Planning precedent report

PROTECTED STRUCTURE: The development within the curtilage of a property listed in the Record of Protected Structures, will consist of the demolition of the existing single storey commercial building and its replacement by the construction of a part single storey, part two storey building comprising a distribution hub for craft beer, a store, an office, a WC and an entrance lobby at ground floor level and three offices and a WC at first floor level. The existing boundary wall between Nos. 48 & 49 Fortesque Lane will be removed within the foot print of the proposed development and will be replaced by a new boundary wall. The pitched roof over the first floor offices will be finished with corrugated metal. The pitch roof over the ground floor office will be finished with a selected metal. The external walls will generally be finished with sand and cement render.

PROTECTED STRUCTURE: The development, within the curtilage of a property listed in the Record of Protected Structures, will consist of the removal of the garden shed, the rear gate/timber fence and part of the masonry wall, the creation of a covered set back entrance onto Fortesque Lane complete with roller shutter and garden gate, the construction of a two storey building comprising a car port, a garden room and an entrance lobby at ground floor level and a home office at first floor level. The existing boundary wall between Nos. 48 & 49 Fortesque Lane will be removed within the footprint of the proposed development and will be replaced by a new boundary wall. The roof will comprise a selected metal clad curved section and a flat section. The external walls will comprise selected brickwork and cladding.

The development will consist of, the construction of a single storey extension to the rear of the existing property in conjunction with the replacement of an existing set of glazed doors with a new set of windows to the front of the property addressing Fortescue Lane. As part of the proposed works some internal alterations to the existing house are also proposed.

PROTECTED STRUCTURE: Planning permission is sought for (i) Removal of 2 non-original single-storey extensions (total 9.15m2) and excavation of floor slab of return and part of garden, to rear at ground floor level. (ii) Removal of deflecting chimney, removal and rebuilding of rear wall to return with new window at first floor level. (iii) Demolitions to allow construction of new 13.75m2 single storey open plan kitchen/dining extension to rear with w.c. and utility, with 2 no. roof lights. (iv) Widening of existing ope at ground floor to link extension to main dwelling and removal of non-original door and widening of opening to rear hall. (v) Internal modifications including removal of non-original partitions, kitchen, bathroom removal of ceiling to bedroom of return and installation of slimline breathable dry-lining to external walls. (vi) Construction of stud partition walls to create new bedroom and family bathroom to return and new bathroom to landing, all at first floor. (vii) Essential restoration, conservation repair and refurbishment including to front railings/gate, repointing to external walls, decoration of front door, repair to sash windows to front/rear of main house and installation of heritage double glazing, reinstatement of cornicing to ceilings throughout. (viii) Replacement of non-original slates to rear return with new natural slate, repairs to roof structure, coverings, flashings and rainwater goods. (ix) Replacement of non-original windows to return with new timber hardwood sliding sash windows. Cills to first floor windows of return to be raised. (x) General upgrading to building services. (xi) Landscaping to front and rear, SUDS drainage and all associated site development works.

PROTECTED STRUCTURE: Planning permission is sought for; the change of use of the existing single storey garage to the rear of the existing dwelling to a two storey unit containing a garage, home office and W.C. at ground floor level and a sleeping/living/bathroom space at first floor level which is ancillary to the main house; the raising of the existing ridge height by 1365mm; reorientation of the existing roof; the addition of 3no. rooflights, one towards Bannavile and 2 facing the existing house; elevational changes to the front and back of the existing structure; and all associated site works.

PROTECTED STRUCTURE: The development will consist of the conversion of the existing car port to an entrance hall, the construction of a first floor rear extension and minor alterations to the internal layouts. The building is within the curtilage of a Protected Structure.