Site planning risk brief

Retention for development at Ashbourne Industrial Estate, Ashbourne, County Meath A84 ND23. The development consists of: Planning application for Retention and Completion of works on site being an amendment to Planning Permission Reg No AA/190803 for refurbishment and alteration to existing industrial premises. The works consist of the following: Amended elevation treatment with revised parapet/eaves detail, window arrangement, doors, and louvers locations, cladding treatment, boiler and plant layout (included roof mounted air handling ducts), relocate air handling units, and water storage. Relocated and enlarged compressor room; revised Lean-To canopy; relocated external smoking area, extended ESB substation; amended bund Area. Amended car parking and bicycle areas in two phases to suits occupancy levels with associated amendments to external circulation and related changes to external drainage. All the above works and other minor alterations to existing industrial premises at Ashbourne Industrial Estate, Ashbourne, County Meath A84 ND23.

Demolition of existing pumphouse associated with the disused sprinkler system located in the south eastern corner of the site, demolition of existing ESB substation and the erection of a new larger 35 sq.m substation, provision of steel roofed structure to cover the existing bunded area located on the south western boundary, provision of a new HGV reduced level loading bay along gridline H on south eastern elevation, a 30 sq. m compressor room and air handling unit located adjacent to the compresser room at ground floor level on the south eastern elevation between gridlines 3,6/H. Provision of a lean-to pallet storage area between gridlines HL/3 and the location of a waste compactor unit at the end of the lean-to adjacent to L/3. Provision of a new 83 space carpark and associated new entrance roadway and security barriers including wire mesh fencing and gateways on the south eastern corner of the site. Provision of HGV loading door and roller shutter on the eastern elevation along gridline L. Provision of a smoking shelter at the junction of gridlines 6/H. Provision of a bike storage area adjacent gridline 8/2. Demolition of an existing raised roof area between gridlines EF/4, and provision of a raised roof area (3.6m above existing roof level) to accommodate internal craneage between gridlines EF/3.5,5.5, there will be 2 number Air handling units located on top of this raised roof projection. Further provision of a raised roof area to accommodate internal craneage between IL/1,3, there will be one number Air handling unit located on top of this roof. Provision of new external cladding to all areas where cladding exists already, provision of 27 new slit windows 4.5m wide by.8m high to provide high level lighting on the wall elevations of the factory both at high level and on the raised roof projections at high level, all located on main existing factory wall elevations and new roof projections. Replacement of all windows in the current administration block between gridlines AB/2,6 Provision of van loading bays between E, G/6. Provision of two wall mounted signs 33 sq. m in area, provision of water attenuation tanks under the carpark located in the north western corner of the site and also on the northern boundary to connect into existing surface water drain in the north west corner of the site, removal of existing water tanks from the corner of the building adjacent to gridlines 6/B. provision of a new fire escape door and steps along gridline 3.

Change of use from manufacturing to use for social/recreational activities of a religious body

The change of use from manufacturing use to use for warehouse /distribution/training room and ancillary offices and amenities and use of first floor for religious meetings on Sundays only

Change of use from vacant retail warehouse to motor showroom, on a site area of 696.6 s q m. The proposed development includes for internal alterations to existing floor layout to provide for car showroom, customer reception, offices, pre-delivery inspection / valeting, toilets and staff canteen. No increase in gross floor area arises and there are no changes to the elevations as part of the proposed development for the subject unit. The development includes all ancillary works to facilitate the development

Pargo Properties One Ltd. intend to apply for planning permission for a change of use from vacant café/restaurant to retail warehouse at Unit 17 and from storage area to retail warehouse in the Ashbourne Retail Park, Ashbourne, Co. Meath. It is also proposed to amalgamate Unit 17 and the storage area with Unit 18 to form one larger retail warehouse unit. The proposed development includes for a new fire exit door to the rear of the unit and internal alterations to the existing floor layout to provide for the proposed amalgamated retail warehouse unit. The proposed development will result in a total gross floor area of c. 850.5 sq.m. There are no changes to the front elevation as part of the proposed development for the subject unit. The development includes all ancillary works to facilitate the development.