Proposes to carry out the following development; The refurbishment of Drumgeely Neighbourhood Centre. The proposed development will include: 1) Removal of all existing walls, flower beds and hard surfaces. 2) Install new level access surfaces to the entire public realm area including paving, low level vegetation and grass lawn areas, incorporating Sustainable drainage system (SuDS). 3) Installation of seating areas, benches, covered canopy area and bicycle parking stands. 4) Provision of two Accessible Disabled Parking Spaces and ten car parking spaces on the perimeter of the site. 5) Provision of public lighting and low-level ambient lighting. 6) Construction of a raised flower bed re-using the natural stone from the existing raised grass area. 6) Connect to existing onsite drainage services. 7) The installation of associated signage. 8) All ancillary site works. In accordance with the Habitats Directive, Clare County Council has carried out Appropriate Assessment Screening on the project. An Environmental Impact Assessment (EIA) screening determination has been made and Clare County Council concludes that there is no real likelihood of significant effects on the environment arising from the proposed development and as such an EIA is not required.

For construction of an external refuse store at Bay 89.1, Shannon Free Zone West, Shannon, Co. Clare. The proposed works will include construction of a louvred refuse enclosure to the south of the existing building together with all ancillary site works and servies

For the following development on the site, consisting of; construction of a new 47 m2 bunded modular extension including an underground bund, A new external covered solvent storage area and bund, New concrete yard, New access landing, ramp, steps & railings, Removal of an existing LPG tank, and All ancillary site development works and services to facilitate the development including drainage, and utility connections. The proposed development site is controlled by an Industrial Emissions Licence (No. IEL P0020-03) authorised by the Environmental Protection Agency

For the following works, (a) Modify the internal layout and make changes to the elevations of both the existing dwelling and granny flat. (b) Construct extension to rear and porch to front of dwelling, and (c) Construct extension to side of granny flat, all with associated site works

For the Demolition of existing industrial/office buildings within Bays 77 and 79 of the Shannon Industrial Estate and associated site clearance works along with all other associated site works to allow for future development on the site at Caherteige and Drumgeely Td

To: construct of 1 no Advanced Technology Manufacturing Unit. The building consists of a single storey high-bay industrial floor with ancillary office area and roof plant. Site works consists of the provision of an enclosed service yard with dedicated plant and refuse storage compound, rainwater harvesting tank and new sub-station, cycle parking and external landscaping, along with all associated site works, services and signage. Demolition of existing sub-station. The Building will replace the existing structures on site, the demolition which was granted under planning reference no P19-822.

For development which will consist of alterations and amendments to the elevations, external finishes and site works previously permitted under Planning Reference No P20/575

For development which will consist of the provision of a 2-storey dwelling house (237 sq.m), garage (45 sq.m), wastewater treatment plant, new access to the public road and all associated and ancillary works

For the construction of a private dwelling house, detached garage, wastewater treatment system with percolation area, recessed site entrance and all ancillary site works

For the installation of smart traffic lights and pedestrian crossings with all associated site works, at the four-way junction between Blocks N, O, Q & P

The development consists of the demolition of an existing carparking area and the relocation of an existing ESB substation to facilitate the construction of a four-storey office building with a gross floor area of 5636m2. Other works include the provision of 317no. carparking spaces including accessible spaces, EV charging areas and set-down areas, a relocated vehicular access to the site, an additional vehicular access point to ancillary parking on the opposite side of the road with a pedestrian crossing connecting both. Secure bicycle parking spaces, refuse store and plant and services building, incorporating the relocated substation. Signage and wayfinding, services plant and photovoltaic units to roof level with all landscaping and associated site works & services The planning application is accompanied by a Natura Impact Statement

For the construction of works to include, reconfiguration of the existing South West elevation to provide an external canopy, signage on the building, roof level plant enclosure, a new pedestrian door to northwest elevation and a single storey switchroom and substation to rear of building in the yard space with all associated site works

For development at Precision Engineering Ltd., Block O109, Shannon Industrial Estate, Shannon, Co. Clare. The development will consist of proposed roof-mounted photovoltaic, PV, panels on the existing profiled metal roof and all associated siteworks

Of (a) conversion of former garage to accommodation (b) construction of attached garage & (c) fenestration changes to the front & rear elevations, together with all associated site development works and services

For the demolition of existing industrial / commercial building within Bay 70 of the Shannon Industrial Estate and associated site clearance works along with all other associated site works to allow for future development on the site

For development which will consist of the provision of, overall c.521 Sq. M. or 145. kWp output of roof mounted Solar PV array. A glint and glare assessment will be submitted with the application

For completion of construction of dwelling previously granted permission under planning application P03-1691 with all ancillary site development works and services

The development consists of the demolition of an existing common overflow carparking area to facilitate the provision of a light industrial facility with ancillary office space, yard spaces, refuse stores with carparking, bicycle parking, ESB substation, switch room and associated site works. PERMISSION is sought for the industrial and office facility to have the flexibility to be subdivided as follows: Option A: One No. Unit (Area: 5886m2) with Ancillary Yard and Refuse Store. Option B: Two No. Units (Units 01 Area: 3913m2) (Unit 02 Area: 1973m2) with Two No. Ancillary Yards and Two No. Refuse Stores. Option C: Three No. Units (Area Unit 01: 1973m2 / Area Unit 02: 1940m2 / Area Unit 3: 1973m2) with Three No. Ancillary Yards and Three No. Refuse Stores. Other works include the provision of 156 no. carparking spaces which include accessible spaces, EV charging areas and set-down areas with vehicular and HGV access points to the perimeter of site. Secure bicycle parking spaces, refuse stores with roof level and site level external services areas, building signage with all ancillary landscaping and associated site works and services. The planning application is accompanied by a Natura Impact Statement

For the RETENTION and COMPLETION of relocation of the single storey services building with a generator/transformer compound and the alterations to the previously granted permission (Planning Ref: P24 – 60531) comprising of revisions: Extension to existing yard, removal of car spaces to adjacent carpark and relocating existing palladian fence to the new yard space edge. The proposed development also includes the addition of 2 No. external dock ports, minor amendments to internal configuration and omission of previously proposed external mezzanine plant decks. Note: there is no increase in floor area. Works also include all associated site development works

The development consists of the alterations to the previously granted permission (Planning Ref: P21 – 503) comprising of revisions including: a reduced office area with new production floor welfare facilities (77sqm), relocating external palladian fence to the yard space, new single storey services building with a generator/transformer compound adjacent to existing substation. The proposed development also includes the addition to the existing service yard of a new sprinkler tank and pump station, 2 no. new dock levellers, two new roller doors, alterations to internal road, two no. external packaged plant units (16m x 3.8m each) and a new two storey external plant structure to house air handling units, plant and containment enclosure. Note: there is no increase in floor area, the mezzanine grid floor supports additional plant only. Works also include all associated site development works with minor amendments to existing carparking layouts.

To erect 3,074.00 m2 or 564.64 kWp of photovoltaic panels on four roofs of our campus, with all associated site works. We are going to install solar panels on the roof, of Block T (55-56), Block T(57-59), Block V (160-161) and the new existing building of our campus, A glint and glare assessment will be submitted with the panning permission application

For the construction of a new lift facility and all associated works

For an extension to the existing metal fabrication workshop together with all ancillary works. A Natura Impact Statement (NIS) will be lodged as part of this application

To construct dwelling house, garage, waste water treatment system, percolation area, entrance and all associated site works

For development which will consist of the construction of a dwelling house, a proprietary waste water treatment system and ancillary site works

To construct dwelling house, garage, waste water treatment system, percolation area, entrance and all associated site works

For development comprising: 1) the demolition of existing side and rear extensions to existing cottage, 2) demolition of existing garage and shed, 3) decommission and removal of existing septic tank, 4) to construct new side and rear extensions to the cottage, 5) construct a new domestic garage, 6) to install a new wastewater treatment system and polishing filter, and 7) construct a new stone roadside boundary wall including all associated site works

To construct 60 no. dwelling houses comprising 4 no. detached houses, 20 no. semi-detached houses and 36 no. duplex units and all associated site works and services including a playground and road re-alignment. A Natura Impact Statement (NIS) has been included in the application

For development which will consist of the demolition of eastern two-storey side extension, the partial demolition of western conservatory and the erection of replacement single and two-storey side extensions, internal alterations including minor reconfiguration, replacement of exterior windows and doors, exterior repairs and all associated site works at Ballycar Station House, a protected structure (RPS No:642)

The development consists of alterations to the existing elevations of:- Bay 135, with the construction of 15sqm new floor area with subdivision into 3 no. Advanced Manufacturing Units- Consisting of a single storey high industrial floor with ancillary office area - bay 137 with subdivision into 4 no Business Technology and Innovation Units. Other works include alterations to the existing site layout with a new access road to serve Bay 135 units, the provision of 25 no new car parking which include accessible spaces, set down area with vehicular and HGV access point to the perimeter of site. Secure bicycle parking spaces, refuse stores with roof level and site level external service areas, building signage with all ancillary landscaping and associated site works and services. The Planning Application is accompanied by a Natura Impact Statement

For development at Bay 135 and 137, Shannon Free Zone West, Shannon, Co. Clare. This application is an amendment to previously approved planning application reference no. 21/611, and consists of the following:- Bay 135 - Incorporation of existing ancillary toilet areas into this unit and the subdivision of the floor area from 3 to 2 no. Advanced Manufacturing Units. - Bay 137 - Subdivision of floor area to provide for two potential layout options as follows: Option A: Subdivision from 4 to 3 no. Business Technology and Innovation units (Unit 01 Area: 516m2) (Unit 02 Area: 342m2) (Unit 03 Area: 520m2) Option B: Subdivision from 4 to 2 no. Business Technology and Innovation units (Unit 01 Area: 864m2) (Unit 02 Area: 520m2). Works include associated elevational changes. Other works include alterations to the existing site layout with reduction of provision of new carparking spaces from 25 to 18 no. The planning application is accompanied by a Natura Impact Statement.

To construct dwelling house, garage, entrance and all associated site works

For extension to Centre of Excellence Building at EI Campus, Shannon Industrial Estate, Shannon, Co Clare. The development consists of the demolition of an existing services yard and enclosing walls to facilitate the construction of a two-storey Gym facility connected to the existing building. Including external services area and all associated site works

For the demolition of existing industrial/ commercial building at Bays 40 and 41 along with the partial demolition of Bay 39 at the Ei Electronics Campus, Shannon Industrial Estate, Shannon, Co Clare and all associated site clearance works along with all other associated site works to all for the future development of the site

For repair and refurbishment to a localised area of an existing car park to be repurposed as an Aerial Mobility Research Hub. Works to include one number ancillary office and perimeter fencing with all associated site works and services

For the construction of an internal first floor mezzanine to the Northeast and Southwest sides of Building 3, Block, Airport Avenue, Shannon Free Zone, Shannon, County Clare. The proposed mezzanine floor of 885m2 will house offices, laboratories and plant. The existing ground floor will house offices, clean rooms, storage and associated welfare facilities. The development also consists of alterations to the existing roof to provide permanent stair access for maintenance and associated site and services works

For the development of an extension to the existing light-industrial manufacturing facility, consisting of a single storey of high bay warehousing with ancillary office, manufacturing, and R&D areas over 3 storeys resulting in a combined 5100m² of new floor area, with screened roof level plant. The development will include the provision of 3 no. ramped loading bays, 3 no. at grade loading doors and associated construction and upgrade of ancillary yard/marshalling areas, as well as the inclusion of a fire suppression storage tank and associated pump house, building signage, upgraded campus entrance signage and all ancillary landscaping, site works and services. The building is to replace the existing structures on site, the demolition of which was permitted under Pl.Ref no: 23/552.

For development at this site in the townlands of Clonloghan and Caherteige, Co. Clare. The proposed development consists of an amendment to Condition No. 4 of the previously approved parent planning permission (Planning Ref. 18585), which relates to the operational life of the development. The proposed amendment seeks to extend the operational life of the permitted development from 25 years to 37 years. This development is covered by the provisions of the Renewable Energy Directive III (Directive (EU) 2023/2413) and it is important to note that the planning application may be subject to section 34D of the Planning and Development Act 2000, as amended. When a notice issues in accordance with section 34D(b), the provisions of article 26A of the Planning and Development Regulations 2001 to 2025 shall apply

For development consisting of the alterations of approved signage with the relocation of 2 of the 3 signs to Building 3 indicated in the original planning application. The proposed signs are to be illuminated and are 8m x 1.6m (L x H) and feature the company logo, name and are of the same size as the signs indicated in the original planning application ref: P18912

For alterations to existing dwelling to include an attic conversion with dormer windows, velux rooflights and solar panels, new open entrance porch and stairwell, garage/store, a new boundary wall with splayed vehicular entrance, gates and piers, connection to existing mains water sewer and all associated site works

For a period of 3 years for the provision of single storey prefabricated temporary office accommodation and all associated site development works

For the construction of three external monolith signs to the perimeter of Buildings 2 and 3 and one fixed sign to the service yard of Building 2,

For the extension of the services yard at Building 2, Block K, Airport Avenue, Shannon Free Zone, Shannon, Co Clare to accommodate a new gas compound, pipe rack and all associated site development works. The development will also consist of alterations to the existing car parking bays to the southeast of the site

For development of a 110m2 extension to the southeast corner of the existing hangar building to facilitate G700 aircraft, including all associated site works

For the construction of a two storey external plant structure and single storey external bin store within the existing service yard

Of an agricultural structure and all associated site works

For the construction of an internal first floor mezzanine to the North East, North West and South West sides of Building 2, Block K, Airport Avenue, Shannon Free Zone, Shannon, County Clare. The proposed mezzanine floor of 1517m2 will house laboratories and plant. The existing ground floor will house offices, clean rooms and associated welfare facilities

For alterations to the existing south west elevation and works to the existing roof at Building 2, Block K, Airport Avenue, Shannon Free Zone, Shannon, County Clare. The works to the façade include the addition of fresh air intake louvres, alterations to the existing roller shutter doors and the addition of an external canopy. The works to the roof include the provision of additional roof cowls and access hatches

For development consisting of the alterations to the approved signage indicated in the original Building 2 planning application, to omit two of the four signs and to illuminate the remaining two signs. The proposed signs are 8m x 1.6m (L x H) and backlit. The proposed signage features the company logo, name and are of the same size as the ones indicated in the original Planning Application Ref: P18912.

The development consists of the alterations to the previously granted permissions (Planning Ref: P20/478 & P20/416) comprising of revisions including, the relocation of the external enclosed yard from an East/West orientation to a North/South orientation, relocating louvres to the elevations to suit servicing requirements, amending the roof layout & positions of roof cowls and several internal layout amendments to the PMU Warehouse area of the plan. Note: there is no increase in floor area, the mezzanine grid floor supports additional plant only. The proposed development also includes the addition of a new canopy structure above a new entrance to the South West Elevation, a new roller shutter door, a new window and external door to an office space and obscure glazing for privacy along the North West Elevation