The development will consist of a 4.42 hectare stie currently in use as Greenogue Recycling to include the following; A) Demolition of existing green recycling structures on site including office and storage shed with total area of 2,265m2. B) Construction of 7 no. warehouse units, with maximum height of 15.3 meters, all with ancillary office, staff areas, bin stores etc. Each unit has access to service yard and HGV loading / unloading area. The total floor area of the warehouse development is 16,602.2 m2, made up as follows; i) Unit 1 - gross floor area of 3,851.1 m2. ii) Unit 2 - gross floor area of 3,886.8 m2. iii) Unit 3 - gross floor area of 2,758.3 m2. iv) Unit 4 - gross floor area of 1,685.4 m2. v) Unit 5 - gross floor area of 1,062.2 m2. vi) Unit 6 - gross floor area of 1,679.2 m2. vii) Unit 7 - gross floor area of 1,679.2 m2. C) Access to be provided from existing entrance to the site via Tay Lane. New footpaths / cyclepaths throughout the site including a new footpath / cyclepath connection to the Greenogue Logistics Park to the north of the site. D) 170 no. car parking spaces and 100 no. secure, sheltered bicycle parking spaces to serve the warehouse units. E) All ancillary site development works to include; minor realignment of site entrance, landscaping, internal raods, drainage, utility services, service yards, HGV loading / unloading areas, level access goods doors, dock levellers, site lighting, boundary treatments, signage, storm water drainage network, underground water and foul servicing, green roofs on warehouse units, form part of this application.

Planning Permission for Alterations to amend the previous granted permission (Reg Ref SD23A/0178) for a Self-Storage Facility revised to provide an open hard surfaced yard to be used for the parking of vehicles and trailers and external storage of non-hazardous goods with all associated works and Ancillary WC Facility at Tay Lane, Greenogue, Rathcoole, Co. Dublin. The subject alterations for which Planning Permission is sought are as follows: 1. Permitted Self-Storage Facility omitted to provide an open hard surfaced yard 2,468m2 to be used for the parking of vehicles and trailers and external storage of non-hazardous goods; 2. Provide a single storey Ancillary WC Facility, 27m2, 4.2m high, to the North-East boundary of the site. 3. Omission of 6 no. car parking spaces to the side (north-western) elevation; 4. Adjusted HGV site entrance set back to accommodate a recessed HGV Access/egress; 5. Provision of 9m wide HGV sliding gate; 6. Associated landscape adjustment due to the inclusion of the alterations above; 7. Associated drainage adjustments due to the inclusion of the alterations above.

Construction of a Self-Storage building with ancillary facilities and associated development. The Self-Storage building will have a maximum height of 9.745 metres with a Gross Floor Area of 1,796 sq m including storage area (1,698 sq m) and ancillary facilities (98 sq m). The development will also include: a vehicular entrance/exit to the site via Tay Lane; 6 No. ancillary car parking spaces (including 1 No. accessible parking space); loading bays; external fire escape stairs; an external canopy; boundary treatments; hard and soft landscaping; lighting; and all associated site and development works above and below ground.

Construction of a four-storey apartment block ( 4224 sq.m) consisting of 58 age friendly residential units comprising 20 one bedroom units and 38 two bedroom units with associated private balconies, associated lift and stair cores, entrance lobby, and circulation space; Provision of a community facility (99.3 sq.m) and ancillary accommodation including refuse store (26.9 sq.m), cycle store (36 sq.m), plant room (46.2 sq.m), sub-station (14 sq.m), switch room (16 sq.m), landscaped public open space (907.4 sq.m) and communal open space (1225.6 sq.m), and 30 car parking spaces and 80no. cycle parking spaces to serve the development; Vehicular access to the development will be provided via an upgraded entrance from Tay Lane with a minor pedestrian access provided from Eaton Drive to facilitate direct linkages to the town centre; Planning permission is also sought for all ancillary site and development works above and below ground to facilitate the development including the provision of internal access roads and pedestrian / cycle pathways and linkages, boundary treatment, public lighting, hard and soft landscaping, services, rooftop PV panels and associated signage.

Alterations to existing granted planning, Ref. SD19A/0065, for a proposed Waste Metal Transfer Facility including Waste Electric & Electronic Equipment (WEEE). The subject alterations for which planning permission is sought for are as follows: (1) Reconfiguration of the floor plan areas as follows: (A) Provision of 535sq.m additional floor area due to introduction of areas as follows - (A.1) Extended display area at ground floor of ancillary office, addition of 46sq.m floor area, (A.2) Extended open plan office at first floor of ancillary office, addition of 20sq.m floor area, (A.3) Single storey ancillary storage facility to the front north-east elevation totalling 166sq.m with overall height 7m, (A.4) Mezzanine area to the south eastern side of Light Industrial Unit, totalling 303sq.m. Alterations listed above result in total building area Increase from 4391sq.m to 4926sq.m as shown at the revised table of gross Internal floor areas & uses. (B) Change of use of 64sq.m of light industrial unit floor area to staff facilities due to the introduction of: (B.1) Enclosed stairs from Light Industrial Unit to ancillary office/staff facilities (overall 31sq.m), (B.2) single storey cleaners store and storage at ground floor to the north-eastern comer of light industrial unit (overall 33sq.m). (C) Change of use of 100sq.m of workshop charging area & staff facilities to workshop area & single storey office/staff facilities. (D) Introduction of full height dividing wall at light industrial unit. 2. Elevations alterations as per list above plus additional alterations as follows: (a) Provision of full height cladding (ground floor to roof) to light industrial unit and ancillary Workshop. (b) Introduction of 11m wide x 6m high open to light industrial unit side (north-western) elevation, (c) Rearrangement of all fire exit & level access doors to light industrial unit & ancillary workshop including omission and addition of the same, (d) Introduction of integrated modular louvre system to light industrial unit rear (south­western) & side (north-western) elevation, (e) Introduction of canopies to the ancillary office main entrance and above 11m wide open & dock levellers to light industrial unit side (north-western) elevation. (3) Site plan alterations as follows: (a) Rearrangement of car parking spaces due to provision of office extended display area to the front (north-eastern) elevation, (b) Provision of new finish floor level to office/staff facilities and Workshop and associated site levels adjustments, (c) Provision of a new boundary fence type (paladin fence) throughout the development, (d) Provision of additional weighbridge - overall 2 proposed and rearrangement of brush wash and steam wash between workshop and site's north-western boundary, (e) Provision of building protection bollards to workshop side elevations (south-east and north­west), (f) Associated drainage adjustments due to the inclusion of the alterations above plus reduction of surface water and foul sewer outfall route as per as built access road and services which serve built developments to the east of the site. All other details such as landscaping, lighting, external surface finishes, Environmental Impact Assessment Report (EIAR), Flood Risk Assessment etc. will remain as per the granted application ref. SD19A/0065.

Provision of additional facilities at the existing Greenogue Equestrian Centre (permitted under SDCC Reg. Ref. SD16A/0417 and as amended under Reg. Ref. SD18A/0035) to create a sport horse Centre of Excellence comprising a new indoor sand arena (3,759sq.m); the extension of the existing main outdoor jumping sand arena 800sq.m (resulting in a total of 4,000sq.m); the extension of the existing indoor sand arena by 250sq.m (resulting in a total of 1,625sq.m); a 2 storey training and administration facility (1,300sq.m); a veterinary shed (572sq.m); a hay shed (1,209sq.m); a 2 storey visitor toilets, lockers and storage facility (200sq.m) and a single storey building (673sq.m) to accommodate a laboratory for an Assisted Reproduction Programme. The proposed development also includes the provision of 50 car parking spaces within the existing yard; 20 bicycle parking spaces; plant; hard and soft landscaping; boundary treatments; increased hard standing areas for parking and turning of horse boxes and lorries; and all associated site development works above and below ground at this 7.88 Ha (c.78,800sqm) site.

Construction of a single storey, three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance, hard & soft landscaping; boundary treatments; all associated site development works above and below ground.

Construction of a single storey three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance; hard and soft landscaping; boundary treatments and all associated site development works above and below ground.

Single storey extension to the left hand side; extension to the front at ground and first floor level in order to straighten the front building line; addition of a two storey extension to the front which will act as a porch at ground floor level and a bathroom at first floor level; to face the central portion of the front elevation in natural stone over its full height; extend the existing garage on the right hand side to the front and rear; remove the existing garage roof and build a first floor extension over the entire extended garage area; existing ground floor area including the garage is 152.38 sq.m & the proposed ground floor extensions will add 101.05 sq.m.; the existing first floor are is 68.95sq.m. & the proposed first floor extension will add 115.59sq.m.; all ancillary site works required to complete the project.