Planning precedent report

Upgrade to the existing permitted sludge storage sump and bunded liquid waste storage area. This upgrade will consist of retention of an increase in height of the pre-existing reinforced concrete wall in order to raise the wall around the east, west and rear elevations to a uniform height of 2.64m, and permission for the construction of a single skin cladded roof to cover this storage area of 170sq.m, construction of single skin cladded sides from the top of the reinforced concrete walls at the east, west and rear elevations to the roof. The enclosure will remain open at the front elevation. The covered area will slope from a height of 6.49m at the front elevation to a height of 3.92m at the rear elevation. The activity being carried out at the site is one that requires an Industrial Emissions Licence from the EPA.

Demolition of the existing warehouse and ancillary office space (c. 459sq.m) and 2 curtain sided storage racks (c. 46sq.m) and the provision of a new warehouse with ancillary office space (c. 746sq.m) and associated development; The proposed warehouse will have a maximum height of c. 11.15 metres; Minor repositioning of an internal gate; The rearrangement of the car parking spaces comprising a reduction from 10 to 7 car parking spaces (including the provision of an accessible parking space); Bicycle parking; The provision of a sectional door on the north-east elevation; External signage; Rooflights; Lighting; Boundary treatments and all associated site development works above and below ground.

Change of use of 147sq.m of existing ground floor warehouse area to a food production area including new extract duct taken through the roof from proposed cookline canopy and new grease trap together with all associated site works.

Installation of 279 solar PV panels on the roof of the Eatto building.

A new storage lobby extension to the side/rear of the Eatto building, Unit 220.

1) The erection of a 2.3m high black palisade fence to the north, east and part of the west boundaries 2) Remove the foyer and rebuild a new one: a sloping roof with a height not exceeding 3380mm, a width of 3680mm, and a depth of 2630mm 3) Within the company courtyard, approximately 700 square meters of asphalt pavement is laid around the main building 4) Erecting company signage on the main building overall size 0.9m x 18.75m 5) Add 19 No. street lights within the company forecourt 6) Install two electric gates 7) Add metal lines above the roof of the main building 8) Repainting exterior wall paint 9) Replace all doors and windows of the main building, the outer frame color of doors and windows is gun grey 10) On the southeast side of the main building, establish a 4700mm wide and 3100mm high billboard.