Permission is sought for alterations and first floor dormer extension (12.4 m2) to rear of semi-detached dwelling to include 2 additional bedrooms, internal alterations to first floor layout, installation of dormer window (3.6 m2) on front elevation, relocation of roof light on rear elevation and relocation of window on side elevation.

The development will consist of revisions to the previously permitted Unit X2 and Unit X3, each comprising a main logistics/warehouse hall with ancillary office buildings, under Fingal County Council Reg. Ref. FW23A/0191. For the purposes of this application Unit X2 will be referred to as Unit 7 and Unit X3 will be referred to as Unit 8. These revisions involve interior and exterior modifications to the permitted buildings and associated external ancillary buildings. The proposed development will comprise of the following; (1) Amendments to Unit 7 which will include: (i) Modification to the external footprint and internal layout of Unit 7 resulting in a net decrease in GFA from 8,072.4 sqm to 8,030 sqm (a reduction of 42.4 sqm); (ii) Reconfiguration of internal layout of the warehouse hall, resulting in an increase in floor area of the marshalling office from 50.1 sqm to 71 sqm (an increase of 20.9 sqm) and the removal of the marshalling office mezzanine (54.6 sqm), with associated adjustments to the hall façades; (iii) Increase in overall height of Unit 7 from 17.065m to 17.15m (an increase of c. 0.085m); (iv) Increase in plant deck area mezzanine from 31 sqm to 91 sqm (an increase of 60 sqm); (v) Internal layout revisions and reconfiguration of the ancillary office layouts, including slight reduction in gross floor area from 747.6 sqm to 739 sqm (a decrease of 8.6 sqm); (vi) Changes to elevations and facades, including adjustments to fenestration, minor design feature modifications, and updates to materials; (vii) Reduction in the size of the permitted substation serving Unit 7 from c. 50 sqm to c. 26 sqm (a reduction of 24 sqm) (viii) Modification to the design and footprint of bicycle store associated with Unit 7 resulting in an increase in internal floor area from 55 sqm to 60 sqm; and (ix) All other ancillary and associated site development works, including modifications to drainage arrangements. The proposed amendments to Unit 7 will result in a net decrease in the gross floor area by 42.4 sqm and a net decrease in the gross floor area of the substation by 24 sqm. (2) Amendments to Unit 8 which will include: (i) Modification to the external footprint and internal layout of Unit 8 resulting in a net decrease in GFA from 4,896.4 sqm to 4,803 sqm (a reduction of 93.4 sqm); (ii) Reconfiguration of the internal layout of the warehouse hall, including the removal of marshalling office (50 sqm) and marshalling office mezzanine (54.6 sqm), with associated adjustments to the hall facades; (iii) Reduction in overall height of Unit 8 from 17.065m to 16.945 (a decrease of 0.12m); (iv) Increase in plant deck area mezzanine from 30.4 sqm to 95 sqm (an increase of 64.6 sqm); (v) Reconfiguration of ancillary office layout, including reduction in gross floor area from 663.3 sqm to 584 sqm (a decrease of 79.3 sqm); (vi) Changes to elevations and facades, including adjustments to fenestration, minor design feature modifications, and updates to materials; (vii) Reduction in size of the permitted substation serving Unit 8 from c. 50 sqm to c. 26 sqm (a reduction of 24 sqm) (viii) Relocation and modification to the design and footprint of the bicycle store associated with Unit 8 resulting in an increase in internal floor area from 55 sqm to 60 sqm; and (ix) All other ancillary and associated site development works, including modifications to drainage arrangements. The proposed amendments to Unit 8 will result in a net decrease in the gross floor area by 93.4 sqm and a net decrease in the gross floor area of the substation by 24 sqm

Planning permission sought for new stand-alone garage (75m2) and associated site works to rear of existing dwelling.

A two storey detached dwelling, all associated waste drainage measures. Permission is also sought for all site development works including boundary treatment and associated site ancillary works. Add Info received 11th December 2020. Add Info deemed Significant 16th December 2020. Revised Public Notices received 22nd December 2020. Clarification of Add Info received 3rd February 2021.

The development will consist of the construction of a two-bedroom single storey Parish Priest accommodation of 132 sq.m. as an extension to the southwest of the existing church building. The proposed Parish Priest Accommodation is linked directly to the existing church and previously granted Parish centre via a covered walkway. The Parish Centre extension was granted under ABP REF: 314040-22, 3 No. parking spaces and all associated landscaping and site works.

Planning Permission to carry out alterations to existing dwelling, consisting of new front porch entrance, removal of existing 2 number front bay windows, alterations to windows and doors on both gable walls and rear elevation. Also, to erect a double space car port and plant room to the rear of existing dwelling, conversion of existing detached domestic garage to 2 bedroom apartment, upgrade existing on site wastewater treatment system and all associated site works. Additional Information received 20/03/26

Permission for the construction of 1) A first floor dormer extension on top of an existing single storey kitchen to the rear and 2) A dormer roof window to the rear at first floor level with associated additional floor space at first floor level, with all ancillary enabling works.

For the change of use of existing ground floor garage and previously used childcare facility to a one bed family flat, a single storey kitchen to the rear of existing dwelling and the construction to the side of a new two storey detached dwelling with amendments to existing boundary walls to included for adjustment to existing site access to allow for second access and landscaping, boundary treatments, connection to existing services and all associated works necessary to facilitate the development

Permission is sought for the change of use of existing ground floor garage and previously approved childcare facility to a one bed family flat, a single storey kitchen to the rear of existing dwelling and the construction to the side of a new two storey detached dwelling with amendments to existing boundary walls to include for adjustment to existing site access to allow for second access and landscaping, boundary treatments, connection to existing services and all associated works necessary to facilitate the development.

Change of use from existing residential to Community Health Clinic with ancillary offices. The Community Health Clinic development consists of internal alterations to the existing ground floor including the provision of consultant, nurse and treatment rooms, 1 no. accessible WC, 1 no. other WC and a reception/waiting area with a 12 sq. meter extension forming a new main entrance to the rear. Ancillary office, staff and storage areas for the Health Clinic are to be located on the first floor. 6 no. additional car parking spaces will be provided in the rear yard with new vehicular and pedestrian access gates to be located on Park Avenue. Add Info received 8th March 2021. AI deemed significant 15/03/21 Revised notices received 06/04/21

Permission is sought for the construction of a single storey extension to side existing dwelling.

The development will consist of a conversion of the existing attic space to storage with a rear dormer, side dormer and roof light to the front.

Planning permission is sought for an attic conversion with dormer projecting window to rear and all associated site works.

The development will consist of a two storey dwelling with single storey rear annex, detached domestic garage, waste water treatment system, upgrade existing field gate to vehicular entrance and all associated site works.

Development will consist of demolishing an existing ground floor existing garage to the side of the existing house and replacing with a new ground floor only extension attached to the side of the existing house. Part of existing extension roof to the rear to be changed to a new a-frame roof. A new ground floor only storage shed to the rear of the existing site. A new Dutch hip gable wall with window at attic level to the side of the existing house and a new flat roof dormer to the rear of the existing house roof and all ancillary works.

Planning permission sought for new single storey dwelling and associated site works to within RV village development zoned lands to rear of Doorogue House, Ballyboughal, Co Dublin, A41 KV10.

Demolition of the existing single storey Playroom, and Store to the side of the existing house and the construction of a new single storey extension to the side and rear of the existing house, new pedestrian entrance to the side and all associated site works.

Development on a site of 0.265 hectares. The proposed development consists of a change of use of a previously approved agricultural sales and service workshop premises (floor area 509 sq.m) to commercial enterprise and/or community use, to accommodate village-scale uses in accordance with the RV (Rural Village) zoning objective. This development includes associated services, car parking, and all ancillary site works.

The development will consist of a change of roof type from hipped to pitched by raising the gable wall, an attic conversion to storage, a new window to the side and a roof dormer to the rear.

Permission for development and retention permission for development at this c. 3.71Ha. site at Newtown, Kilshane Cross, Co. Dublin. The development amends a permitted warehouse development (as granted under FCC Reg. Ref. FW20A}o126, subsequently part amended by FCC Reg. Ref. FW22A/0108 (Unit No. 2) and proposed to be part amended by two live applications (FCC Reg. Ref. FW22A/0193 - Unit No. 3 and FCC Reg. Ref. FW22A/0199 - Unit No. 4). The subject application pertains to lands relating to Unit No.1. The proposed amendments will principally consist of the following modifications to permitted Warehouse Unit No. 1: Revisions to the marshalling office and ancillary office layouts including the increase in size of the marshalling office from c. 65.9 sq.m m to c. 211-4 sq.m m and the increase of the first floor mezzanine plant room in the ancillary office from c. 44.25 sq.m m to c. 60.50 sq.m m (these changes will result in a decrease to the ground floor warehouse area from c.17,242.58 sq.m m to c. 17,202.8 sq.m m - no change to the total permitted gross floor area), and the replacement of office space, toilet blocks, staff facility, changing rooms and tea station with 'grey box' area (space that is subject to future tenant fit-out), with associated addition of an internal door to the staircore and to the warehouse modification of the roof design including a minor increase of the ancillary office parapet height from 11.85 metres s to 11.9 metres (50mm increase), revised PV panel layout, revisions to the roof light layout including provision of additional roof lights, provision of additional AOVs (Automatic Opening Vents), addition of roof access hatch/ladders, and amendments to the roof hip pitch; revisions to HGV entrance/exit layout to the east comprising the addition of traffic islands, bi-fold gates and fencing; reduction of HGV spaces from 21 No. to 19 No.; amendments to paving and landscaping; the addition of covered bike spaces in lieu of previously uncovered stands (no change to total spaces provided); modifications to boundary treatments including the addition of a security gate to the fire tender access to the west; addition of 2 No. sprinkler tanks (c. 56.7 sq.m m each) and a pump room (c. 72 sq.m m); revised Variable Refrigerant Flow Heat Pump compound location and layout; provision of an additional backup generator plinth slab (c. 22 sq.m m); addition of external protection bollards; elevational changes including the removal of 4 No. standard loading docks, addition of 2 No. graded access doors to loading bays, repositioning of 2 No. graded access doors, reduction of concrete facade on the eastern elevation, amended glazing arrangement, repositioning of fire escape doors, the addition of fire escape doors, and the repositioning of green walls; and all associated development works above and below ground. Retention permission is sought for the following modifications to permitted Warehouse Unit No.1: Revised ESB substation/switch room location (no change to permitted size) and the addition of a transformer room (c. 22.76 sq.m m)i provision of an acoustic soil berm and acoustic timber fencing (overall height is c. 5.010 metres) in lieu of permitted 4 metre high acoustic gabion wall; and all associated development works above and below ground.

Retention planning permission for existing commercial unit no. 2 mezzanine, consisting of offices, reception area, general stores, workshop, and staff canteen and wcs, along with attached compound. ( This planning application is for the retention of change of use from approved commercial agricultural use. ( Reg Ref F97A/1010 at unit 2 Doorogue, Ballyboughal, Co. Dublin.

Permission for a proposed new gable wall with small hip roof to the side of the existing house and a proposed new flat roof dormer to the rear of the existing house roof, also a proposed new Velux window to the front of the existing house roof and all ancillary works.

Permission for proposed new ground floor only extension to the side and part of the front of the existing house and all ancillary works.

The proposed development consists of:

MINOR AMENDMENTS TO UNIT 1 OF THE EXISTING PERMISSION REF FW20A/0126 A) 5982SQM OF ADDITIONAL WAREHOUSE FLOOR AREA WITHIN THE EXISTING BUILDING FOOTPRINT, THROUGH THE ADDITION OF TWO INTERNAL MEZZANINE LEVELS OVER PART OF THE FLOOR PLAN, AND INTERNAL WAREHOUSE OFFICE PODS. B) THE ADDITION OF THREE FREEZER CONTAINERS ANO TWO CHILLED LOBBIES ALONG WITH ASSOCIATED DOCK SHELTERS. (TOTALLING 192SQM). FIXED EXTERNALLY TO THE EXISTING LOADING DOCKS, C) THE PROVISION OF EXTERNAL MECHANICAL PLANT ELEMENTS AT GROUND LEVEL ALONG THE NORTH FACADE OF THE BUILDING, TO INCLUDE CONDENSER UNITS. AIR HANDLING UNITS WITH ASSOCIATED DUCTING, ALL WITH ASSOCIATED ENCLOSING SCREENS & PROTECTIVE BARRIERS, D) THE PROVISION OF AN ENCLOSING ACOUSTIC LOUVRED SCREEN FOR THE STANDBY GENERATOR TO THE WEST OF THE BUILDING. ALONG WITH ALL ASSOCIATED SITE WORKS. AI Received 20/02/23

The development will consist of:

Permission for change of use of an existing Take-Away Restaurant to small Gym and Fitness Centre, including: i) two new steps, a short ramp and permanent planter boxes on the footpath at the front door, and ii) new back-light plastic/aluminium signage in the panel over the shopfront.

The development will consist of a 4-bedroomed detached bungalow with detached garage to include the installation of a proprietary effluent treatment system and percolation area. Vehicular access is proposed through an existing entrance off the public road R122 to the east of the site. The development will include ancillary site development, drainage & landscape works, the proposed boundary treatment to consist of timber fencing, hedgerow and trees native to the area to include all associated site works.

The development will consist of a change of roof type from hipped to pitched by raising the gable wall, an attic conversion to storage, a new window to the side and a roof dormer to the rear.

The development will consist of a single storey side/rear extension to be used as a self-contained family flat and all associated site works.

The development will consist of:

The development will consist of the demolition of the

Permission for a detached for bedroom

The development will consist of revisions to the campus management/community building with associated outdoor sports/amenity space and retail unit, the central landscaped amenity area to the west and northwest of the building and the internal road network, as permitted under Fingal County Council Reg. Ref. FW23A/0191. The proposed development will comprise of the following: (i) Reduction in the footprint of the permitted campus management/community building from c. 689 sqm to c. 478.5 sqm (a reduction of 210.5 sqm). The height of the northern portion of building will be reduced from c. 9.5m to c. 6.5m (a 3m reduction) while the southern portion of the building will be reduced from c. 5.3m to 4.5m (a 0.8m reduction); (ii) Revisions to the internal layout of the permitted campus management/community building including the replacement of the multi-use sports hall with yoga and gym studios, incorporation of the permitted associated retail unit with the café space (c. 109sqm) resulting in a combined retail/café space (c. 127 sqm) within the campus management / community building; (iii) Changes to elevations and facades of the campus management/community building, including adjustments to fenestration, minor design feature modifications and updates to materials; (iv) Reconfiguration of the car parking area to the east of the campus management/community building and relocation of vehicular access point to the car parking area; (v) Omission of canopies and seating arrangements permitted to the northwest of the campus management/community building; (vi) Relocation of the multi-use games area (MUGA) to the western portion of the central amenity area; (vii) Provision of 2 no. external padel courts with associated lighting and playground within the central amenity area; (viii) Provision of additional 15 no. car parking spaces to serve the MUGA and padel courts to the west of the central amenity area; (ix) Revisions to the internal road network and bus stop; (x) Revised landscaping details, drainage arrangements, lighting and all associated works. Additional Information Received 13/02/2026

Permission for provision of a new two storey dwelling, including provision of a separate garage structure. Works will consist of the provision of a new farmhouse dwelling with living/kitchen area at ground floor and 4 bedrooms at first floor level. Works will include the provision of a new site entrance, patent treatment plant and percolation area and all associated site works. AI received 15/10/21

The development will consist of a change of roof type from hipped to pitched by raising the gable wall, an attic conversion to storage, a new window to the side and a roof dormer to the rear.

Planning permission sought for relocation of

The development will comprise the provision of 4 No. warehouses with marshalling offices, ancillary office space, staff facilities and associated development. The buildings will have a maximum principal height of 17.070 No. metres to the top of the parapet above ground floor level and will comprise the following areas: Unit 1 will have a gross floor area of 21,578 sq.m. including a warehouse (20,252 sq.m.), marshalling office (66 sq.m.), ancillary office space (1,216 sq.m.) and plant (44 sq.m.); Unit 2 will have a gross floor area of 9,206 sq.m. including a warehouse (8,347 sq.m.), marshalling office (66 sq.m.), ancillary office space (757 sq.m.) and pant (36 sq.m.); Unit 3 will have a gross floor area of 16,525 sq.m. including a warehouse (15,478 sq.m.), ancillary office space (944 sq.m.) and plant (37 sq.m.); and Unit 4 will have a gross floor area of 7,342 sq.m. including a warehouse (6,648 sq.m.), marshalling office (66 sq.m.), ancillary office space (589 sq.m.) and plant (39 sq.m.). A gate house with a gross floor area of 14 sq.m. will be positioned to the south-west corner of the site. The development will also include the repositioning of the access from the L3125 Road to the north of the site to provide a new entrance and a second vehicular access will be provided from the R135/Elm Road to the south-west. Road upgrade works are proposed along the L3125 to the north of the site which include the partial upgrade of Kilshane Cross signalised junction to incorporate a left turning lane and upgraded signals on the L3125 Local Road eastern approach arm and the provision of cycle paths and pedestrian footpaths. There will also be internal roadways; pedestrian access; 502 No. ancillary car parking spaces; bicycle parking; HGV parking and yards; level access goods doors; hard and soft landscaping; boundary treatments; ESB substations; signage; PV panels; lighting and associated site development works above and below ground. The total gross floor area of the development is 5,763 sq.m. (including warehouse structures, gate house and ESB substations). Add Info received 24th November 2020.

Development will consist of

Permission for development to construct a single storey porch extension to the front, two storey side extension containing study and kitchen on ground floor and en-suite bedroom on first floor, single storey kitchen-living room rear extension, attic conversion with rear dormer type window and velux and associated site works. AI received 19/04/21

Permission for a single storey rear, side and front extension. The proposed development will incorporate the following; (A) Demolish existing rear extension & front porch; (B) Construction of a single storey extension to the rear, side and front of house; (C) Internal layout alterations; (D) Minor modifications to the existing front facade; (E) All associated site works.

New ground floor extension to rear/side with internal modifications and associated site works.

Conversion of existing attic space comprising of modification of existing roof structure, side dormer with A-style roof c/w window, new access stairs and 2 no. roof windows to the rear.

Planning Permission for the construction of a dormer window to the rear of dwelling and two number Velux style windows to the front of the dwelling.

Permission for construction of an agricultural shed to include dairy, milking facilities, straw bedded area, cubicles, feeding area and underground slatted slurry & soiled water storage tanks and erection of a meal bin & water storage tank and all associated siteworks. Additional information received 19/09/2025 Significant Additional information received 26/09/2025

Conversion of existing attic space comprising of modification of existing roof structure, side dormer with A-style roof c/w window, new access stairs and 2 no. roof windows to the rear.

Planning permission is sought for: • Demolition of an existing vacant dwelling house (with a maximum height of c. 5.4m) located in the southern portion of the Site. • Demolition of an existing outbuilding (with a maximum height of c. 6.5m) located in the northeastern portion of the Site. • Demolition of an existing gateway located at the southern site boundary and extension of fence to close the existing entrance. • Associated and ancillary site clearance works to make the site ready for potential future development.

The development part amends a permitted warehouse development (as granted under FCC Reg. Ref. FW20A/0126, subsequently part amended by FCC Reg. Ref. FW22A/0108 (Unit No. 2), FCC Reg. Ref. FW22A/0193 (Unit No. 3), FCC Reg. Ref. FW22A/0199 (Unit No. 4) and FCC Reg. Ref. FW22A/0206 (Unit 1), and proposed to be part amended by a live application (FCC Reg. Ref. FW22A/0318 – Unit No. 1). The proposed development amendments will principally consist of: the provision of new entrance and wayfinding signage as follows: 1 No. totem sign at the southern entrance of the development (7 metres high), 1 No. totem sign at the northern entrance of the development (7 metres high), 1 No. totem sign at the gatehouse entrance towards the south of the site (3.5 metres high), 1 No. totem sign to the south-east of Unit No. 1 (2 metres high), 1 No. totem sign to the south-west of Unit No. 2 (2 metres high), 1 No. totem sign to the north-west of Unit No. 3 (2 metres high), 1 No. totem sign to the north-east of Unit No. 4 (2 metres high), 1 No. ‘park and amenities’ information sign to the north-east of Unit No. 4 (2 metres high), and 1 No. ‘parks and amenities’ directional sign located at the southern entrance to the running track (0.89 metres high); and all associated development works above and below ground. Retention permission is sought for the following modifications: a multi-use games area (MUGA) (c. 295 sq m) to the west of Unit No. 4 with an outdoor gym area (c. 135 sq m) and a perimeter gravel walkway; a running track along the western/north-western boundary of the site; alterations to the permitted gatehouse at the southern site entrance including the reorganisation of the internal layout, minor decrease in overall width from 3.4 metres to 3.33 metres (c. 67 mm reduction), minor decrease in overall length from 5.599 metres to 5.532 metres (c. 67 mm reduction), minor increase in overall height from 3.35 metres to 3.385 metres (c. 35 mm increase), elevational changes including the addition of 4 No. aluminium feature fins to the east elevation and relocation of the pedestrian entrance door on the east elevation to accommodate the internal layout changes, and modifications to the roof design to include the provision of an aluminium brise soleil surround to the perimeter of the gatehouse; and all associated development works above and below ground.

Retention permission sought for retention of converted garage used as bedroom and utility with associated front facade window opening alteration to existing ground floor of dwelling house.

Erect 4no. eighteen-metre-high poles to avail of full floodlight facilities to the existing grass pitch and associated site works.