation systems etc will remain as per the aforementioned granted planning permissions.

For Blanket installation of photovoltaic panels (PV) over existing warehouse roof footprint circa 11,400m2 and all associated works. PV panels will not extend above parapet line. Permission is being sought as building is located between Baldonnell and Tallaght University Hospital Solar Safeguarding Zones

1. Omission of existing non-functional business park sliding gate (sliding into car park area in applicant's ownership); and 2. Provision of a new boundary Fence Type D, consisting of piers at 12m c/c and round bar railing, to the southern and eastern site's boundary, on the lands in applicant's ownership at our existing development (built as per previously granted planning permissions Reg Ref SD18A/0314 (ABP-304148-19); SD19A/0408, SD20A/0187, SD21A/0239 and SD22A/0302) at Kingswood Business Park, Baldonnell, Dublin 22. All other details such as site access, landscaping, external surface finishes, water supply, drainage, attenuation systems etc will remain as per above listed granted permissions. NOTE: This planning submission is one of two independent applications for positioning of boundary Fence Type D.

Upgrading and improvement of an existing, established and historic entrance to improve access and egress and overall vehicle user safety to Baldonnell Garden Centre and residential house on site, demolition of existing florist building on site, new gated entrance and all associated site works.

Alterations to existing granted planning Reg. SD18A/0314, SD19A/0408, SD20A/0187 and SD21A/0239; elevation alterations including change of cladding colour of the security hut from Gull Grey to Anthracite; site plan alterations including omission of the business park existing sliding gate, sliding in to the proposed development carpark area; provision of a new boundary fence Type A to the southern and eastern site boundary; provision of a new security hut disabled car parking space to the west of the hut at HGV access/egress to the development; all other details such as site access, landscaping, external surface finishes, water supply, drainage, attenuation systems etc will remain as per the aforementioned granted planning applications.

Alterations to an existing granted planning application (previously granted permissions Reg. Ref. SD18A/0314 [ABP-304148-19], SD19A/0408, SD20A/0187); reconfiguration of the ground floor area consisting of a new ancillary storage area to the proposed building's eastern elevation measuring 75sq.m, at mezzanine level; change of use of 57sq.m of warehouse floor area to staff facilities due to the following, addition of single storey fire protected corridor from Office A to in the south-west corner of the warehouse, overall 45sq.m floor area addition; addition of stairs from warehouse to mezzanine level, overall 12sq.m floor area addition; elevation alterations, introduction of covered glazed structure at the main Office entrance to the front (southern) elevation, overall height 6.18m; introduction of Integrated Modular Louvre System to Charging Area to the front (southern) and side (eastern) elevation; change of colour of southern elevation warehouse canopy to Anthracite; introduction of fire escape doors to the side (eastern) elevation; site plan alterations, omission of an existing roundabout and provision of revised road junction with an access/egress to the proposed development and to the existing Business Park; provision of a new boundary fence Type A to the southern and eastern site boundary; introduction of additional 26 HGV parking spaces to the western concrete yard (overall area 1547sq.m) and the omission of car parking at the same location; introduction of 8 van parking spaces (overall area 240sq.m) and rearrangement of the car parking spaces due to introduction of the above changes, plus addition of gas tank and generator; associated drainage layout adjustments due to the inclusion of the above alterations; all other details such as landscaping, external surface finishes etc. will remain as per the aforementioned granted planning applications.

Further alterations to an existing granted planning application (previously granted permissions Reg. Ref. S018A/0314 (ABP-304148-19); SD19A/0408; S020A/0187); alterations consist of site plan alterations; revised site boundary to suit new arrangement of additional land used as concrete yard and HGV parking; omission of an existing roundabout and provision of a road junction with an access/egress to the proposed development and to the existing business park; provision of a new boundary fence type A to the southern and eastern site boundary; associated drainage adjustments; all other details will remain as per the aforementioned granted planning applications.

Alterations to an existing granted planning application (previously granted permission Reg Ref SD18A/0314 [ABP-304148-19]; SD19A/0408), to incorporate elevation revisions only to the front 3 storey attached ancillary office block. the alterations comprise a change of material cladding and fenestration revisions to the front and immediate side elevations of the ancillary offices (south, east and west elevations). The previously approved cladding 'Ceramic Granite' stone finish is proposed to be revised to 'Benchmark Dri-Design Rainscreen Facade' profiled metal cladding system. All other details remain as per the aforementioned granted planning applications.

Alterations to an existing granted planning application Reg. Ref. SD18A/0314 as follows: (1) reconfiguration of the ground floor area with provision of a new ancillary charging area to the proposed building's southern elevation measuring 265sq.m, overall height 6.2m; previously proposed plant room to the building's eastern elevation to be omitted; (2) elevation alterations with introduction of 11 level access doors to the eastern elevation; introduction of charging area to the southern and eastern elevation and rearrangement of fire doors to the eastern elevation; introduction of the canopy above level access doors and horizontal curtain walling above the canopy to the eastern elevation; height reduction to the canopy above level access doors to the western elevation; (3) site plan with rearrangement of the car parking spaces due to the introduction of charging area to the south and level access doors to the east of the proposed warehouse, including the provision of car parking spaces to the west for warehouse staff and omission of HGV parking at the same location; (4) provision of ESB sub-station; incorporating minor adjustments to the drainage on site; all other details will remain as per the granted application Reg. Ref. SD18A/0314.