2 two storey extensions to side of existing building (similar to lapsed planning SD17A/0067) and a canopy to front of existing building.

Installation of 410 Solar PV Panels mounted on the roof of 1 existing industrial building and associated site works and services.

Retention of change of use from use as a warehouse/light industrial unit to use for the sale and storage of vehicles and service workshop (170.5 sqm)

Hay shed building (2,100sq.m, 9.85m high); ancillary yard (approx. 1,584sq.m) for equestrian/agricultural related vehicle parking and marshalling with access and egress formed from within the existing equestrian farmyard; landscaping, fencing, associated earthworks and surface water disposal to an on-site soakaway.

Construction of a single storey, three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance, hard & soft landscaping; boundary treatments; all associated site development works above and below ground.

Construction of a single storey three bedroom dwelling house (279.8sq.m); repositioned entrance and upgraded access road from Tay Lane which includes the partial demolition (109sq.m) of the existing stables and closing up of the existing entrance; hard and soft landscaping; boundary treatments and all associated site development works above and below ground.

Amendment to SDCC Reg. Ref. SD20A/0279 to amend the floor area of the permitted single storey dwelling house and associated site development works above and below ground. The amended scheme will result in: the reduction of floorspace from 279.8 sq.m to 208 sq.m; internal reconfiguration; associated elevational amendments; and hard and soft landscaping amendments.

Retention of the ancillary, two storey, office space (123.92sq.m) to the western elevation of the warehouse building and continuation of use of this space as a training facility. This space was built smaller than the ancillary office space (289.9sq.m) granted planning under S01A/0301; retention of a three storey extension built within the existing warehouse area (178.79sq.m) and continuation of use of this space as a training facility.

Erection of 228 photovoltaic solar panels with an area of 398sq.m (with average size of 1.3sq.m per panel) on the existing roof slope and all associated alterations to existing elevations, site, drainage and ancillary works.

Single storey extension to the left hand side; extension to the front at ground and first floor level in order to straighten the front building line; addition of a two storey extension to the front which will act as a porch at ground floor level and a bathroom at first floor level; to face the central portion of the front elevation in natural stone over its full height; extend the existing garage on the right hand side to the front and rear; remove the existing garage roof and build a first floor extension over the entire extended garage area; existing ground floor area including the garage is 152.38 sq.m & the proposed ground floor extensions will add 101.05 sq.m.; the existing first floor are is 68.95sq.m. & the proposed first floor extension will add 115.59sq.m.; all ancillary site works required to complete the project.

Provision of additional facilities at the existing Greenogue Equestrian Centre (permitted under SDCC Reg. Ref. SD16A/0417 and as amended under Reg. Ref. SD18A/0035) to create a sport horse Centre of Excellence comprising a new indoor sand arena (3,759sq.m); the extension of the existing main outdoor jumping sand arena 800sq.m (resulting in a total of 4,000sq.m); the extension of the existing indoor sand arena by 250sq.m (resulting in a total of 1,625sq.m); a 2 storey training and administration facility (1,300sq.m); a veterinary shed (572sq.m); a hay shed (1,209sq.m); a 2 storey visitor toilets, lockers and storage facility (200sq.m) and a single storey building (673sq.m) to accommodate a laboratory for an Assisted Reproduction Programme. The proposed development also includes the provision of 50 car parking spaces within the existing yard; 20 bicycle parking spaces; plant; hard and soft landscaping; boundary treatments; increased hard standing areas for parking and turning of horse boxes and lorries; and all associated site development works above and below ground at this 7.88 Ha (c.78,800sqm) site.

Retention permission at site 514, Greenogue Industrial Park Rathcoole, Co Dublin for the First Floor Ancillary Offices measuring 216m2. All other development details remain as per granted planning permission Reg. Ref SD05A/0281

A new hazardous medical waste processing facility, including a change of use of the existing building (Building B) on site from general waste disposal to hazardous medical waste processing, and the extension of the current operating hours to 24/7 The demolition/removal of the existing outbuildings/structures including 2 no. storage units, an office and staff room canteen; The construction of an extension (c. 966 sqm) to the existing building c.1,577 sqm on site (Building B) and associated outbuildings including a new boiler house and storage areas; The construction of a new building (c. 984 sqm) to the northwest of the site (Building A); The construction of a new 2 storey office building (c. 287 sqm) to the southeast of the site; Provision of 26 no. car parking spaces, 5 no. truck parking spaces and 18 no. bicycle stands (30 no. spaces) to serve the proposed development; All ancillary landscaping, boundary treatments, associated infrastructure, internal roads, associated processing and treatment plant, weighbridges, pv panels, and site development works to support the development. The operation of the proposed development will require an Industrial Emissions Licence (IEL) from the Environmental Protection Agency. A Review of the existing IEL relating to the site will be sought from the Environmental Protection Agency in relation to the proposed development. An Environmental Impact Assessment Report (EIAR) and Natura Impact Statement (NIS) will be submitted to the Planning Authority with the planning application and the EIAR and NIS will be available for inspection or purchase at a fee not exceeding the reasonable cost of making a copy at the offices of the Planning Authority.

The amalgamation of two existing industrial buildings (Unit 502B and Unit 502C), including ancillary offices, comprising 1,860 sq.m and 1,929 sq.m respectively, to form a single industrial building comprising 3,789. sq.m, including ancillary offices and b) all associated site works.

A) the Sub-division of the existing single industrial building, including ancillary offices, comprising 3,789 sq.m to form two separate self-contained industrial buildings, including ancillary offices, comprising 1,860 sq.m and 1,929 sq.m and b) all associated site works.

Planning Permission for Alterations to amend the previous granted permission (Reg Ref SD23A/0178) for a Self-Storage Facility revised to provide an open hard surfaced yard to be used for the parking of vehicles and trailers and external storage of non-hazardous goods with all associated works and Ancillary WC Facility at Tay Lane, Greenogue, Rathcoole, Co. Dublin. The subject alterations for which Planning Permission is sought are as follows: 1. Permitted Self-Storage Facility omitted to provide an open hard surfaced yard 2,468m2 to be used for the parking of vehicles and trailers and external storage of non-hazardous goods; 2. Provide a single storey Ancillary WC Facility, 27m2, 4.2m high, to the North-East boundary of the site. 3. Omission of 6 no. car parking spaces to the side (north-western) elevation; 4. Adjusted HGV site entrance set back to accommodate a recessed HGV Access/egress; 5. Provision of 9m wide HGV sliding gate; 6. Associated landscape adjustment due to the inclusion of the alterations above; 7. Associated drainage adjustments due to the inclusion of the alterations above.

Construction of a Self-Storage building with ancillary facilities and associated development. The Self-Storage building will have a maximum height of 9.745 metres with a Gross Floor Area of 1,796 sq m including storage area (1,698 sq m) and ancillary facilities (98 sq m). The development will also include: a vehicular entrance/exit to the site via Tay Lane; 6 No. ancillary car parking spaces (including 1 No. accessible parking space); loading bays; external fire escape stairs; an external canopy; boundary treatments; hard and soft landscaping; lighting; and all associated site and development works above and below ground.

The installation of Solar PV Panels to be mounted on the rooftop of an existing warehouse building and all associated ancillary infrastructure. PV Panels will not extend above parapet line.

Alterations to existing granted Planning Permission for works at the existing GAA pitch facility (granted Planning Application Reg. Ref. SD22A/0298) at Rathcreedan, Newcastle, Co. Dublin. The subject alterations for which planning permission is sought for are as follows: 1. Addition of 6No. lighting columns, 15m tall pitch lights. 2. Addition of non-illuminated flat board sponsor signage at the north boundary of the pitch area. The extent and location of the signage is defined on the accompanying drawings. All other details remain as per the granted applications Reg. Ref. SD22A/0298.

St. Finians GAA Club, intend to apply for the following retention permission and planning permission at an existing GAA pitch facility at Rathcreedan, Newcastle, Co Dublin. Retention permission is sought for 1,550m2 unmetalled drop-off area/carpark ancillary to the GAA pitch use and planning permission is sought for: GAA pitch goal posts (2No. standard 8m high) coupled with 8m high ballstop nets to the rear of each goal post. Entrance improvements from the existing Newcastle Road (R120) to the site including widening existing gate from 4.2m to 6m with setback gate arrangement to improve sightlines.

1 ESB Substation and MV Switch room to serve warehouse development Block A; ESB substation and MV Switch room have a total internal floor area of 28sq.m and are 3.6m high; Block A development, currently under construction, was originally granted under South Dublin County Council planning permission Reg. Ref SD18A/0265 and SD21A/0082.

Alterations to existing granted planning, Ref. SD19A/0065, for a proposed Waste Metal Transfer Facility including Waste Electric & Electronic Equipment (WEEE). The subject alterations for which planning permission is sought for are as follows: (1) Reconfiguration of the floor plan areas as follows: (A) Provision of 535sq.m additional floor area due to introduction of areas as follows - (A.1) Extended display area at ground floor of ancillary office, addition of 46sq.m floor area, (A.2) Extended open plan office at first floor of ancillary office, addition of 20sq.m floor area, (A.3) Single storey ancillary storage facility to the front north-east elevation totalling 166sq.m with overall height 7m, (A.4) Mezzanine area to the south eastern side of Light Industrial Unit, totalling 303sq.m. Alterations listed above result in total building area Increase from 4391sq.m to 4926sq.m as shown at the revised table of gross Internal floor areas & uses. (B) Change of use of 64sq.m of light industrial unit floor area to staff facilities due to the introduction of: (B.1) Enclosed stairs from Light Industrial Unit to ancillary office/staff facilities (overall 31sq.m), (B.2) single storey cleaners store and storage at ground floor to the north-eastern comer of light industrial unit (overall 33sq.m). (C) Change of use of 100sq.m of workshop charging area & staff facilities to workshop area & single storey office/staff facilities. (D) Introduction of full height dividing wall at light industrial unit. 2. Elevations alterations as per list above plus additional alterations as follows: (a) Provision of full height cladding (ground floor to roof) to light industrial unit and ancillary Workshop. (b) Introduction of 11m wide x 6m high open to light industrial unit side (north-western) elevation, (c) Rearrangement of all fire exit & level access doors to light industrial unit & ancillary workshop including omission and addition of the same, (d) Introduction of integrated modular louvre system to light industrial unit rear (south­western) & side (north-western) elevation, (e) Introduction of canopies to the ancillary office main entrance and above 11m wide open & dock levellers to light industrial unit side (north-western) elevation. (3) Site plan alterations as follows: (a) Rearrangement of car parking spaces due to provision of office extended display area to the front (north-eastern) elevation, (b) Provision of new finish floor level to office/staff facilities and Workshop and associated site levels adjustments, (c) Provision of a new boundary fence type (paladin fence) throughout the development, (d) Provision of additional weighbridge - overall 2 proposed and rearrangement of brush wash and steam wash between workshop and site's north-western boundary, (e) Provision of building protection bollards to workshop side elevations (south-east and north­west), (f) Associated drainage adjustments due to the inclusion of the alterations above plus reduction of surface water and foul sewer outfall route as per as built access road and services which serve built developments to the east of the site. All other details such as landscaping, lighting, external surface finishes, Environmental Impact Assessment Report (EIAR), Flood Risk Assessment etc. will remain as per the granted application ref. SD19A/0065.

The installation of Solar PV Panels to be mounted on the rooftop of an existing warehouse building and all associated ancillary infrastructure. PV Panels will not extend above parapet line.

Construction of a double height (8.5m high) industrial warehouse building for plant machinery maintenance and storage purposes; associated ancillary two storey office and staff welfare accommodation (c.501sqm Total GFA); 9 car parking spaces, 3 bicycle parking spaces and all associated site ancillary development works and drainage connections.

Alterations/extension of the existing single-storey detached house at Aylmer Lodge comprising of partial demolition of single storey rear extension and shed, and construction of a new single storey extension Modification's to existing fenestration plus all associated internal alterations and site development

A new waste handling building (561sqm and 12m high); Use of an existing building (159 sqm and 7.5m high) granted retention under SD22A/0100 for waste handling; elevational treatment including signage to the northern facade of the existing building granted retention under SD22A/0100; continued use of the existing building (427 sqm and 8.2m high) granted permission under SD06A/1097 and all ancillary site works. The development will comprise an activity requiring a review of the existing waste facility permit (WFP-DS-11-0002-06). The proposed development includes an increase in the total maximum annual waste intake to 20,000 tonnes. An Environmental Impact Assessment Report has been submitted with this application.

Amendments to an existing warehouse building comprising the introduction of a mezzanine floor (c.883.24sq.m) to provide additional office and welfare facilities and a plant area for one air handling unit above (c.181.76sq.m); internal amendments are proposed to provide a new layout to office and welfare facilities; single storey lobby (c.18sq.m) is proposed to the west of the building which will result in the loss of two car parking spaces; minor alterations to the elevations comprising the introduction of three louvres, one to the west and two to the north elevation and a emergency access door to the west elevation; two new condensing units are proposed to the north elevation; one AHU condensing unit and five condensing units are proposed to the west elevation and all other associated works.

Retention of an existing ESB substation (c. 17.5sq.m) to the east of the site; Permission for new welfare cabin (c. 17.1sq.m) and a new guard cabin (c. 2sq.m) to the east of the site; Permission for one high level sign on the south elevation (9.5m above ground level) and one high level sign on the east elevation (8.5m above ground level) of the existing building; Both signs are 6m x 1.8m and non illuminated; Wayfinding signs are proposed across the site and all other associated works.

Minor alterations to the existing warehouse building including a new canopy to the south; three new level access doors on the south elevation and external waste platform; provision of hardstanding and use of the south of the site for operational parking; removal of the existing fencing dissecting the site; introduction of new fencing, security hut, gate, smoking shelter, cycle shelter, lighting, substation and transformer, acoustic screening to the north west and all other associated works.

A\(I) the provision of a waste transfer station facility for the storage and transfer of non-hazardous waste. The proposed facility includes: (a) construction of a two-storey office building with staff facilities, served by 55 no. car parking spaces (inclusive of 2 no. accessible parking spaces), and accessed via the existing entrance in the southern portion of the site, along the western site boundary. (b) provision of an internal one-way road in the central portion of the site, accessible from the existing entrance, located centrally along the western site boundary; (c) provision of waste storage areas in the central portion of the site, together with van/trailer parking spaces, 2 no. storage containers and 2 no. HVO tanks; (d) provision of waste storage area in northern portion of the site; (e) provision of an internal one-way road in the northern portion of the site comprising a compacted permeable hardcore surface, accessed via the existing entrance at the northern end of the site, along the western site boundary. The northern internal road will also include a weighbridge and adjacent waste storage bays. The proposal is also inclusive of (ii) landscaping, boundary treatments pedestrian paths, drainage, and all associated site development and ancillary works necessary to facilitate the development at lands on Jordanstown View (to the south of the Unipharm Group Premises), Greenough Business Park, Rathcoole, Co. Dublin. This activity will be applied for with a New Waste Facility Permit Application, under the Waste Management (Facility Permit and Registration) Regulations 2007 as amended.

Retention of existing building (159.25) currently not in use. Proposed use is intended as a recycling facility and this will be subject to a separate application.

Subdivision of existing Block A (existing areas; 14,267sq.m warehouse and 1019sq.m ancillary office/staff facilities as granted permission under Reg. SD19A/0265 into 2 warehouse units. Unit A1: 9169sq.m existing warehouse, 684sq.m existing ancillary office/staff facilities block A1 & 286sq.m existing ancillary office/staff facilities block A2; Unit A2: 4965sq.m existing warehouse & 356sq.m proposed ancillary office/staff facilities block A3 (consisting of 49sq.m existing toilet block, 133sq.m, change of use of existing warehouse to ancillary office/staff facilities on ground floor & 174sq.m additional first floor ancillary office/staff facilities; minor elevation adjustments to north & west elevation of Unit A2 to facilitate the additional ancillary office/staff facilities; subdivision of the rear HGV yard by internal fencing; provision of new HGV access gate to Unit A1 from the existing estate access road.

4 No. building mounted company logo advertising signs or existing warehouse office unit comprised of: Sign No 1: 6.84m2 at 12.87m above ground to the side (South east) elevation; Sign No 2: 6.84m2 at 12.50m above ground to the front (North east) elevation; Sign No 3: 1.99m2 at 11.03m above ground to the side(South east) elevation: Sign No 4: 1.99m2 at 10.70m above ground to the front(North east) elevation and all ancillary site works.

Alterations to previously granted planning alterations application, Reg. Ref. SD21A/0083, at Block A, College Lane, Greenogue, Rathcoole, Co. Dublin. The subject alterations refer to subdivided Unit A2 only consists of omission of a previously proposed addition to existing staff facilities block A3, which is no longer required as part of the development. The results in change of use 133sq.m ancillary office/staff facilities area on the first floor. All other details remain as per the granted application reg ref SD21A/0083.

Erect 8 No. Company logo advertising signs at the Block A Jordanstown Road, Greenogue Business Park, Greenogue, Rathcoole, Co Dublin. The signage will consist of the following: Sign No 1: Area 5.60m2 at 13.80m above ground level Sign No 2 Area 5.60ms at 13.60m above ground level to the front (north-east) elevation Sign No 3 Area 5.60m2 at 13.52m above ground level to the side (north-west) elevation Sign No 4 Area 5.60m2 at 13.35m above ground level to the rear (south west) elevation Sign No 5 Area 0.175m2 by the entrance door on the front (north-east) elevation Signs No 6 & 7: Area 0.175m2 each) on the main entrance door Sign No 8 Fence sign Area 0.90m2 by the gates at the north-western site boundary

Subdivision of existing Block A (existing areas; 14,267sq.m warehouse and 1019sq.m ancillary office/staff facilities as granted permission under Reg. SD19A/0265 into 2 warehouse units. Unit A1: 6600sq.m existing warehouse, 684sq.m existing ancillary office/staff facilities; Unit A2: 7474sq.m existing warehouse, 335sq.m existing ancillary office/staff facilities; 133sq.m change of use of existing warehouse to ancillary office/staff facilities and 174sq.m additional first floor ancillary office/staff facilities;; minor elevation adjustments to north & west elevation of Unit A2 to facilitate the additional ancillary office/staff facilities; minor alterations to existing ancillary staff facilities to facilitate the subdivision; subdivision of the rear HGV yard by internal fencing; provision of new HGV access gate to Unit A1 from the existing estate access road.

The provision of a new winter module, a replacement waste platform canopy and amendments to van loading bays at an existing distribution facility.

Electric Vehicle Charging Station consisting of 5 EV charging stations, each serving 2 vehicle charging bays, a total of 10 charging points, 2 x 4 bay canopy structures incorporate circa. 84sq.m of roof mounted solar panels; The proposed development also incorporates 1 ESB substation, the use of an existing point of access / egress and all associated above and below ground ancillary works.

Modifications to a permitted warehouse development (as granted under SD19A/0407, as amended by SD21A/0200); The amendments principally comprise an overall increase in the commercial floor area of the warehouse by 2,334sq.m from the permitted 27,683sq.m to 30,017sq.m; The modifications proposed include: an increase in plant/machinery areas from 1,363sq.m to 3,933sq.m (principally through the provision of an additional mezzanine level within the warehouse area to accommodate plant/machinery); a reduction in the permitted mezzanine level 2 from 9,703sq.m to 9,349sq.m (principally through the provision of opes in the mezzanine floor to accommodate machinery associated with an advanced picking system); an increase in warehouse floor area from 14,225sq.m to 14,282 sq.m; an increase in staff facilities from 1,616sq.m to 1,659sq.m; and an increase in ancillary office area from 776sq.m to 794sq.m; The development will also include: the provision of security hut (14.7sq.m) close to the southern site boundary; the relocation of the building's main entrance stair core at the western elevation; elevational changes including the repositioning of 2 level entry doors and 1 dock leveller and the associated canopy, repositioning of fire escape doors, removal of 2 M&E rooms; internal modifications including the insertion of a warehouse toilet block at ground floor level, repositioning of stair cores; the provision of a pedestrian gate adjacent to the bin store; reduction in bin area from previously approved 45sq.m to 38sq.m; provision of compactor in place of 1 van parking space along the south-east boundary resulting in the reduction of van parking spaces from 12 to 11 in a modified arrangement; relocation of van egress gate further south; modifications to the position of the van loading entry doors and associated canopy; modifications to hard and soft landscaping and boundary treatments including the provision of a paladin fence separating the car parking area and the HGV circulation area and removal of 2 green walls; and all associated site works above and below ground.

Provision of a warehouse unit with ancillary three storey office and staff facilities and associated development; the building will have a maximum height of 23.7m with a gross floor area of 13,959sq.m including a warehouse area (12,369sq.m); staff facilities (548sq.m) and ancillary office area (1,042sq.m); provision of one new vehicular access/egress point at the northern corner of the subject site and one HGV access/egress point at the southern corner of the subject site which connects onto the internal access road for two adjacent permitted warehouses (Reg. Ref. SD18A/0265) and permitted waste metal facility (Reg. Ref. SD19A/0065) which links to the Greenogue Roundabout on the R120; 119 ancillary car parking spaces; bicycle parking; HGV yard with 12 loading bays; level access goods doors; dock levellers; hard and soft landscaping; ESB substation (9sq.m); boundary treatments and associated site development works above and below ground.

Amendments principally comprising of an overall increase in the commercial floor area by 15,479sq.m from the permitted 13,959sq.m to 29,438sq.m; the permitted scheme has 3 internal ancillary office floor levels, and the proposed alterations provide 2 mezzanine levels in the warehouse area (i.e a total of 5 internal floor levels); the permitted maximum height of the development at 23.7 metres will remain unchanged; the additional 15,479sq.m development proposed will comprise an increase in the warehouse floor area from 12,369sq.m to 13,353sq.m, staff facilities from 548sq.m to 2,582sq.m and ancillary office area from 1,042sq.m to 2,437sq.m; in addition to the provision of a 2 storey mezzanine warehouse area (9,703sq.m), integrated plant room (434sq.m) and plant area on 2 floors (929sq.m); construction of a 2 storey car-parking area (4,057sq.m and 7.8m height) to accommodate an increase from the previously permitted 119 ancillary car parking spaces to 190 car parking spaces; 13 designated van parking spaces (no dedicated van spaces previously proposed); 72 permitted cycle parking spaces; reconfiguration of the HGV yard and an increase in the number of HGV dock levellers from 12 to 14 and the provision of 16 van loading level entry doors; the provision of an additional egress on the eastern boundary to facilitate vans exiting the site; sprinkler tank and associated underground pumps; repositioned ESB substation (15sq.m and 3m height); bin storage (42sq.m and 2.9m height); amended lighting layout; signage; modifications to hard and soft landscaping and boundary treatments; and associated site development works above and below ground.

Alteration to previously granted planning permission (Reg. SD19A/0407, SD21A/0200 & SD22A/0092) for development at Site C (2.7ha site).

Planning permission Sought for to extend existing concrete ridge tiles and tiled roof to form a new Dutch type Roof Structure extend existing side structure to new soffit level with new obscure glazed window' new dormer roof structure and rooflight to existing rear tiled roof; conversion of existing attic area in to a new non-habitable area and internal alterations

Single storey extension to front, east side and rear comprising a family flat; one and two storey dormer style extension to side and rear, incorporating dormer windows to front and rear; 2 rooflights to existing front roof.

Charles River Microbial Solutions International Limited intend to apply to South Dublin County Council for retention permission at unit no. 648, Jordanstown Drive, Greenogue Business Park, Rathcoole, Co Dublin. The retention permission consists of: Retention of minor alterations to elevations associated with changes to the window on the First Floor Level. Retention of an increase in Floor Area of the External Cold Store/freezer compound with an associated increase of size to the Cold Store and the Freezer Units, and all associated works.

Retention permission consists of 1. Retention of existing mezzanine floor at first floor level within unit 648 totalling 453 sqm. 2. Retention of additional car parking spaces within the site, some of which are utilised to serve the adjacent unit 649. 3. Retention of existing pedestrian access point between units 648 and 649. Permission is sought for 1. Change of use of unit 648 from waste metal transfer facility to provide for use of the building as a pharmaceutical warehousing building with provisions for storage, offices, laboratories and staff facilities. 2. Reconfiguration of existing offices and all associated elevational changes proposed. 3. Provision of a bicycle shelter along with an external freezer building, external cold store building, bin compound building, air handling unit and heat rejection plant. 4. Provision of an additional 18 no. car spaces for unit 648. 5. Provisions of all associated and ancillary site works. 6. Provision of new pedestrian entrance. 7. Connection to existing services. 8. Provision of associated signage.

Changes to previously approved single storey 3 bedroom dwelling house (SDCC Planning Ref SD23A/0287), changes to include revised access & parking configuration to site layout and associated site works, on overall site comprising 0.095 hectares (approx 950 m2)

Planning permission for a new single storey extension, comprising toilet, sitting room, gym and storage, to side and rear of the existing house with all associated ancillary works

Retention planning permission for 2 storey extension to rear of existing house, a single storey garage to side of existing house with associated ancillary works.

The erection of 1 no. single storey 3 bedroom dwelling house circa 122 m2 nett internal area (circa 153 m2 gross external area) to include new vehicle access, car parking, new service & drainage connections & other associated site works including partial removal of existing boundary wall & fence, on overall site comprising 0.0752 hectares (circa 752 m2)