Planning precedent report

Demolition of the remaining fire damaged steel structure and the reconstruction of a single storey pitched roof commercial warehouse and office unit (378sq.m.) including roof lights; external signage; hard landscaping and for all site services above and below ground including connections to existing services.

The erection of a palisade fence on a 450mm height concrete plinth (total height = 2400mm) along the east side of the property, 1000mm inside the boundary line, with an electric fence (total height = 4000mm). Electric fence fixed to internal leaf of palisade fence. (1) The erection of an electric fence (total height = 4000mm) along the south side of the property, fixed to internal leaf of existing palisade fence (total height = 4000mm). The existing palisade fence is erected approximately 2000mm inside the boundary line. (2) The erection of an electric fence (total height = 4000mm) along part of the west side of the property, fixed to internal leaf of existing palisade fence (total height = 4000mm). (3) The erection of a palisade fence on a concrete plinth (total height - 2400mm) along the north side of the existing building, 1800mm in front of the building along which will incorporate 6 pedestrian turnstiles for pedestrian access and egress. (4) Replacement of 2 existing double leaf palisade gates with 4 sliding gates along the north elevation, at each end of the building. (5) The modification to the south elevation of the building to create 8 security vehicle access traps as per drawing. (6) The modification of the east elevation of the building, removal of 3 roller shutters and replacement with 5 windows at ground floor level. (7) 2 new escape doors to the south elevation. (8) Installation of 3 new windows at ground floor level on the south elevation at the south east corner. (9) Associated internal fit-out and security works. (10) Associated works. Note: The non-lethal, pulsed monitored electric fence is a deterrent to intrusion, fixed to internal leaf of each palisade fence with interim control system and warning signs every 10 metres or less and clear demarcation zone internally.

The proposed development will consist of an amalgamation of two existing units, including the making of internal connections between both units across the three floor levels, of replacement of the solid metal double doors at the rear of Unit 17 with a double glazed window, and of installation of two new self-illuminated signs, the first sign of approx. 2.09sqm on the West elevation 8.300m above ground and second sign of approx. 3.125sqm on the East elevation 3.260m above ground

Replacement of signage on the premises front elevation.

Construction of vehicular access onto Holly Road.

Alterations to the previously approved plans (Reg. Ref. SD18A/0021) to include: (1) enlargement of the standalone ESB substation building from 14sq.m to 21sq.m with access to same via the public footpath; (2) alterations to the previously approved building mounted signage.