Site planning risk brief

PERMISSION The development will consist of: (i) demolition and removal of existing temporary reefer gantry (c. 6m in height; c. 1.5m wide, c. 23.8m long northern section and c. 13m long southern section); (ii) installation of a new steel frame reefer gantry (c. 7.26m in height; c. 2m wide; c. 24.3m long northern section and c. 13.5m long southern section) with associated reinforced concrete pad foundations; and (iii) all ancillary site development works.

PROTECTED STRUCTURE: permission for a single storey sorting building and canopy to the rear of the site of their construction and demolition recycling facility. The northern and western boundary walls of the premises are within the curtilage of a listed protected structure in the currently City Development Plan. The facility has a current waste licence ( WFP-DC-10-0020-01).

PERMISSION: Permission for development at our existing molasses storage terminal at the Corner of South Bank Road and Whitebank Road, Ringsend, Dublin, D04 TC98. Site located in the Poolbeg West Strategic Development Zone. The development will consist of 6 no. additional liquid storage tanks, a loading gantry, 2 x 200mm fixed pipelines to extend from the subject site to the Liffey/port quay side and a new pipe bridge crossing the Pigeon House Road at ED&F Man Liquid Products Ireland Limited.

PERMISSION for development at this c 2.4 ha site on ESB lands located to the south of the existing Ringsend 110 kV Substation on the Poolbeg Peninsula, Southbank Road, Ringsend, Dublin 4. The development will consist of the removal of the existing Air Insulated Switchgear (AIS) electrical substation and the construction of a new 110 kV Gas Insulated Switchgear (GIS) electrical substation and will include the following elements: a. Construction of a new substation compound of approximately 3916 m², with a c. 2.6 m high palisade fence around the entire perimeter of the substation. The compound comprises a new indoor 20 bay GIS building measuring c. 1,090 sq.m (c. 44.5 (m) x c. 24.5 (m) x c. 16.3 (m); b. Provision of new electrical plant and equipment within the substation including: -2 no. Transformer bunds (Length (c. 22.9m) x Width (c. 10.9m) x Height (c. 7.0m)); -2 no. 110 kV electrical transformers and associated outdoor electrical equipment to facilitate underground cable connections between the existing transmission circuits and the proposed GIS building: c. Provision of site services including compound lighting, telecommunications, access roads and drainage; d. Subsurface ground surface water attenuation tank (c. 143 m2 ); e. All associated and ancillary site development works to accommodate the construction of the substation and transferring of the cable circuits from the existing AIS to the new GIS Building; and f. Retirement and removal of the above ground elements associated with the existing AIS. The application is partially located within Poolbeg West Strategic Development Zone (SDZ) Planning Scheme area. Planning permission is being sought for a period of 10 years. The application includes a Natura Impact Statement (NIS).

PERMISSION The development will consist of a 220kV underground cable measuring approximately 4.0m in length, from the Ringsend Open Cycle Gas Turbine (OCGT) plant permitted under application ref: PWSDZ3074/23 and the existing Irishtown 220kV substation, to facilitate electricity generated to be transferred to the national grid, and includes all associated works to facilitate the development.

Marine Terminals Ltd intends to apply for permission for development at MTL Terminal, Dublin Port, Sean Moore Road and Pigeon House Road, Ringsend, Dublin 4. This site is located within the Poolbeg West Strategic Development Zone (SDZ). The development will consist of: (i) construction of a low-voltage information technology (IT) switchboard kiosk (c. 7.8sq.m; c. 2.4m in height) over a reinforced concrete slab (c. 4.2m x c. 3.5m; c. 0.2m in height); (ii) construction of a steel lattice frame telemetry tower (c. 6m in height) over a reinforced concrete slab (c. 2m x 2m; c. 0.2m in height above ground); (iii) demolition and removal of existing temporary ancillary office building (c. 480sq.m; c. 7.2m in height) and area resurfaced; and; (iv) all ancillary site development works, including duct connections.