To make the following additions by way of modifications to recently permitted development to renovate & extend existing dwelling house (Planning Reg. No. 2460036). The development will consist of. (1) To demolish & reconstruct existing dwelling house building. External finishes to match existing
To carry out the following alterations & works to an existing dwelling house (1) renovate existing dwelling house comprising of alterations to elevations, internal fit-out works, (2) demolish front porch and construct new two storey extensions to side and rear of dwelling. (3) upgrade existing septic tank to new mechanical wastewater treatment unit & percolation area, and (4) demolish derelict outbuilding and rebuild as detached domestic garage together with all associated site development works
For the erection of a dormer style extension to front of existing dwelling, alterations to plans and elevations of existing dwelling, alterations to site boundaries, sewerage treatment facilities and all associated and ancillary works
Construct two storey detached dwelling, semi-detached domestic garage, new vehicular entrance onto existing public roadway, driveway, wastewater treatment system and percolation area, landscaping and associated site works
For the construction of a detached domestic garage to rear of existing site and completion of all ancillary site works
To construct a four bay shed which will consist of cubicles, slatted area with slurry holding tank underneath and also construct a silage pit with retaining walls and all associated site works
For (1) the erection of a detached steel-framed gym building, and (2) the erection of a detached steel-framed storage shed
To construct a five bay extension to the existing slatted shed which will consist of a slatted area with slurry holding tank underneath, cubicles, office, dairy and all associated site works
For retention of modular prefabricated single storey building. The building incorporates 12 classrooms, Radio/ Postproduction room, Recording Studio, Art Room, Science Room, Canteen, Sports Theory Room, Staff Room / Offices, Performance Room, Gym and ancillary accommodation / works
To erect fully serviced single storey dwelling with detached domestic garage, entrance, sewerage treatment facilities and all ancillary works
To construct agricultural slatted house building with underground effluent holding tank and carry out associated site works
For amendments to the previously approved planning application (Reference 21/405) to include the following: 1) Increase in floor area of the proposed development, which includes minor alterations to the footprint of the extension. 2) Associated elevational changes to the extension. 3) Adjustment to the site layout plan to include a new vehicular entrance for the proposed extension from the existing IDA Business and Technology park service road, including street lighting, boundary treatments, and footpath connectivity, along with alterations to carparking layout. 4) Construction of a new standalone bin-store and bicycle storage building. 5) PV panels to be constructed on the roof of the extension. 6) All associated ancillary site development works
To erect fully serviced two storey extension to incorporate Educational Training, Innovation and a Business Incubation Centre to the existing Cavan Innovation and Technology centre, associated carparking, connection to existing services and all ancillary works
To erect fully serviced dormer type dwelling with detached domestic garage, entrance, well, sewerage treatment facilities and all ancillary works
To change house type of previously approved dwelling under planning reference 20207 with associated changes to site layout and all ancillary works
For development consisting of - to demolish 3 no. existing mushroom houses and associated concrete pods and permission is sought to construct (1) agricultural slatted shed/agricultural storage shed to incorporate slatted area, underground slurry storage tank, bedded area and hay and machinery storage area, (2) and complete all ancillary and associated site works
For change of use from 'office ancillary to motor sales facilities' to 'office use', and all associated works
To erect fully serviced single storey extension to foyer at front of existing hotel and relocation of existing smoking area and all associated ancillary works
To construct fully serviced dwelling, incorporate wastewater treatment system and percolation area, new entrance arrangement and carry out associated site works
For the infilling of lands, using imported inert material consisting of natural materials of clay, sub soil & stone in order to raise the levels and improve the land for agricultural purposes together with all ancillary site works. The total quantity of material will not exceed 37,000 tonne (class 5 material as per third schedule part 2). the lands will be covered with topsoil and reseeded with grass when complete and will include all ancillary and associated site works. Significant further information, revised plans and a Natura Impact Statement have been submitted.
For the provision of 2no new single storey extensions to the side and rear of existing single storey dwelling, decommission existing septic tank and connect to existing public storm / foul sewer together with all ancillary site development works
To retain existing dormer type window to front of existing dwelling and all associated works
For the change of use of the unit from light industrial to warehouse with trade counters for the sale of building related products principally to trade. Proposed external works on the south east elevation include a new access door and side glazing panels and operator sign with external downlighting. North east elevation: new double exit doors and a vinyl seasonal sign. North West elevation: mechanical plant and air handling units. Internally: the erection of trade counters and staff facilities. All other ancillary works associated with the proposed development
For development consisting of a two storey industrial unit with office accommodation, dedicated car parking (105 no.), bicycle parking (20 no.), minor alterations to existing site entrance and the provision of marshalling yard, ESB sub station and screened plant area to the rear of the building and all associated site works. The development is located within the specific objective zone no. 12 of the Cavan town and environs development plan
Of first floor level floor space and associated alterations created by the addition of a mezzanine within previously approved 2 storey warehouse
1) Retention of additional 1st Floor Office Space. 2) Retention of change of use from existing production area to office area. 3) Retention of workshop extension to rear of building. 4) retention of 5 no. storage containers and 2 no. associated covered areas. 5) Retention of existing workshop shed to rear, of factory. 6) Alterations to existing rear site layout to include for additional parking and all ancillary works. 7) PERMISSION to alter front elevation.
To RETAIN as constructed detached domestic Storage Building to dwelling house
For erection of granny flat extension to side of existing two storey dwelling and all ancillary works
For the alteration of previously granted planning permission reference no. 16/593. The alterations include: 1) revised house and domestic garage location within the site, 2) relocation of site entrance, 3) retain additional floor area and elevational changes to the domestic garage, and 4) all ancillary site development works
To (1) construct agricultural slatted shed to incorporate milking parlour area, dairy, ancillary storage, bedded area, slatted areas, cubicle accommodation, feed and link passages and underground slurry storage tanks, (2) complete all ancillary site works and associated site structures, significant further information has been received
For the removal of existing car wash sump and jet wash unit and the construction of an electric vehicle charging hub and associated infrastructure consisting of the following: (i) installation of 4no. electric vehicle charging bays and 2no. charging units, (ii) new modular sub-unit and CT metering cabinet with mini pillar, (iii) EV banner signage. The proposed development also comprises of new services area along southern boundary and the installation of above ground 4,750 litre Adblue tank along eastern boundary and all other associated site development and surface water drainage works
To consist of an extension of existing service road in order to provide new entrance to existing commercial unit site, lighting, footpaths, connection to all existing services, removal of existing entrance, alterations to site boundaries and all ancillary works
For (i) A 13sqm extension to the front (new entrance lobby) and a 40sqm extension (dry store) to the rear of the existing service station amenity building, with an ancillary outdoor storage compound of 25sqm in southeast corner enclosed by a 2500mm high security fence; (ii) Modifications to the existing internal floor layout of the service station, incorporating revised and relocated seating, storage and till areas, resulting in an increase in the net retail floor area of 24.8sqm; (iii) Elevational changes including new glazing and access doors and removal of existing signage; (iv) Revisions to existing site layout to include for 10no. car parking spaces, incorporating 2no. EV charging spaces and 2no. disabled spaces, and a pedestrian walkway, and (v) All other associated road tie, boundary treatment and site development works. RETENTION is sought for the existing 50.9sqm extension to the rear and 1 no. food offer (‘Chopped’ 19.5sqm in area) within the permitted retail unit
For RETENTION of ‘as-built’ two-storey extension to side of existing dwelling house. Planning PERMISSION is also sought to renovate & carry out further extensions & alterations to the existing dwelling, comprising of the following, (1) Demolition and reconstruction of the front porch, (2) Construct new two-storey extensions to the front & rear of the dwelling, (3) To re-form the first floor level windows and other minor alterations to elevations, and (4) to upgrade existing septic tank to new mechanical wastewater treatment unit & percolation area. Together with all associated site development works
To construct a six bay shed which will consist of slatted area with slurry holding tank underneath, cubicles and all associated site works
For development consisting of Construction of a fully serviced industrial unit, works include construction of a new site entrance from service road, connection to existing public services and associated site development works. Significant further information and revised plans have been submitted.
For (1) construction of a fully serviced industrial unit to incorporate a single storey production and manufacturing area together with a two storey ancillary administration and staff facilities area, (2) provision of car parking, bicycle parking, external yard area, landscaping, boundary treatments and access via existing site entrance, (3) erection of signage to proposed building façade, (4) connection to public foul water, surface water and water main, (5) completion of all ancillary site works and associated structures
To erect fully serviced factory unit, incorporating 2 storey administration & staff facility areas, single storey manufacturing/assembly/storage areas, access via existing entrances, parking, signage, landscaping, boundary treatments, bicycle shelter, connection to public sewer, surface water, watermain and utility services and all ancillary works
For variations to a previously approved Advanced Building Solution consisting of office and light industrial/production space. Permission is sought for revisions to the previously approved main building including a minor increase in permitted floor area, the vehicular/pedestrian entrance, timber post-and-rail boundaries, car parking, landscaping, and access road and all associated site works. This includes new permission for signage, cycle shelters, underground fire-fighting water storage tank, and an independent ESB substation & switch room building, and all associated site works. This application is a variation to previously approved site and building granted under application ref. no. 21117
To construct a detached manufacturing / office facility incorporating first floor offices and training area, ancillary storage building, footpaths, carparking, storage bays, signage, public lighting, connection to existing public services, landscaping, boundary treatments, new entrance onto new access road and all associated site works
To (1) Construct extension to rear of existing CVRT Testing Building to incorporate enlarged CVRT test area and ancillary storage area, (2) Complete all ancillary site works and associated site structures
To construct single storey flat roof side extension to the existing single storey with attic conversion dwelling
To construct a circa. 140m access road, footpaths, public lighting, public services, landscaping, new entrance onto existing public roadway and all associated site works
For alterations to an existing cottage to include a single storey extension to the rear and side, elevational changes, raising the roof height to provide first floor accommodation, new access lane to replace an existing lane which will be closed up, entrance gates and piers, waste-water treatment plant with percolation area and all associated site works
For the demolition of an existing dwelling and the construction of a part single storey, part two storey detached replacement dwelling. The application also includes a new access lane to replace an existing lane which will be closed up, entrance gates and piers, waste-water treatment plant with percolation area and all associated site works
For retention of alterations to site levels to form existing ground levels and permission is also sought for: • The erection of a fully serviced single storey factory unit to be used as a manufacturing facility incorporating 2 storey administration & staff facility areas to include meeting rooms, office space and a canteen. • New vehicular entrances off the existing service roads. • Site works to consist of car parking, landscaping, lighting, the provision of a bicycle shelter and boundary treatments to the site. • Connection to the public sewer, surface water network, watermain and utility services • Detached ESB substation building. • Alterations to existing service road. • All ancillary and associated site works.
To erect fully serviced Food Enterprise Centre which incorporates administration areas and warehouse storage, access via newly proposed service road, newly proposed parking, signage, landscaping, boundary treatments, bicycle shelter, connection to public sewer, surface water, watermain and utility services and all ancillary works
For change of use of existing industrial unit to 'Supply chain, Logistics & Procurement' training centre, signage, parking & all ancillary works
To retain alterations to previously approved unit under Planning Ref. No. 18/477. Alterations include 1) Revised Site 6 site plan incorporating revised site boundaries, site entrance, location of Unit 1 and parking layout, 2) Additional single-storey extension to Unit 1, 3) Alterations to plans and elevations.,4) Additional detached storage unit, 5) 2 no. signage added to Unit 1 elevations, 6) All associated ancillary works
For RETENTION of a) alterations to site layout, entrance and site boundaries, b) external plant and gas tanks, c) 2 no. temporary storage vessels and d) all associated and ancillary works at site 7, IDA Cavan Business Park, Killygarry, Cavan. PERMISSION is also sought to erect 1 no. permanent storage vessels to replace existing temporary storage vessels and for the relocation of the previously approved bicycle shelter within the site