Retention Planning Application to carry out the following developments to a permitted storage warehouse (Planning Reg. No.'s SD22A/0104, SD21A/0214, SD15A/0254), located at M50 Business Park beside the M50 Ballymount Interchange. The development will consist of (1) Retention Permission for as constructed extended floor area to first floor level storage area (approx. 200 sqm). (2) Retention Permission for as constructed additional stair core (Stair 05) and revised location and layout to permitted stair core (Stair 04). (3) Retention Permission for omission of solid masonry / RC wall to undercroft at north-east elevation. (4) Retention Permission for inclusion of a new pedestrian door to existing building, adjacent to main entrance door to reception area.

Construct additional floors at third and fourth floor levels internally as modifications to a recently permitted development under SD21A/0214 - extension of an existing storage warehouse building.

Front porch & toilet single storey extension; extend existing ridge tiles & hipped tiled roof to form a new Dutch type roof structure; two storey extension to the rear with a ground floor extension with a tiled roof over & a reduced floor area to the first floor extension with a flat roof; extend existing gable structure up to new soffit level; new door/window & three new obscure double glazed windows in gable; new attic conversion with new dormer roof structure in existing rear tiled roof; internal alterations; new external finishes to match existing & associate site works.

Attic conversion, raising of gable end to change roof profile with dormer projecting window to rear for playroom use/ storage and all associated site works.

Alterations to the building to facilitate the conversion of the existing Test Centre into a ''Drive - Through'' Test Centre in line with incoming RSA/CVRT regulatory policy. The alterations are mostly internal, including the re-positioning of partitions and the vehicular test equipment to facilitate the proposed 'drive - through' circulation route. Externally, there are alterations to the front facade including the removal of the glazed screen of the existing disused showroom and the insertion in that area of two new vehicular openings that will be similar to the one existing vehicular opening.

1 industrial storage building to the west of the main complex with an area of 465.3sq.m and a height of 8.8m; all associated site works and utility connections.

Retention of partial change of use from warehouse to office space to include Retention of additional first floor, second floor offices and meeting rooms also to include all associated site works to facilitate the development.

Demolition of existing extension and construction of single storey extension and dormer to the rear of existing dwelling and Velux rooflights to front of existing dwelling

Upgrade to the existing permitted sludge storage sump and bunded liquid waste storage area. This upgrade will consist of retention of an increase in height of the pre-existing reinforced concrete wall in order to raise the wall around the east, west and rear elevations to a uniform height of 2.64m, and permission for the construction of a single skin cladded roof to cover this storage area of 170sq.m, construction of single skin cladded sides from the top of the reinforced concrete walls at the east, west and rear elevations to the roof. The enclosure will remain open at the front elevation. The covered area will slope from a height of 6.49m at the front elevation to a height of 3.92m at the rear elevation. The activity being carried out at the site is one that requires an Industrial Emissions Licence from the EPA.

The retention of the change of use for the portion of site highlighted on the accompanying drawings into commercial use for the sale of motor vehicles. The retention of the additional staff cabin accommodation of 48.77 sq.m gross floor area, clad in aluminium to selected colours to match the adjacent main car showroom building The retention of the following site works; creation of new hard standing areas for the parking of cars, the construction of a new retaining wall boundary with railings over to the east, the erection of new palisade fencing and gate to delineate the new from existing site, removal of existing foliage The retention of building signage displaying company name and logo of 4.2 sq.m

Attic conversion with raised gable; dormer and single storey extension to the rear; side window with new gable; Two 'Velux' windows to the front.

Conversion of existing attic space comprising of modification of existing roof structure, raising of existing gable c/w window, new access stairs, 2no. roof windows to the front and flat roof dormer to the rear

Change the roof profile of the house from a hip to Dutch hip with new part gable type roof at attic level to the side of the house and to carry out an attic conversion for a non-habitable storage room with roof windows to the rear and a rear facing dormer with window to the rear of the main roof and associated internal works in this semi-detached two storey house

Demolition of existing Office/Showroom and replaced with car parking; new boundary wall/railings and bollards with decorative chain to match existing, to replace existing boundary treatment to existing car display area, to southwest of site at Naas Road Autos.

Alterations to existing hip roof to side to create a gable roof to accommodate attic stairs to allow conversion of attic into non habitable storage space with dormer to rear. Frosted window to side gable with roof windows to front roof. Single storey extension to porch, bay window to front and all ancillary works.

Retention of erection of fence and gate enclosing lands with vehicular access to the Long Mile Road.

Permission for 3 years for a temporary cafe/retail unit on a vacant plot of land on Long Mile Road. The development will consist of one converted bus two storeys in height. Related works include new paving and the construction of a new fence and gates.

Retention of constructed fence and boundaries and the relocation of existing access gate to revised location and proposed use of space as an allotment.

Retention of constructed fence and boundaries and the relocation of existing access gate.

The retention permission of all new shed walls at ground & first floor level that are connected to existing shed at rear of site and roof of shed.

Permission for a new first floor extension with new roof and roof windows to shed at rear of site and all associated site works; Retention of all new shed walls at ground floor and first floor level only that are connected to existing shed at rear of site and all associated site works.

Retention permission for new sectional door; 5m high by 3.9m wide; to the south-east elevation of an existing building.

Construction of a single storey side extension to existing single storey detached national school; minor internal and façade amendments to existing school including new accessible access door arrangement and all associated site works.

Works to a commercial warehouse to include demolition of existing extension and ancillary accommodation, internal alterations including general reconfiguration of the space to create ancillary office accommodation, trade counter and warehouse space, external alterations include installation of new cladding system, signage and reconfiguration of existing south and east elevations, all ancillary works associated with the development.

Revision to existing permission (SD24B/0505W) Ground floor partial side/front with porch, rear extension, partial raising of roof ridge height and build-up of walls at front and rear to create attic conversion, (revised larger size) with dormer roof windows on both side roofs, and window at attic level in front & rear elevation, new home office/store to rear garden, internal modifications and associated site works.

Ground floor partial side/front with porch, rear extension, partial raising of roof ridge height and build up of walls at front and rear to create attic conversion, with dormer roof windows on both side roofs, and window at attic level in front elevation. internal modifications and associated site works.

Ground floor rear extension with pitched roof over & 2 No roof lights over & ground floor extension with pitched roof over

2 industrial storage buildings to the west of the main complex; Building no. 1 - 460sq.m with a height of 8.8m; Building no. 2 - 244.4sq.m with a height of 7.0m; all associated site works and utility connections.

Single storey CNG (compressed natural gas) compressor installation with a floor area of 19sq.m; covered shelter with a floor area of 30sq.m and a 2.6m high boundary wall around the site with all ancillary services and associated site works.

Semi-detached two storey private dwelling adjoining existing two storey family home with all ancillary works.

Retention of Change of Use from Light Industry / Warehousing and Ancillary Office to Office, and Retention of Amalgamation of Unit E1 (total G.I. area of 317.40m²) with Unit E14 (total G.I. area of 294.50m²), to achieve a total amalgamated area of 617.4m², all located at Block E, Calmount Park, Ballymount, Dublin 12, D12 X854.

A porch extension to front of existing, a single storey ground floor extension to rear of existing house, 2 bedrooms at proposed 1st floor Level, with windows to front and rear with dormer windows to sides with opaque glazing roofing with standing seam with black metal finish.

Planning permission for a proposed change of use of 3,875 sq.m. floorspace from office-based industry to office use. The proposed development also includes reconfiguration of car parking area resulting in replacement of 4 no. existing car parking spaces with 40 no. bicycle parking spaces, along with all associated site works to facilitate the development.

Retention permission for 2 storey extension to rear of existing house, proposal for a new window to side of existing house all with associated ancillary works

Side first floor extension for an additional bedroom; raise roof of single storey extension to the rear; two windows to the side of new first floor bedroom.

An attic conversion to hobby room with alterations to the existing tiled hip roof, construction of a 'Dutch' style gable hip roof to the side and a new dormer roof extension and window to the rear, internal alterations to layout, new internal stairs, roof lights to the front & side and all associated site works.

Front porch and pitched canopy at front and side. Retention of existing single storey extension at side.

Extend the existing service workshop to provide additional service bays and covered secure parking.

Extend the existing service workshop to provide additional service bays and covered secure parking.

Attic conversion for storage. With a raised gable to the side and dormer window to the front and the rear, a new gable window, First-floor extension to the rear.

Conversion and extension of the existing garage structure and construction of a new link to the existing single-storey four-bedroom house, to provide a single-storey one-bedroom family flat with kitchen/ living area and outdoor area; construct an additional pedestrian gate in the existing garden wall, to install photovoltaic solar panels to the roof of the house and to complete some ancillary site, landscaping, and drainage works.

Retention permission is sought for an external, timber framed, flat roof, covered seating area (15.8m²) to the rear garden at side.

Construction of 6 warehouse units with associated offices, associated signage for each unit, boundary treatment, associated drainage and ancillary siteworks.

Erect 525sq.m. of photovoltaic panels on the roof of existing unit with all associated site works.

(I) Change of use of ground floor (1,002 sq.m gross) from wholesale light manufacturing uses for the clothing trade to light industrial with ancillary testing area (fitting rooms, club building workshop putting and chipping greens and fitting bays) for sports equipment manufacture and an area of display of golf equipment and clothing/accessories for wholesale, together with associated/ancillary reception area, refuse storage, bicycle parking (5 no. spaces) and circulation.(ii) Provision of a new first floor of 833 sq.m gross for use as light industrial use to facilitate electric buggy repair (428 sq.m) and staff canteen (75 sq.m), together with associated/ancillary circulation (iii) Provision of a new second floor of 810 sq.m gross for use as storage, including plant. (v) Minor amendments to roof to facilitate AOV's and air extract ducts (vi) 1 no. new non-illuminated sign of 20.2 sq.m on the south-west (rear) elevation and 1 no. illuminated (blacklit) sign at fascia level to the north-east elevation 2.15 sq.m.

Increased width drop kerb at the edge of the public road, in front of the house, for additional vehicular access to the off-road parking area in the front garden of the house.

Conversion of existing attic space comprising of modification of existing hipped roof structure to form a gable end design; construction of flat roof dormer to the rear with dormer windows and new internal access stairs.

(i) A Single-storey extension to the existing kitchen annex and (ii) A flat roof attic dormer extension. All works are to the rear of the house.

Change of use of 147sq.m of existing ground floor warehouse area to a food production area including new extract duct taken through the roof from proposed cookline canopy and new grease trap together with all associated site works.

Ground floor partial side/front extension and porch; ground floor internal alterations; partial raising of roof ridge height and build up of walls at front and rear to create attic conversion, with dormer roof windows on both side roofs, and window at attic level in front elevation.