Planning records
Showing 1-50 of 2,304 public recordsTo erect 5,539.00m2 or 1,053.00kWp of photovoltaic panels on the roof of shed 1 building and on the roof of shed 2 building in our factory with all associated site works
For (i) A 13sqm extension to the front (new entrance lobby) and a 40sqm extension (dry store) to the rear of the existing service station amenity building, with an ancillary outdoor storage compound of 25sqm in southeast corner enclosed by a 2500mm high security fence; (ii) Modifications to the existing internal floor layout of the service station, incorporating revised and relocated seating, storage and till areas, resulting in an increase in the net retail floor area of 24.8sqm; (iii) Elevational changes including new glazing and access doors and removal of existing signage; (iv) Revisions to existing site layout to include for 10no. car parking spaces, incorporating 2no. EV charging spaces and 2no. disabled spaces, and a pedestrian walkway, and (v) All other associated road tie, boundary treatment and site development works. RETENTION is sought for the existing 50.9sqm extension to the rear and 1 no. food offer (‘Chopped’ 19.5sqm in area) within the permitted retail unit
To retain (a)existing detached storage shed, (b) existing maintenance store to the north elevation of the existing factory unit, (c)existing effluent plant building to the south elevation of the existing factory unit and all associated works and site works. This development comprises of an Integrated Pollution Prevention & Control Licence
To (1) Construct extension to rear of existing CVRT Testing Building to incorporate enlarged CVRT test area and ancillary storage area, (2) Complete all ancillary site works and associated site structures
For the removal of existing car wash sump and jet wash unit and the construction of an electric vehicle charging hub and associated infrastructure consisting of the following: (i) installation of 4no. electric vehicle charging bays and 2no. charging units, (ii) new modular sub-unit and CT metering cabinet with mini pillar, (iii) EV banner signage. The proposed development also comprises of new services area along southern boundary and the installation of above ground 4,750 litre Adblue tank along eastern boundary and all other associated site development and surface water drainage works
For change of use of existing industrial unit to 'Supply chain, Logistics & Procurement' training centre, signage, parking & all ancillary works
For retention of modular prefabricated single storey building. The building incorporates 12 classrooms, Radio/ Postproduction room, Recording Studio, Art Room, Science Room, Canteen, Sports Theory Room, Staff Room / Offices, Performance Room, Gym and ancillary accommodation / works
Of first floor level floor space and associated alterations created by the addition of a mezzanine within previously approved 2 storey warehouse
For change of use from 'office ancillary to motor sales facilities' to 'office use', and all associated works
To erect fully serviced dwelling, detached domestic garage, install sewerage treatment unit, percolation area, form entrance/access and all associated works. Significant further information and revised plans have been submitted.
For the change of use of the unit from light industrial to warehouse with trade counters for the sale of building related products principally to trade. Proposed external works on the south east elevation include a new access door and side glazing panels and operator sign with external downlighting. North east elevation: new double exit doors and a vinyl seasonal sign. North West elevation: mechanical plant and air handling units. Internally: the erection of trade counters and staff facilities. All other ancillary works associated with the proposed development
Of glass conservatory (12sqm) to side of existing residence
To consist of an extension of existing service road in order to provide new entrance to existing commercial unit site, lighting, footpaths, connection to all existing services, removal of existing entrance, alterations to site boundaries and all ancillary works
For retention of alterations to site levels to form existing ground levels and permission is also sought for: • The erection of a fully serviced single storey factory unit to be used as a manufacturing facility incorporating 2 storey administration & staff facility areas to include meeting rooms, office space and a canteen. • New vehicular entrances off the existing service roads. • Site works to consist of car parking, landscaping, lighting, the provision of a bicycle shelter and boundary treatments to the site. • Connection to the public sewer, surface water network, watermain and utility services • Detached ESB substation building. • Alterations to existing service road. • All ancillary and associated site works.
To erect fully serviced single storey extension to foyer at front of existing hotel and relocation of existing smoking area and all associated ancillary works
To erect a part single storey, part two storey extension to the rear and side of their dwelling, together with all associated site works
For the installation of a modular substation and ancillary site development works; to facilitate 2 no. shared electric vehicle charging units and 4 no. charging bays and ancillary site works within a partially reconfigured parking area
For (1) construction of a fully serviced industrial unit to incorporate a single storey production and manufacturing area together with a two storey ancillary administration and staff facilities area, (2) provision of car parking, bicycle parking, external yard area, landscaping, boundary treatments and access via existing site entrance, (3) erection of signage to proposed building façade, (4) connection to public foul water, surface water and water main, (5) completion of all ancillary site works and associated structures
For Permission for development of a 38kV/MV Gas Insulated Switchgear (GIS) Electrical Substation at this site (c. 1.929 Ha) located at Cavan Business & Technology Park, Dublin Road, Killygarry, Cavan, Co. Cavan. The site is generally bound to the north by a private site access road; to the east by the Cavan Business & Technology Park private access road; to the south by unoccupied greenfield land; and to the west by an existing industrial property. The proposed development will consist of the provision of a new 38 kV / MV Gas Insulated Switchgear (GIS) Electrical Substation and will include the following elements: 1. Removal of existing MV timber poleset and associated overhead line 2. Construction of: i. A new substation compound (c. 1,999 sq.m) with a 2.6 m high palisade fence ii. 1 No. prefabricated 38 kV GIS module and foundation (c.31 m2 and c.5.139 m high); iii. 1 No. prefabricated MV GIS module and foundation (c.34 m2 and c.4.64 m high); iv. 1 No. prefabricated Control Room module and foundation (c.34 m2 and c.4.64 m high); v. 2 No. 38/20 kV 18.75 MVA transformers and associated bunds (c.4.67 m high ea.); vi. Telecommunication SCADA pole of c. 12 m in height; vii. Associated and ancillary outdoor electrical equipment and other apparatus, including installation of underground cables; viii. All associated site development works including provision of access roads, lighting, boundary fences, landscaping, site services including drainage and all ancillary site development works
The development consists of 1. To construct of a 3-bedroom log cabin/modular home type dwelling at the rear of the existing dwelling 2. To connect to existing public sewage service 3. To maintain the existing hedgerow and all ancillary site development works
For development consisting of Construction of a fully serviced industrial unit, works include construction of a new site entrance from service road, connection to existing public services and associated site development works. Significant further information and revised plans have been submitted.
For amendments to the previously approved planning application (Reference 21/405) to include the following: 1) Increase in floor area of the proposed development, which includes minor alterations to the footprint of the extension. 2) Associated elevational changes to the extension. 3) Adjustment to the site layout plan to include a new vehicular entrance for the proposed extension from the existing IDA Business and Technology park service road, including street lighting, boundary treatments, and footpath connectivity, along with alterations to carparking layout. 4) Construction of a new standalone bin-store and bicycle storage building. 5) PV panels to be constructed on the roof of the extension. 6) All associated ancillary site development works
To erect fully serviced two storey extension to incorporate Educational Training, Innovation and a Business Incubation Centre to the existing Cavan Innovation and Technology centre, associated carparking, connection to existing services and all ancillary works
For RETENTION of a) alterations to site layout, entrance and site boundaries, b) external plant and gas tanks, c) 2 no. temporary storage vessels and d) all associated and ancillary works at site 7, IDA Cavan Business Park, Killygarry, Cavan. PERMISSION is also sought to erect 1 no. permanent storage vessels to replace existing temporary storage vessels and for the relocation of the previously approved bicycle shelter within the site
For the construction of an ESB substation building and all ancillary site development works
For alterations to previously approved unit under planning reference 18/477 to include - a) reduction in building height, b) additional floor area, c) associated alterations to floor plans and elevations, d) alterations to site layout & boundaries, e) alteration to site entrance and f) all associated and ancillary works
To retain existing first floor mezzanine, entrance porch and all associated alterations to existing Cavan Hire Unit
For change of use for part of retail unit from retail to retail and ancillary Off-licence area
For development consisting of a two storey industrial unit with office accommodation, dedicated car parking (105 no.), bicycle parking (20 no.), minor alterations to existing site entrance and the provision of marshalling yard, ESB sub station and screened plant area to the rear of the building and all associated site works. The development is located within the specific objective zone no. 12 of the Cavan town and environs development plan
To retain alterations to previously approved unit under Planning Ref. No. 18/477. Alterations include 1) Revised Site 6 site plan incorporating revised site boundaries, site entrance, location of Unit 1 and parking layout, 2) Additional single-storey extension to Unit 1, 3) Alterations to plans and elevations.,4) Additional detached storage unit, 5) 2 no. signage added to Unit 1 elevations, 6) All associated ancillary works
For variations to a previously approved Advanced Building Solution consisting of office and light industrial/production space. Permission is sought for revisions to the previously approved main building including a minor increase in permitted floor area, the vehicular/pedestrian entrance, timber post-and-rail boundaries, car parking, landscaping, and access road and all associated site works. This includes new permission for signage, cycle shelters, underground fire-fighting water storage tank, and an independent ESB substation & switch room building, and all associated site works. This application is a variation to previously approved site and building granted under application ref. no. 21117
(1) to retain perimeter boundary fence/ gate & all ancillary works carried out and (2) permission for modifications to existing fence & all ancillary works at Tirquin, Cavan, Co. Cavan
Is sought to retain perimeter boundary fence/gate and all ancillary works
To erect fully serviced factory unit, incorporating 2 storey administration & staff facility areas, single storey manufacturing/assembly/storage areas, access via existing entrances, parking, signage, landscaping, boundary treatments, bicycle shelter, connection to public sewer, surface water, watermain and utility services and all ancillary works
1) Retention of additional 1st Floor Office Space. 2) Retention of change of use from existing production area to office area. 3) Retention of workshop extension to rear of building. 4) retention of 5 no. storage containers and 2 no. associated covered areas. 5) Retention of existing workshop shed to rear, of factory. 6) Alterations to existing rear site layout to include for additional parking and all ancillary works. 7) PERMISSION to alter front elevation.
Erect replacement dormer type dwelling house, detached domestic garage, entrance gates and piers, waste water treatment system with percolation area and all associated site works
For development consisting of erection of a dormer type dwelling houses, detached domestic garage, entrance gates and piers, waste water treatment system with percolation area and all associated site works
To extend the residential development known as Bramble Lane as follows: (1) demolish all existing partially built dwellings, (2) erect 45 no. fully serviced dwellings as follows: (a) 13 no. 2 storey 3 bed semi detached and terraced dwellings, (b) 28 no. 2 storey 2bed semi detached and terraced dwellings, (c) 4 no. 2 storey 1 bed terraced dwellings, and (3) associated service road, site boundaries, open space and all associated site works. Previously granted under approved permission 06/1032
To carry out alterations to previously approved PL. Ref. No. 22/440 as follows: 1) alterations to previously approved house numbers 1, 19, 23, 31, 32, comprising of minor alterations to plans & elevations. 2) change block comprising of units 9, 10, 11, 12, 13 (previously 2no. 1 bed duplex units and 1no. 2 bed, two storey unit) to 3no. 2 bed, two storey townhouse block. 3) associated alterations to site layout and all ancillary and associated works
For erection of new storage shed to rear of site, remove existing totem sign and install new 5.5m totem sign, installation of new 4.3m high archway sign, alterations to existing signage to building façade with associated alterations to elevations and all ancillary works
To erect fully serviced Food Enterprise Centre which incorporates administration areas and warehouse storage, access via newly proposed service road, newly proposed parking, signage, landscaping, boundary treatments, bicycle shelter, connection to public sewer, surface water, watermain and utility services and all ancillary works
For a single storey detached multipurpose building associated with existing car sales and servicing premises and all associated site works
To (1) retain porch canopies to front elevation of house types D,G & I. (2) Retain replacement of lounge bay window with standard window to side of house type H. (3) retain landing window to front elevation of house types G & I. (4) Retain landing window to side elevation of house type F. (5) Retain en-suite window to side elevation of house type D. (6) Retain mirrored floor plans & elevations to house type D on site no's 28, 43, 44, & 51 Bramble Rise. (7) Retain Replacement of house type E with house type L as constructed with alterations to site boundaries. (8) Retain mirrored floor plans & elevations to house type L as constructed on site no's 57,58,59 & 60 Bramble Avenue. (9) Retain amended floor plans and elevations to house type J & K as constructed on site no's 13,14,15, 61, 62 & 63 Bramble Avenue. (10) Retain replacement of house type F & G (Town Houses) with N & P (Semi Detached) as constructed on sites no's 5,6,7,8,9,10,11 & 12 Bramble Avenue. And all ancillary site works (previously granted under approved permissions 04/898 & 06/942). This application relates to 55 no. houses in total
Of alterations to existing petrol station. The alterations to be retained are as follows; (i) provision of bollards separating fuel pumps from public footpath along Dublin Road; (ii) alterations to the forecourt canopy including revised design and illuminated signage; (iii) directional signage at entrance and exit of the site; (iv) replacement of a totem sign; (v) brick paving along eastern boundary wall, around bollards and totem sign, and around new offset fill to meet current regulations; (vi) HGV pumps and associated signage to replace 3 no. pre-existing pumps at eastern site boundary; (vii) Air and Water unit relocated to replace existing with associated signage; (viii) ACO drainage channels around forecourt, along tanker stand and at the entrance and exit to the site; (ix) decommissioning of 3 no. existing underground fuel tanks and provision of 1 no. 60,000L underground fuel tank; (x) relocation of electrical kiosk; and (xi) the development will also include all associated site works including, landscaping, infrastructure, lighting, surface, drainage, boundary treatments, and site works, necessary to facilitate the development
To construct a circa. 140m access road, footpaths, public lighting, public services, landscaping, new entrance onto existing public roadway and all associated site works
EXTENSION OF DURATION OF Planning Reg. No. 16/379; to erect fully serviced two storey building incorporating ground floor shop, deli area, storage & w.c. facilities & first floor office area. Development also consists of relocation and alteration of existing forecourt, fuel pumps & canopy, associated carparking & signage with connection to water mains, foul sewer and all associated ancillary site works. Significant further information and revised plans have been submitted
For the erection of attached single storey extension comprising chiller & freezer room to side of existing building, alterations to existing ground floor plans and elevations & all ancillary works. Significant Further Information has been received
Sought for change of use of first floor of Unit No. 6 to form additional retail area, customer toilets, storage, staff facilities and RETENTION of auxiliary kitchen and all ancillary works
To construct a detached manufacturing / office facility incorporating first floor offices and training area, ancillary storage building, footpaths, carparking, storage bays, signage, public lighting, connection to existing public services, landscaping, boundary treatments, new entrance onto new access road and all associated site works
For the following: 1. Brush-wash bay for assisted car washing including a 3m high glazed screen to the North and West sides of the washbay; 2. A 3m high enclosure (plan area - 48sq m) over 2no. parking bays to the side of the existing building for dry valeting of motor vehicles; 3. A Single storey pitched roof storage building (plan area 25sq m) to the rear of the site; 4. All associated site works and drainage