Site planning risk brief

PROTECTED STRUCTURE: 1. Construction of a new single-storey addition to the rear Ground Floor, and removal of the existing single-storey addition to the rear of the building; 2. Construction of a new 2-storey addition to the Ground & 1st Floor east side, and removal of the existing single-storey addition to the east side of the building; 3. Reconfiguration and refurbishment of the existing Ground Floor apartment unit, to include new services, finishes & fixtures; 4. Formation of new patio doors to the existing door & window openings to the rear.

PROTECTED STRUCTURE: Permission for development of a single storey mews building within the rear garden of the property at mulberry, 27 Ailesbury Road, Ballsbridge, Dublin 4 D04V2H6 (a Protected Structure), the proposed mews development will include: 1. The construction of a new single - storey mews building within the rear garden to accommodate a garden store and home gym. 2. The mews will be constructed using materials to match the existing house, including matching brickwork and selected copper roof, consistent with the finish of the existing house extension, to ensure architectural integration and minimal visual impact. Works will also include widening of existing door opening at rear boundary to 2.7m width onto Ailesbury Wood.

PPROTECTED STRUCTURE: permission for development consisting of refurbishment & extension works to existing three storey with rear four storey return end of terrace house ( A Protected Structure) to include the following: 1. demolition of existing non original single storey garage, boiler house and wc to side west elevation and rear south elevation of existing return at lower ground floor level, 2. demolition of non-original flat roof study extension opening off the entrance hall at upper ground level west elevation and removal of external cast iron stairs from upper ground level to garden level, 3. Construction of new single storey extension to rear sought elevation at lower ground floor comprising link to new kitchen, dining and garden room, 4. construction of three storey side extension to west gable comprising two no. bedrooms and extended dressing room and study area at 3rd floor level all linked to existing return at each level, 5. Internal alterations at lower ground floor to form hall access to new bedroom and kitchen dining areas. Removal of existing 'WYATT' style window to rear of new dining room to form access to new glazed link - this window will be reused in the south elevation ground floor side extension. Removal of non-original ensuite at ground floor return and provision of new link to new side extension with bedroom and reception wc. Alterations at first floor level to reconfigure front master bedroom with new ensuite to one side and new access ope to dressing room on the west side. Conversion and adaptation of rear first floor bedroom to dressing room opening off front master bedroom, 6. Installation of new passenger lift to serve lower ground floor, upper ground floor and first floor with associated alterations at each level to form access to lift, 7. upgrading works to external building fabric to include reslating of main roof reusing existing salvaged welsh slate, new valleys, soffit and fascia to front, cast iron rainwater goods, repointing of existing brick to front elevation together with upgrading works to existing original sash windows replacing sand and cement render to rear elevation with lime render, 8. Hard and soft landscaping to front and rear of house, 9. Associated site works including boundary repairs, new and surface water drainage, 10. widening of existing vehicular entrance to 3.4m to west side with replacement of non-original gates and railings on this side the new cast iron gates and railings to match original design.

PROTECTED STRUCTURE: Development will consist of (1) Conservation and repair works to external fabric consisting of: (a) Stripping of roof; provision of new battens and breathable membrane; new leadwork to valleys and hips; re-slating in salvaged slates as far as possible with imported slates to make up shortfall; repairs (and replacements where necessary) to gutters and rainwater goods; repointing to chimney stacks, inclusive of replacement bricks where necessary; (b) Raking-out and re-pointing in lime mortar to external facing brickwork including localised replacement of brick where necessary; (c) Repairs to external render, including stitching as may be required to make good cracks; (d) Repairs to sash windows to include draught stripping and cutting and splicing any rotten timber sections. (2) Material alterations consisting of: (e) Widening of the existing vehicular entrance gates on Ailesbury Road from 2637mm to 3277mm, inclusive of relocating 1 No. gate pier; reinstatement of existing railings, and extending width of existing gates; (f) Alteration to existing window ope on west (side) elevation at lower ground floor level to form a door ope; (g) Alteration to existing window ope to south (rear) elevation at lower ground floor level to provide French doors to rear garden; (h) Enlargement of existing ope between front and rear reception rooms at lower ground floor level; (j) Reconfiguration of second floor return to form en-suite to master bedroom, inclusive of removal of section of wall and existing door ope, formation of new door ope in new location and short flight of steps to connect to first floor level.

PROTECTED STRUCTURE: The development will consist of the demolition of the existing non-original part single-storey, part two storey side extension (52.8m2 ground floor, 16m2 first floor, 68.6m2 total), removal of interior stud partitions at ground floor level and on the second floor return, and demolition of part of the side and rear walls of the ground floor rear return; the construction of a new part single-storey, part two-storey, part three-story side and rear extension (99.1m2 ground floor, 6m2 first floor, 6.5m2 second floor, 111.6m2 total), including double-height entrance hall, lift access to the return at two levels, and rear garden level living/kitchen/dining area incorporating the existing rear return; the insertion of a new WC and two en-suite shower rooms at ground floor level; inserting a new en-suite shower room to the rear bedroom at second floor level, with conservation roof light above; insertion of a new vehicular access gate on the rear boundary; and general conservation and associated ancillary site works to include repairs to roof, repointing of the existing brickwork façade, removal of all cementitious render and replacement with lime-based render, restoration works to existing chimneys, refurbishment of the existing sash windows and historic ironwork, including a widening of the existing vehicular access on the front boundary, with any PVC gutters and downpipes to be replaced by cast-iron to match existing.

PROTECTED STRUCTURE: planning permission is sought for the construction of a part single storey, part two-storey residential extension to the rear of the existing protected structure. The proposed works will comprise the following: (i) demolition of existing shed/structure to the rear, (ii) construction of a two-storey residential extension to the rear with kitchen, living and dining room proposed at lower ground floor and bedroom at mezzanine level, (iii) internal alterations to original house (a protected structure), (iv) widening of the existing vehicular entrance to the north from Ailesbury Road and south from Ailesbury Wood. The internal alterations include: (i) remove sections of wall from kitchen at lower ground floor level to facilitate the development of an open plan kitchen/living/dining area, (ii) remove section of wall at upper ground floor level to facilitate a new glass balustrade overlooking kitchen below, (iii) introduction of 1 no. bathroom and 1 no. robe room in lieu of the existing bedroom at mezzanine floor level, (iv) remove section of wall at mezzanine floor level to facilitate 7 no. steps to the proposed extension; (v) remove section of wall at first floor level to facilitate the provision of an ensuite to the existing master bedroom, (vi) installation of 1 no. ensuite and robe to the existing bedroom at first floor level; (vii) remove a section of wall to the existing WC at first floor level to provide for a reconfigured bathroom and larger bedroom with robe. The proposed extension has a total floor area of 94 sqm. The proposal also includes all ancillary site, engineering and boundary works necessary to facilitate the development including the temporary partial removal of the non-original block wall to the rear of the site during construction to be reinstated following completion of the development and any associated roof works to the existing pitched roofs of the protected structure to ensure it is fully weathered.