The change of use from warehouse to data repository facility, alterations to external facades, provision of a new 1100mm parapet, reclad roof, internal alterations, refurbishment of the existing office space, solar panels at roof level, external plant at ground and roof levels and equipment to include 12 condenser modules, an emergency back-up generator and associated fuel storage tank, transformer, extension to the existing sub-station (c. 13sq.m), 2 sprinkler tanks and pumphouse, bin store, 22 parking spaces including 2 electrical vehicle charging points, bicycle parking shelter, landscaping, planting, new security fence, external lighting, CCTV, altered vehicular gates, permeable hard surfaces, alterations to internal foul sewerage and water supply networks, provision of SuDS compliant surface water drainage system and all associated site works.

Demolition of an existing bungalow including removal of existing septic tank, along with existing walls and entrance piers on Ballymount Road; Construction of 3 no. two storey plus attic floor (3 floors total) four bedroom houses (detached and semi-detached) on Ballymount Road, all with roof-lighting and a replacement, detached, five bedroom house to the (rear) west (backing on to Ashfield Avenue) that is 2 storeys plus attic floor (3 floors total) also with roof-lighting, accessed via a private laneway from Ballymount Road; Removal of the existing vehicular entrance on Ballymount Road and the formation of 2 new vehicular entrance driveways and 1 no. vehicular entrance accessing the rear house; A new wall boundary to the west (facing Ashfield Avenue); Ancillary works, parking, a new pedestrian gateway from the site opening onto the pavement between Dunmore Grove and Ashfield Avenue, services and utilities, drainage, site development works and associated landscaping.

Demolition of an existing bungalow including the removal of an existing septic tank along with existing walls and entrance piers on Ballymount Road; 4 two storey plus attic floor (3 floors total) semi-detached houses to the western end of the site (backing on to Ashfield Avenue); 2/3 storey block on Ballymount Road containing 5 apartments (1 one bed and 4 two bed units), including a shared lobby and a bicycle store at ground level; ancillary works, parking, services and utilities, drainage and site development works, bin store, central grassed area and associated landscaping, miscellaneous roof lighting and on Ballymount Road a re-positioned access, along with a new pedestrian/cyclist gate access to the apartments.

Amendments to the previously permitted residential development (File Register Reference Number SD24A/0029). The proposed amendments to the permitted development consist of A) The construction of a 12sqm extension to the permitted ground floor of House No. 4, B) The amendment of the permitted first floor layout and associated roof layout of House No. 4 resulting in the extension of the main roof profile over part of the northwest corner of the first floor and replacing the permitted dormer accommodation. This proposed amendment will also result in the reduction of the permitted first floor area by 12sqm and the lowering of the roof height over the proposed ground floor garage construction, C) The inclusion of two number attic gable windows in the proposed northwest elevation of House No. 4 facing Ashfield Avenue.

Retention permission for the construction of a single storey side and rear extension to existing detached single storey house as constructed and all associated site works.

Construction of a single storey side and rear extension to existing detached single storey house and all associated site works.

Extension to existing dwelling consisting of extension to rear of 57sq.m; conversion of attic into 2 bedrooms and ensuite bathroom with 3 dormer windows facing into garden of dwelling by raising the roof by 1.375m and extending the building to rear by 5.45m resulting in an increase of the area of the building from 52sq.m to 162sq.m.

Conversion of existing attic space comprising of modification of existing roof structure, new gable window, new access stairs and flat roof dormer to the rear.

Erection of a perimeter steel fence to match existing fence as erected on neighbouring property 2.5m high and the installation of a new electronically controlled entrance gate set back approx. 13m from road side 2.1m high.

A self-storage facility (for a temporary period of three years) comprising 40 no. 20 foot long shipping containers (14 sq.m. each)

Planning Permission sought for proposed two storey pitched roof extension to side (floor area = 12.17sq.m) with a proposed ridge height of 6.935m high, complete with first floor bedroom window to side/N.West elevation & 2no. 'velux' roof lights to front/S.West elevation together with associated site works

Demolition of existing single storey rear extension. Construction of new single storey flat roofed extension to consist of a kitchen, Lounge & utility room. Construction of a new ground floor single story flat roof extension of the front of existing dwelling to consist of porch and extended living room. Construction of a new rear first floor flat roof extension to consist of a bedroom. Construction of a new flat roof rear facing dormer window to attic room for use as a home office/study. Genera; remodel and upgrade of the main dwelling to suit the proposed layouts. Modification to existing front boundary treatment and vehicular access including a new front boundary treatment and vehicular access onto Forest Avenue Kingswood Tallaght Dublin 24. All drainage, structural and associated site works to be implemented

Permission for the proposed green energy initiative development consisting of the installation of Photovoltaic Panels on the existing roof structures together with all associated site works

Planning permission is sought by The KSL Clinic (Ireland) Limited at Unit C15 The Exchange, Calmount Park, Calmount Avenue, Dublin 12, D12 NT29 for the change of use from existing Offices (class 3) to mixed-use of commercial Offices (class 3) / Medical Use (class 8a; Health Centre or Clinic). Works will include internal works only.

Attic conversion with projecting dormer window to rear roof and 2 no. velux windows to front roof, new study / storage facility, and all associated site works.

The development will consist of change of use from Retail use to retail use with ancillary off licence use

A new storage lobby extension to the side/rear of the Eatto building, Unit 220.

Installation of 279 solar PV panels on the roof of the Eatto building.

The development will consist of the construction of a roofed extension (approx. 450 sqm), to incorporate forklift movements to the packaging area of the existing factory and associated site works to include access doors to existing buildings and demolition of existing storage sheds.

Two storey extension to rear of existing building to accommodate additional vehicle service bays on the ground floor and additional office space and ancillary accommodation on the first floor.

1) The erection of a 2.3m high black palisade fence to the north, east and part of the west boundaries 2) Remove the foyer and rebuild a new one: a sloping roof with a height not exceeding 3380mm, a width of 3680mm, and a depth of 2630mm 3) Within the company courtyard, approximately 700 square meters of asphalt pavement is laid around the main building 4) Erecting company signage on the main building overall size 0.9m x 18.75m 5) Add 19 No. street lights within the company forecourt 6) Install two electric gates 7) Add metal lines above the roof of the main building 8) Repainting exterior wall paint 9) Replace all doors and windows of the main building, the outer frame color of doors and windows is gun grey 10) On the southeast side of the main building, establish a 4700mm wide and 3100mm high billboard.

Erection of 2 two storey industrial units adjacent to existing S1 unit comprising of warehouse, office and toilet at ground floor level and proposed storage to mezzanine floor level; alterations to external area/existing car park and all associated site works.

Replacement of existing asbestos roof covering with a new Kingspan insulated roof panels; replacement of rooflights with new and installation of a roof mounted solar photovoltaic panels to include all ancillary works and services.

Installation of a new canopy roof to the south side of the existing Heiton Steel warehouse and all associated site works.

9.1m high Gas Cylinder Storage Building with a ground floor area of 519sq.m and elevations finished with grey trapezoidal cladding panels and rendered blockwork, together with ancillary site works.

Demolition of attached garage and construction of a new one and a half storey dwelling; connection to main sewer and connection to all associated services.

The reconfiguration of 47No existing staff car parking spaces to allow for safer movement of vehicles and temporary storage of materials elsewhere in the existing yard, including new staff vehicular and pedestrian entrances and other associated minor works which are similar to what is currently permitted as part of a more substantial development Reg Ref SD19A/0222

Removal of existing front boundary wall and right hand side pillar. Rebuild pillar in new Location. Additional pavement dishing and replace grass lawn with gravel finish.

Construction of a new two storey, three bedroom detached house to side of existing house including a new vehicular entrance, car parking for two cars, dishing of kerb, new boundary walls and all associated site works.

The creation of a 62sq.m ground floor industrial unit to be known as Unit 2B2 that previously formed part of industrial unit 2B2A.

The development will comprise the following: Demolition of existing commercial/industrial buildings on site (c.6,711 sq.m in total). Provision of a mixed use, residential and commercial/employment development (c.49,275 sq.m GFA excluding undercroft) within 4 no. blocks ranging in height from 6 to 10 storeys. The development will provide 436 no. apartments (all with individual private open spaces) consisting of: 2 no. studios, 180 no. 1-beds, 158 no. 2-beds and 96 no. 3-beds. The development will also include: internal residential amenity spaces (c.375.3 sq.m in total); community library (c.352.1 sq.m); creche (c.359.1 sq.m), and 4 no. commercial/employment units (c.1,226.6 sq.m) comprising 2 office/co-working units (c.435.8 sq.m in total), medical centre (with ancillary pharmacy)(c.674.1 sq.m) and café (c.116.7 sq.m). • Block A - 9 to 10 storeys in height and will provide 81 no. residential units. • Block B - 9 to 10 storeys in height and will provide 137 no. residential units • Block C - 8 to 10 storeys in height and will provide 85 no. residential units • Block D - 6 storeys in height and will provide 133 no. residential units. Upgrades to the western side of the Parkmore Estate Road and along the Long Mile Road and Robinhood Road to provide a variety of pedestrian/ cyclist access points to the development and with vehicular access provided from the Estate Road with associated upgrades to the Estate entrance. The development will also include 173 no. car parking spaces within 2 no. undercroft car parks on site and including 12 no. parking spaces (for the commercial units) along the Long Mile Road frontage. Provision of 1,040 cycle parking spaces. Provision of public and communal open spaces, landscaping, boundary treatments, plant areas, waste management areas, and services provision (including ESB substations), and all associated works required to enable this development including connection to the Uisce Eireann network. A Natura Impact Statement (NIS) has been prepared in respect of the proposed development.

Change of use from motor storage to motor retail showrooms (total area 629sq.m), to include new car showroom and ancillary offices at ground and first floor levels and a motor servicing workshop (total area 483sq.m). New showroom glazing to the northern elevation. Carparking and associated site works. New building signage and a free standing totem sign to the northern boundary and ancillary site development works.

Alterations to existing hip roof to incorporate a 'Dutch' half-hipped roof design with attic stairs to allow conversion of attic into non-habitable storage space and installation of two velux windows to the front elevation at 15 Ashfield Avenue, Kingswood Heights, Tallaght, Dublin, D24XK5K

Construction of a new industrial unit for storage and office purposes, the relocation of an existing fire escape door on existing Unit D1, and all associated site works.

Attic conversion for storage. With a raised gable to the side and dormer window to the front and the rear, a new gable window.

Demolition of existing light industrial building (formerly known as Acoustic House) totalling 1,742sq.m; provision of new hardstanding areas and use of the former Acoustic House site as part of the adjacent Frank Keane Motors site to provide for used vehicle display; compound parking; customer parking; service parking; demo parking; construction of a 6 bay car wash and valet facility (244sq.m) located at the western boundary of the site; all associated boundary treatments and all associated site and development works on a site (1.3889ha) at Frank Keane Motors and adjacent premises formerly known as Acoustic House (vacant).

Construction of external free standing dock leveller for 2 trucks and associated ramp within rear yard, The dock leveller is open on 2 sides and clad with Insulated metal cladding on the other 2 sides. Works include a sunken pit appx 650mm below yard level.

Extension of 352sqm to the existing car workshop located to the rear of the existing car showroom to provide additional car servicing, valet and wash bays. Reconfiguration of the adjoining external compound car storage area, including the removal of 16 storage car parking spaces to accommodate the proposed extension, revised and extended building elevations and all associated site development works.

Removal of existing ground floor porch structure and chimney to side elevation; construction of new single storey extension to the front and side elevations; construction of a new single storey extension to the rear elevation; construction of a new first floor extension to front elevation; alterations to existing first floor structure to allow for a revised pitched roof design with a roof light and rooflight to rear roof slope; installation of external insulation to existing dwelling and proposed new elements; all associated internal alterations, demolitions, site boundaries, landscaping, drainage and ancillary works.

(i) change of use of existing premises from car dealership to warehousing/distribution facility with associated internal alterations to facilitate use; (ii) provision of new fascia signage on the front/north-west elevation; and (iii) all associated ancillary works necessary to facilitate the development.

(i) partial change of use of existing building, which comprises a warehouse with ancillary offices and archive storage, at ground floor level only to provide a product display showroom (66sq.m), 2 no. service repair rooms (104sq.m total) and the reconfiguration of the ancillary office space with associated internal alterations to facilitate; (ii) reconfiguration of internal layout at first floor level with no change to ancillary office space at this level; (iii) provision of new fascia signage on the front/north-west elevation; and (iv) all associated ancillary works necessary to facilitate the development. The revised building will provide 528sq.m of warehouse space (reduced from 745sq.m) and 366sq.m of ancillary office space (increased from 319sq.m).

Demolition of the existing warehouse and ancillary office space (c. 459sq.m) and 2 curtain sided storage racks (c. 46sq.m) and the provision of a new warehouse with ancillary office space (c. 746sq.m) and associated development; The proposed warehouse will have a maximum height of c. 11.15 metres; Minor repositioning of an internal gate; The rearrangement of the car parking spaces comprising a reduction from 10 to 7 car parking spaces (including the provision of an accessible parking space); Bicycle parking; The provision of a sectional door on the north-east elevation; External signage; Rooflights; Lighting; Boundary treatments and all associated site development works above and below ground.

Retention permission and permission for development at the existing shotblasting facility. The total planning application site area extends to approximately 0.92 Ha. Retention permission is sought for: a 2 bay portal frame structure at the northern end of the facility and a 153 sq.m floor area extension at the southern end of the facility. Permission is sought for: a 716 sq.m floor area extension at the southern end of the facility; roof to enclose the 2 bay portal frame structure (for which retention permission is sought) minor changes to the internal layout including relocation of toilet and provision of ancillary office space; concrete resurfacing of the main yard area; minor elevational changes; and all associated site and development works above and below ground.

Retention for 2 bay portal frame, additional floor area to existing industrial unit. Permission for roofing of 2 bay portal frame structure; extension to existing industrial unit; construction of a concrete resurfaced area in main yard; minor internal layout and elevational revisions to existing industrial unit and all associated site works including underground surface water attenuation and related utilities and works.

Construction of a single storey flat roof and double pitch slope roof extension to the rear of existing dwelling; Internal & Elevational alterations to the existing house; New off-street parking; New landscaping, boundary fencing, drainage and associated site works

Use of the premises as a warehouse with ancillary trade counters (for the sale of building related products principally to trade); internal alterations include general reconfiguration of the space to create trade counters and warehouse space including new stairs and lift core; external changes include new entrance door and ramp at south west corner; new ramp and new entrance door at existing point of entry on the south elevation; on the west elevation placement of new condensers and minor alterations to the existing entry point; all ancillary works associated with the development.

Construction of a single storey extension to the rear and widen existing vehicular entrance.

Erection of signage on the front (southern elevation) of the building, including a trough light for external illumination of the sign at first floor level; reuse of the existing signage structure at the southern, roadside boundary of the site for user and directional signage; this will be a double sided sign; all associated works. The proposed signage relates to the use permitted under Reg. Ref. SD21A/0003.

Construction of a two storey motorcar retail showroom (c. 904sq.m); 2 floors of ancillary offices and associated uses; access to be provided from existing entrance the internal circulation road to the west; provision of 19 visitor and staff surface car parking (1 disabled access space, 2 electric vehicle charging spaces and 4 bicycle parking spaces); 89 spaces for the display and valet of vehicles, including display area; signage comprising 3 totem signs (2 x 6m and 1 x 7.5m in height) and 5 elevational signs (c. 20.19sq.m of signage in total); single storey substation and bin store as well as all associated infrastructure, landscaping and associated site development works including plant and PV panels at roof level all on a site of c. 0.59ha.

Retention for as constructed extended floor areas to ground floor level reception area (approx. 38sq.m) and first floor level office areas (approx. 49sq.m). Permission to construct a new extension to the north-eastern corner of a permitted storage warehouse building together with associated external signage, site development works; provide additional storage space at second floor level only (approx. 2,198sq.m) and form an undercroft to the permitted access/entrance areas.